View Full Version : Alhambra on KW's
TimsBamma
25-04-2007, 23:01
OK I couldn't afford coilovers but here's my 02 Bamma SE on -40mm KW springs and shocks.
Reckon that the SE suspension must be lower cos I don't think its actually dropped it by that much, but hey handles a lot better, just gotta see if the V6 antirollbar is any bigger diameter might be a further improvement there...:D
Oops just realised that I don't know how to add pics. Will check out tomorrow and add then
Hmmm be interested in seeing what yours looks like on these KW ones... Same hieght as Mine I expect. And yeah handling is improved immensly.../
there are three sizes of front anti roll bar 18mm, 18.5 and 19mm strangely the 18.5 is mm is used on the VR6:blink: the 19mm on the 4motion :shrug:
for the rear only two sizes 21 and 23mm 23 on the VR6
front anti roll bar 18.5mm FM3 411 309K
mount/bush x 2 7MO 411 031 one size fits all !
rear anti roll bar 23mm 7M0511 409D
inner bush x2 511 413 B
outer bush X2 7mo 511 414C
hopes thats of help to you?
me I'm looking to replace my Fk coil overs as one of them has died :( looking like it's a WEITEC coil over kit on the cards for me :D
TimsBamma
27-04-2007, 22:52
FredT
Firstly thanks for the info on the antirollbars, saves me chasing my dealer presume the 18mm is the std tdi anti rollbar, best I guess is the 19mm for front and the 23mm rear.
Time to start saving.[B)]
Sorry to hear about the FK's (apparently GSF stock them now) Good luck with the Weitec's they're supposed to be good, made by KW (strangely the KW's were cheaper than the Weitec's) for non coilovers. Altho 50mm drop on the rear might've been better.
From gleaning info from the FAQ's I presume I have to host pics on another site and provide a link on this thread. I don't have this facility yet but will look into it.