View Full Version : My ibiza tdi 130 pictures
Flashred
13-02-2003, 18:16
http://www.autotitre.com/forum/up/1034_sna0a.jpg
http://www.autotitre.com/forum/up/1034_r1e65.jpg
http://www.autotitre.com/forum/up/1034_6a4lo.jpg
Looks mighty good to me!!
LEO LION R
13-02-2003, 18:39
Looking good, my only concern with the Ibiza is the alloys (no matter what you put on the car) look too small - why is this ?
Like the CC bits :D
:cheers:
Originally posted by LEO LION R
Looking good, my only concern with the Ibiza is the alloys (no matter what you put on the car) look too small - why is this ?
Like the CC bits :D
:cheers:
the rear wheel arch seems to be quite large, probably explaining why the alloys always look small.
slim_boy_fat
13-02-2003, 19:02
Looks good. That's the 16" Alloys you get in the seat catalogue.
You prob have to go to 18" to realy make the car stand out.
With standard 205/45/16s you would have to go for
17"
205/40/17 --- +4.9mm diameter
215/35/17 --- -8.6mm diameter
225/35/17 --- +0.07mm diameter
235/35/17 --- +0.21mm diameter
18" Are a bit more tricky as they are all 30 profile (i.e. scotch tape)and have never sen exotic tyre like these tho i belive they exist!!
215/30/18 --- -4.7mm
225/30/18 --- +1.3mm
235/30/18 --- +0.29mm
The difference + or - 8mm makes is about 1.5% in speedo error i.e. at 100mph you will record +/- 1.5mph
Not too much, esp as your own tyrs will reduce by about 10-12mm over there life!
What a boring life i live!!!
Cheers
:cheers: (the tyre daddy)
LEO LION R
13-02-2003, 19:08
What a boring life i live!!!
Cheers
:cheers: (the tyre daddy)
RATFLMFAO
you said it, not us ;)
:devil:
Do you think an arch kit (if it were available) would do the trick ?
So that the space was less and it would also flare the arches slightly to line better with the new fat rubber. Just a thought, yes it happens now and then :redface:
Originally posted by LEO LION R
What a boring life i live!!!
Cheers
:cheers: (the tyre daddy)
RATFLMFAO
you said it, not us ;)
:devil:
Do you think an arch kit (if it were available) would do the trick ?
So that the space was less and it would also flare the arches slightly to line better with the new fat rubber. Just a thought, yes it happens now and then :redface:
What might really do the trick is lowering + some wheel spacers. Not saying that the flares wouldn't help either.
slim_boy_fat
13-02-2003, 19:28
Who said flairs???????????????
70s revival
That will be a first Leo!!:idea: :p
Lowering it with 17s on makes it look much better.
Flashred
05-03-2003, 11:44
Prewoodec red Board :D
Flashred
05-03-2003, 11:46
Je Design sticker
Flashred
05-03-2003, 11:46
;)
Looks really good Flashred.
Damn I ordered the prewoodec carbon fiber a way back and still haven't received it from the importer:(. Time to make a few phone calls.
Nice, the colour coded strips I have had since September MUST be sprayed up soon!
Two notes...
1) You don't have climate control...is it an option on yours?
2) You have an armrest...is it any good?
[Edited because I'm useless!]
Is that the soft dash pack on there as well.
Flashred
05-03-2003, 22:10
1) You don't have climate control...is it an option on yours? 2) You have an armrest...is it any good?
1)I have a semi-automatic climate control
2)My arm rest is comfortable, You can open it to put sunglasses, portable phone, money...
It's not a painting dash board job, you just stick it, it's a model only for ibiza 2002.
more informations there (http://www.prewoodec.de)
german quality
5 years warranty
Red dash bits are nicer than I expected to be honest. A bit much in YELLAH! though methinks :D
Originally posted by Flashred
more informations there (http://www.prewoodec.de)
german quality
5 years warranty
I agree that is good quality. I've seen them and ordered the carbon fiber one. Still waiting for it.
Originally posted by RB5
Red dash bits are nicer than I expected to be honest. A bit much in YELLAH! though methinks :D
Yeh but the aluminum one would probably look the tits in a pair of ibizas tdi sports 1##:D :p
Flashred
05-03-2003, 22:38
RB5 ! for you dude ;)
I've just found out I'm a tart! I like that, but it needs the bit above the glove box.
I want a brushed aluminium one, how much are they?
Flashred
06-03-2003, 15:32
a nice yellah !
Originally posted by Flashred
a nice yellah !
Shit that looks great. Maybe I can get my toledo painted Yella:p
Flashred
06-03-2003, 15:41
I want a brushed aluminium one, how much are they?
I pay 170£ for my Prewoodec
Looking at their website they don't appear to do RHD versions yet. However Halfords stock their products and have the MK2 and MK3 ibiza listed so its only a matter of time.
Originally posted by toXXin
I want a brushed aluminium one, how much are they?
Well the carbon fiber one I have on order was/is 150euros. I ordered it in january though.
Originally posted by Rage
Looking at their website they don't appear to do RHD versions yet. However Halfords stock their products and have the MK2 and MK3 ibiza listed so its only a matter of time.
