View Full Version : Brake pads: VW part nos.
Which VWs use the same pads as my Ibiza? It has 280mm discs up front and the rears I'm not sure. I know the Pagid FRs are FR5051 for the front on my Ibiza but this doesn't seem to help too much at my local GSF.
64325F DISC PADS-PAGID FAST ROAD G3 16V 6/95 >5/96 29.00
Thanks Mark. Off to GSF this week again then.
just make suer they're for 280mm brakes :D
Mark
ibizacupra
17-12-2002, 12:34
Say G60 Corrado front pads. They might understand that.
regards
Bill
I take it Corrado G60 has the same size and fitment pads and discs then, Bill?
ibizacupra
17-12-2002, 17:14
Originally posted by edc
I take it Corrado G60 has the same size and fitment pads and discs then, Bill?
Exactly mate... G60 had them first... Parts bin special for the Beezers.
regards
bill
not to be mistaken for the fr 5050 for the 256 mm disc on the earlier gti /16v:cheers:
ibizacupra
17-12-2002, 20:09
Originally posted by jason
not to be mistaken for the fr 5050 for the 256 mm disc on the earlier gti /16v:cheers:
Exactly the same backplates between them, with thickness's being the difference. 15.6mm (16v) vs 19.6mm (G60/20VT)
You can put a 16v into a G60/20VT but not visa versa.
Interestingly, EBC's G60/20VT pad is in fact the thinner one for 16v, so you already start on a brand new pad thinner than it should be. No wonder wear is poor, when it starts off thinner.
regards
Bill
cordobabrendy
17-12-2002, 20:53
funny you mention 5050s, thats what i have on my cordy and they are working fine.
bill when i used ebc pads ,was told 16 mm for the 256mm disc 19mm for the 280 mm disc,makes no odds i won't be using them again,:cheers:
ibizacupra
18-12-2002, 08:08
Originally posted by jason
bill when i used ebc pads ,was told 16 mm for the 256mm disc 19mm for the 280 mm disc,makes no odds i won't be using them again,:cheers:
Strange.
Maybe when I first my "210" package... RSD fitted the wrong ones, as they were definately the thin pads not G60 spec. When I asked, and I did, having checked them, the replacements offered as like replacements were the thin pads.
I said no on 2 counts.. first they were EBC and had worn out in the first 2K miles of the cars life and 2nd, they were too thin and incorrect for the car. - Pagid FR5051 were supplied by replacement. - better afterwards, but Tarox G88 disks were the next weak link and horrendous on pad wear... Major cheese grator action.
regards
Bill