PDA

View Full Version : Fitting a glove box light.


joonspoon
22-01-2007, 22:19
This is how I did mine.
I'm not responsible if you wreck the car you're working on!

Thanks to BlackFR for inspiring this.

I've just fitted a glove box light in my MK4 Ibiza TDi FR.

Parts list.
3B0 947 415 B Lamp (1)
1J0 947 561 C Switch (1)
893 971 632 Housing (1)
1J0 973 119 Housing (1)
000 979 133 Wire (2)
000 979 131 Wire (2)

Including VAT the total was £17.43 (as of January 2007).
***********************************************************

Cut one of each wire type in half and join one half of each wire to make a single wire with a different fitting at each end.
Push the wires into the appropriate housings and then clip the housings into the switch and lamp.
I fitted an earth terminal to make things easier later on.

Because the lamp is polarised I connected the wires like this.
Note, because the housings only fit one way make sure you push the wires in correctly!

http://i108.photobucket.com/albums/n25/joonspoon_2006/SCN/Pic2.jpg
http://i108.photobucket.com/albums/n25/joonspoon_2006/SCN/Pic1.jpg

Prise off the end panel from the dash.

http://i108.photobucket.com/albums/n25/joonspoon_2006/SCN/GB2.jpg

Look in at the top of the glove box. You will see a pre cut rectangle.
Push it out (glove box housing removed for photo).

http://i108.photobucket.com/albums/n25/joonspoon_2006/SCN/GB5.jpg

From inside the glove box feed the wires and switch through the hole and snap the lamp into place.

http://i108.photobucket.com/albums/n25/joonspoon_2006/SCN/GB6.jpg

Switch clips on here.

http://i108.photobucket.com/albums/n25/joonspoon_2006/SCN/GB3.jpg

Switch fitted.

http://i108.photobucket.com/albums/n25/joonspoon_2006/SCN/GB4.jpg

Remove this screw, slip the earth terminal under the plastic trim, align holes and replace screw.

http://i108.photobucket.com/albums/n25/joonspoon_2006/SCN/19ab6ff7.jpg

I used the live feed to my CD changer for power which I connected to using a scotch lock.
The changer is in my glove box so the supply is nice and close.
The wire I used is this one on my cable.

http://i108.photobucket.com/albums/n25/joonspoon_2006/SCN/13b31430.jpg

The light fitted and working.

http://i108.photobucket.com/albums/n25/joonspoon_2006/SCN/886ac3fa.jpg

You can use the feed from the interior light but that means removing the interior light, passenger door A-pillar trim and routing a wire behind the headlining.

Doing it this way means you only remove one trim panel.

Hope this helps someone.

Guy.

oldman
16-02-2007, 16:47
that is a very good and clear guide fella.
will look at my glove box tonight and see if i have a light and may need to follow and hope it similar for a leon

cheers, neilw

googies
19-02-2007, 20:27
you could also use the power from the Cigareete lighter, or ashtray light (not sure of location in ibiza/leon etc) be bit closer than interior light. Good guide though.

CHR15B
20-12-2007, 17:44
Got all the parts required for installation... so can confirm that exactly what Joonsoon has listed is the exact parts and quantity you require.

Will be fitting on Saturday. :)

RichieRich
30-01-2008, 19:47
Thanks guy needed one of these! such a pain in the bum tryin to see in with no light! gettin the parts orderd :)

CHR15B
30-01-2008, 20:07
When I ordered mines the parts department forgot to add VAT - BONUS!

http://img.photobucket.com/albums/v621/chr15b/Ibiza/Glovebox_Light/DSC00062.jpg
http://img.photobucket.com/albums/v621/chr15b/Ibiza/Glovebox_Light/DSC00065.jpg

RichieRich
10-02-2008, 22:19
parts arrived and already fitted with an lil extra touch blue xenon side light bulb in there looks ace :) not very blue but its like pure white with a tint of blue looks amazing :) thanks to every1 :)

BIGGY
10-02-2008, 23:34
have you got a pic of yours mate?

RichieRich
10-02-2008, 23:54
not yet but can get one, umm 2morrow now i think...

Andybon
12-03-2008, 15:34
Just been to the dealer to order all this, and it came to £29 altogether.

Andybon
13-03-2008, 14:46
Also, another place to get the live feed from, is the permanant live form the headunit (the yellow cable)

BeezaDave
24-08-2009, 23:39
sorry if im being stupid but does this mean that the light only turns on when you open the glovebox and turn off when you close it?

RichieRich
24-08-2009, 23:40
yup, why would u want the light on if it was closed? :)

BeezaDave
24-08-2009, 23:44
im trying to hatch a chicken egg and i need to keep him nice and warm.:lol:haha.

RichieRich
25-08-2009, 00:22
then take out the switch ;)

ShizTheBiz
06-05-2011, 18:29
great guide fella :y:

kavimagdani
15-11-2011, 19:56
great, thanks

mjstokes85
15-03-2013, 09:42
Great guide, I would love to fit the glove box light in my car but not sure as to where I can get a feed from. I have curtain airbags so cannot run one down the A pillar from the interior light, I have no CD changer so can't take one from that, and I don't really want to have to remove the centre console. Is there any other way I could do it?