The centre section is ambidextrous(sp?) though, surely?
Unfortunately not the hazard lights are on the wrong side on LHD cars and there is a cut out section for the button http://www.prewoodec.de/images2/20433.jpg
Also the section that surrounds the light switch is round the wrong way.
If there are only those 2 differences, then I'm sure they'll have one out in a short period of time.
Obviously most of the bits need reversing. however the bits that go around the gear stick and on the ashtray will fit fine. also the bit that goes around the edge of the not very useful pocket under the stereo.
Flashred
07-03-2003, 17:49
http://www.seatcupra.net/forums/attachment.php?s=&postid=152293 http://www.seatcupra.net/forums/attachment.php?s=&postid=152295 http://www.seatcupra.net/forums/attachment.php?s=&postid=152301 http://www.seatcupra.net/forums/attachment.php?s=&postid=152318 http://www.seatcupra.net/forums/attachment.php?s=&postid=152322 http://www.seatcupra.net/forums/attachment.php?s=&postid=152324
I like the other TDI, what bumper/add on is that and how much are they?
I'm debating whether to get it or not!
Flashred
07-03-2003, 18:27
It's an Autotest design kit (http://www.autotest.it)
Fen, these eyebrows might solve your problem with the leading edge of the bonnet. What do you think ?
http://www.autotest.it/seat/images/popup/ibiza2002/ibiza2002d_35.jpg
They look about as tasteful as a leopard skin sofa.
For eyebrows they don't look half bad. The sacrificial leading edge idea isn't bad either. Unfortunately I now have a crater on the bonnet itself which no eyebrow / light protector etc. would have prevented.
Originally posted by Rage
They look about as tasteful as a leopard skin sofa.
Have you been watching to many Austin Powers movies. :D ;)
Flashred
08-03-2003, 16:29
http://www.seatclubfinland.com/tapahtumat/metroauto/pacecar2.jpg http://www.seatclubfinland.com/tapahtumat/metroauto/pacecar1.jpg http://www.seatclubfinland.com/tapahtumat/metroauto/pacecar4.jpg http://www.seatclubfinland.com/tapahtumat/metroauto/pacecar5.jpg
That looks gorgeous. I really like that front bumper mod.
Edit: does anybody know who the UK distributor is ? I can't seem to get their website to tell me.
Now I want a ibiza 130 with all the goodies.:scream:
No exhaust cut-out in the back valance tho :rolleyes:
I like that one too. And it isn't a complete front end (so cheaper, presumably) without looking like a tacked on lump of tat. And it's not too Max Power. :thumbsup:
Was wondering how you'd get to the towing eye hole though.
It's far enough over to be behind the mesh, isn't it?
slim_boy_fat
08-03-2003, 22:29
The front really does look good, but i prefer to look mundane in standard drag. All the better to blow away unsuspecting BMW Ci drivers....And watch them trying to catch up.....
It's far enough over to be behind the mesh, isn't it?
Yep I think you might be right. I assume to 2 black dots to the upper sides of the mesh are screw holes to allow you to remove the mesh and get to the tow point.
From much investigation I have deduced that the UK distributor used to be RA-design. However their website no longer seems to exist and they aren't listed at all on the autotest website. The netherlands distributor will ship overseas but expect a hefty tax bill from customs. I'm going to talk to my friendly supplier of bits and see if they can get in contact with autotest and get set up as uk distributor.
Originally posted by Rage
The netherlands distributor will ship overseas but expect a hefty tax bill from customs.
Not true Simon. As long as it's from the EU, which it is, no customs!:D. Obviously, you'll be charged VAT though (at Holands rate).
edit:
Make sure you find out if the price already includes VAT. In Portugal the prices by law must already include VAT (@19%).
All that stuff looks cool but I'm not too sure on my car as I'm going for a different look.
The wheels on that car look well nice! :)
Flashred
29-04-2003, 00:28
http://tibiz.free.fr/images/fr01.jpg
http://tibiz.free.fr/images/fr02.jpg
http://tibiz.free.fr/images/fr03.jpg
http://tibiz.free.fr/images/fr04.jpg
http://tibiz.free.fr/images/fr05.jpg
Nice.
That is pretty much the same interior as what I was thinking I would do to mine when I get it, except I'm going for black magic metallic as appoased to flashred.I might have to think of something else tho, don't want to be too similar.
I like the front grill too, but I think I would miss the S badge.
Cheers
Love the front grilles!
How could anyone miss that gormless great S on the front?
Looking even better! :jog:
Flashred
12-06-2003, 23:02
:rockon:
Flash, i love the pics, your car looks great. I was wondering if you could let me know where you got the front grills? I have a black 130tdi and i think it would look good with those grills. i have the chromed ones at the minute.
would appreciate it if you could let me know,
Cheers Jono
Is that new lower front bumper a Seat part or a 3rd party one. Just asking cos MK Seat had a 130 with the same bumper at Silverstone a couple of weeks ago.
Yes I was going to say that looks exactly the same at the SEAT UK demo car that was at Silverstone.
Apparently according to SEAT UK that bumper hasn't even got a part number as it's a prototype.
nickholland
23-06-2003, 09:59
Is the seatsport kit available yet? I REALLY like the look of it.