View Full Version : Electrical connection plugs
Damoegan
21-12-2008, 09:03
Hi Sam
Is there any chance you could het hold of some electrical plugs for me?
I'm after the plug side to these VVVVV
http://i202.photobucket.com/albums/aa275/damo_egan/P20-12-08_140901.jpg
I have just removed the SAI, N249 & N112 valve clicky, (http://www.seatcupra.net/forums/showthread.php?t=200030) and I'd like to solder the resistors into the plug side so they be easily removed if and when I go back to standard.
So you want a 2-PIN Bosch "D" connector for N75 and FSI air temperature correct?
ibizacupra
21-12-2008, 18:06
N75's are 2 pin "mini timer" plugs Sam.. this is different connector
N75's are 2 pin "mini timer" plugs Sam.. this is different connector
Some of them came with the D connector and some came with the regular Bosch 2-PIN that you find on the injectors and other sensors.
I will post a picture when I get it on tuesday or so.
Damoegan
21-12-2008, 20:58
Sam, they are 2 pin and they are D shaped so I'm not to sure. I'll try and get a better pic for you.
wild willy
21-12-2008, 22:38
Being able to purchase the various plugs and sockets in the engine bay would be a real bonus.
I can get whatever plugs you want.If it comes on an OEM harness then I can get it in both male and female format.
Do not forget 034EFI was the first standalone to offer plug and play systems for VAG engines.All harnesses were built from Scratch!
wild willy
22-12-2008, 09:14
I can get whatever plugs you want.If it comes on an OEM harness then I can get it in both male and female format.
Do not forget 034EFI was the first standalone to offer plug and play systems for VAG engines.All harnesses were built from Scratch!
Thats awesome, very difficult to find those parts over here unless you buy complete a harness.:)
Damoegan
23-12-2008, 19:48
These are the plugs that I'm after, Sam.
http://i202.photobucket.com/albums/aa275/damo_egan/P22-12-08_1228.jpg
http://i202.photobucket.com/albums/aa275/damo_egan/P22-12-08_1227.jpg
So you want the male plug for that correct?I have them
Damoegan
24-12-2008, 10:14
Yea, I want one of these
http://i202.photobucket.com/albums/aa275/damo_egan/P22-12-08_1227.jpg
So I can solder the resistors on the end to go into this one
http://i202.photobucket.com/albums/aa275/damo_egan/P20-12-08_140901.jpg
Send me a PM with your mailing addresss
Damoegan
19-02-2009, 07:15
:wave:
Ric 2001
19-02-2009, 08:27
I've asked for these too. He said he is going to start a thread so peolpe can buy them.
Damoegan
19-02-2009, 09:13
I've asked for these too. He said he is going to start a thread so peolpe can buy them.
Whan did you ask for them, Ric?
Ric 2001
19-02-2009, 15:04
I asked 2 weeks ago but PM'd Sam yesterday to remind him.
Damoegan
19-02-2009, 16:17
Sam actualy PM'd me the other day telling me to keep an eye on this thread as he had a update or something.
Guess he must be very busy..
Going to do it now....
Sorry guys I have been extremely busy but staff are helping.I will upload the pics today for you.So sorry.
Damoegan
21-02-2009, 21:35
No probs, Sam.
I knew you would get round to it when you had more time.
Okj I have 2 male connectors here.I need to know which female connector you have...
This?
http://i226.photobucket.com/albums/dd25/issamabed/PARTS%20FOR%20SALE/DSC_4373.jpg
http://i226.photobucket.com/albums/dd25/issamabed/PARTS%20FOR%20SALE/DSC_4374.jpg
Damoegan
24-02-2009, 06:16
Okj I have 2 male connectors here.I need to know which female connector you have...
This?
http://i226.photobucket.com/albums/dd25/issamabed/PARTS%20FOR%20SALE/DSC_4373.jpg
That looks like the right one, Sam..
Ok
just to be clear that is FEMALE
you want the MALE connector?
Sorry I did not take care of this sooner....I am SWAMPED with work.It is now 6.41 am and when I made my last reply I crashed.
Damoegan
24-02-2009, 15:00
Yes, I need the opposite to the one on the pic please Sam.
Ric 2001
25-02-2009, 09:49
:wave: don't forget about me.
Also, what are the prices of your Quiafe diff's at the moment? (don't know the gear box code) either 02J or 02A
Ok lads,I will sort this out today...I have not forgotten about either of you.I will get around to it eventually
I need the box code.
Damoegan
25-02-2009, 18:48
I need the box code.
What box code is that, Sam?
Ric 2001
26-02-2009, 11:35
I was asking about a diff he needs my gear box code.. all I know is that.. GVZ is the transmission code
Damoegan
26-02-2009, 15:10
I was asking about a diff he needs my gear box code.. all I know is that.. GVZ is the transmission code
Ah, got you now.
Ok connectors are here.Who wants and how many?
Damoegan
01-03-2009, 06:13
3-4 depending on price mate.
Ric 2001
01-03-2009, 07:36
3-4 depending on price mate.
Same
Ok got the pricing today for the male connectors,we are looking @ 11.56 CAD each
sorry guys I have not been on top of this....no excuses I just have been extremely swamped.
