PDA

View Full Version : aerial booster adapter - whats the blue lead for?


m.r.davies
12-09-2008, 07:41
Hi

As the title suggests, whats the blue lead for,

I'm guessing its power, but how do i rig it up?
ideally i dont wantt to be finding a 12V feed etc


how have others done it?

CoW
12-09-2008, 13:57
Not sure if it's right... but in the past i've just tapped in to the power feed from the ISO Harness.

m.r.davies
12-09-2008, 14:11
Thanks CoW

do i have to cut cables and crimp etc?

m.r.davies
12-09-2008, 14:20
Found the answer.......so for the forum:

http://www.incarexpress.co.uk/page.php?content=beesting


---------------

Dont use the power antenna cable,
use blue amp remote cable

You should have 2 blue wires coming out of the back of the new head unit, one for the power antenna and one for the amp reomte. One of them should have a little white sticker wrepped around it to tell you what it is (not sure which one, but one will get better reception)


--------------

DannyC87
12-09-2008, 15:09
and if you don't have a remote wire coming out the hu, you can tap the blue wire in the iso loom.

m.r.davies
12-09-2008, 17:03
Thanks Danny

Do know which colour lead if goes into?

DannyC87
12-09-2008, 17:28
the blue one is the illumination iirc so that will go on and off with the radio. thats the one i used and it works fine.