View Full Version : DPM Opening Offers!
Damian @ DPM
27-03-2008, 10:46
These opening offers are available until April 26th.
Forge 007P DV - £85 delivered (normally £90)
Forge Splitter DV - £125 delivered (normally £137)
All Forge TIPs - £115 delivered (normally £131)
5% Off All Weitec & KW Suspension
5% Off All Remaps
10% Off All H&R Spacers
Thanks,
Damian @ DPM
Damian.
How much for spacers for an LCR, set of four
Not sure what size i should go for, ideally minimum size all round.
Cheers
Damian @ DPM
18-04-2008, 10:02
Morning,
We only do hubcentric so the minimum size we do is 10mm either side, 20mm on the axle and they're £79 a pair minus your £7.90 worth of forum discount so for the 2 sets with bolts would be £142.20 plus £12 postage.
Thanks,
Damian @ DPM
Cheers for that.
Yea looking hubcentric, but what size can you recomend F&R?
I do have coilovers,so things shouldnt be any different?
nice
Damian @ DPM
20-04-2008, 23:10
15mm rear and 10mm front seems to be popular and look right with the LCR. What wheels are you running?
Damian @ DPM
Damian. Im running standard LCR alloys with a 30mm drop all round.
I personally would like 10mm rears but slightly less on the fronts, which i dont think is possible size??
nice
Damian @ DPM
22-04-2008, 09:14
10mm is the lowest we do in the hubcentric foxes, 8mm is available but not hubcentric.
Damian @ DPM
Cheers Damian. Considering if i need spacers on the front.
Its a tough choice
ta.
Damian @ DPM
22-04-2008, 23:47
No problem, any questions just give me a shout.
Damian @ DPM
CupraElliott
23-04-2008, 20:03
Got any results/logs on any of your custom maps Damian?
I am after a custom map. I am only boosting 15psi peak the mo and want to be peaking around 22-24psi and settling at about 20, sound about right for a ko3s? Hoping for around 250 bhp.
Damian @ DPM
23-04-2008, 22:15
Think you'll be pushing it to get around 250 mate, what else you running?
Damian @ DPM
CupraElliott
23-04-2008, 23:06
Mods are all in my sig.
Damian @ DPM
23-04-2008, 23:11
Is that the current figure with all your mods on?
Damian @ DPM
CupraElliott
24-04-2008, 17:36
No mate that figure was with CAT back exhaust, running around 12 psi and BMC filter.
Since added....
KO3s
THS FMIC
THS high flow mani
Forge TIP
Forge SplitR
And before the map I will have a 4 bar FPR on and either bigger DP and sports CAT or bigger DP and de-cat
Just wanting the best from my KO3s really.
Damian @ DPM
24-04-2008, 17:38
Should easily be able to get a godd figure but as said, may be pushing to get 250.
Damian @ DPM