Ric 2001
03-04-2009, 12:33
At around £7 each, I'll have 4 then please
Damoegan
03-04-2009, 14:27
4 for me too please :)
Ric, do you want to just get the lot shipped to one address (me or you) and us forward to one another and split the cost down the middle?
Ric 2001
03-04-2009, 15:03
Sounds good to me. Ship then to you if you want. BTW thanks Issam got the Dif today
Damoegan
03-04-2009, 15:05
Sounds good to me. Ship then to you if you want
No problem mate :)
Damien, Im a bit confused, how many plugs do I need all in all if doing SAI, N112 and N249 and replacing with resistors?
Prebs
Damoegan
03-04-2009, 20:43
Damien, Im a bit confused, how many plugs do I need all in all if doing SAI, N112 and N249 and replacing with resistors?
Prebs
Just 3 iirc mate, just after 1 for a spair.
Thanks Damien...
Issam: I´ll be up for 4 of these aswell shipped to Norway. How do I place my order???
Prebs
Jesus
so thats 12 of these so far
anyone else!?
I will ship 8 to the UK in 1 box and 4 to Norway
sure you dont need anything else as shipping is pretty much flat rate if it is under a certain weight.
Issam: How do you want paymet done, and do you want my adress for shippment (to Norway) on mail?
Prebs
Issam: How do you want paymet done, and do you want my adress for shippment (to Norway) on mail?
Prebs
I deal with paypal
best way is to email me and go from there.
Ric 2001
07-04-2009, 09:14
Jesus
so thats 12 of these so far
anyone else!?
I will ship 8 to the UK in 1 box and 4 to Norway
sure you dont need anything else as shipping is pretty much flat rate if it is under a certain weight.
Think I may change my mind... instead could you the GB price for Powdercoated Valve cover & Coil Pack cover, valve cover powdercoated in red and a satin black coil pack cover with a stock fitting in there. Then I can change the fitting at a later date for a silicone or braided hose.
Then in that box could you throw in the 8 connectors?
Think I may change my mind... instead could you the GB price for Powdercoated Valve cover & Coil Pack cover, valve cover powdercoated in red and a satin black coil pack cover with a stock fitting in there. Then I can change the fitting at a later date for a silicone or braided hose.
Then in that box could you throw in the 8 connectors?
We are doing a wrinke read batch of valve covers this week.You want wrinkle red or normal gloss red?
Ric 2001
07-04-2009, 12:47
We are doing a wrinke read batch of valve covers this week.You want wrinkle red or normal gloss red?
What's the colour in the first picture?
http://www.seatcupra.net/forums/showpost.php?p=1974100&postcount=1
Issam, whats your email adress?
Ooooh, have these been sent yet?
I could really do with one to plug into my N249!
Damoegan
08-04-2009, 09:54
Ooooh, have these been sent yet?
Not yet mate :)
Count me in for 1 then please!
Ok I just ordered more....will update when they come in.
Who says I dont care about the little guys :P
Ric 2001
09-04-2009, 06:45
What's the colour in the first picture?
http://www.seatcupra.net/forums/showpost.php?p=1974100&postcount=1
bump
bump
Sorry mate
that is wrinkle red.
Ric 2001
13-04-2009, 09:37
Think I may change my mind... instead could you the GB price for Powdercoated Valve cover & Coil Pack cover, valve cover powdercoated in red and a satin black coil pack cover with a stock fitting in there. Then I can change the fitting at a later date for a silicone or braided hose.
Then in that box could you throw in the 8 connectors?
So I'll go for this then
Wrinkle red and a satin black coil cover please.
Couldn´t get a hold of my buddy with paypal account today will try again tomorrow. You dont take mastercard right?
Prebs
How are we doing delivery on the plugs? Is one of going to get them sent over and then send them out to the rest?
Damoegan
17-04-2009, 07:11
How are we doing delivery on the plugs? Is one of going to get them sent over and then send them out to the rest?
Sounds like a good plan.
Ric 2001
17-04-2009, 08:36
Ok got everything in :D
Does this include the Valve cover and coil pack cover?
I take full delivery of the valve cover, coil pack and 9 connecters now... Than I’ll redistribute
So that would be $300 for the valve cover + coil pack cover
and 104.31 CAD for plugs
Damoegan
17-04-2009, 11:22
Just let me know how much I owe you Ric, and I'll sort you out. Paypal ok?
Ric 2001
17-04-2009, 11:43
sure
Does this include the Valve cover and coil pack cover?
I take full delivery of the valve cover, coil pack and 9 connecters now... Than I’ll redistribute
So that would be $300 for the valve cover + coil pack cover
and 104.31 CAD for plugs
Do you mind taking a couple more for some guys in Norway?
cheaper to ship from you to them than from me to them
who else wants connectors....
Do you mind taking a couple more for some guys in Norway?
cheaper to ship from you to them than from me to them
who else wants connectors....
That would be great, I will cover the expences if needed from uk to me in Norway.
Issam please mail me your paypal account and total cost when ready:)
Prebs
Will do Prebs,
got your email here sitting.
Ric 2001
20-04-2009, 08:52
Do you mind taking a couple more for some guys in Norway?
cheaper to ship from you to them than from me to them
who else wants connectors....
Sure...
Are we all ready then?
Pay for everything tomorrow Tuesday 20th April