PDA

View Full Version : Vag Com help request -Loughborough (Leicestershire)

markgb
01-03-2009, 20:12
Hi all,

Had anyone got access to VAG.com in the Loughborough (Leicestershire) area?
My EML had come on, but all seems ok with the engine, (not in limp mode).
went to put the car in the garage, and the light came on.

I have put a BMC induction kit on last week, and yes it has got the SPT R valve on (which has been on for approx 4 months).

Could it be the MAF?

There is no loss of power, and no other warning lights are on.
Are there any test I can do: confused::confused::confused:

Thanks on advance.
ArosaRacer
01-03-2009, 22:34
can you get to Kirby muxlowe were widsons group are as im there tomorrow night about 8 ish at TNT Glenmore depot
DannyC87
01-03-2009, 23:33
yep; got it in Loughborough - I'm free around 4-6pm tomorrow, or tuesday early evening?
markgb
02-03-2009, 08:13
can you get to Kirby muxlowe were widsons group are as im there tomorrow night about 8 ish at TNT Glenmore depot

Thanks for the offer mate, really appreciate it. I'm gonna see if I can get round Danny's.
Saves the mileage on the car.
markgb
02-03-2009, 08:13
yep; got it in Loughborough - I'm free around 4-6pm tomorrow, or tuesday early evening?

PM Sent.
markgb
02-03-2009, 18:21
Big Thanks too DannyC87, who had VAG.COM.

It turn's out that the ECU doesn't like the BMC induction kit, due to the Secondary in take pipe (only on Cupra's)

16795 - Secondary Air Injection System – Incorrect flow detection
P0411 – 35-00

How do I rectify this, as I don't want to take the BMC off.
excaliber20vT
02-03-2009, 18:41
Mark, i was gonna get the BMC kit!, is it this way on all Cupras?
markgb
02-03-2009, 18:54
Mark, i was gonna get the BMC kit!, is it this way on all Cupras?

Yes mate,

this link shows the similar setup to what I have done.
http://i725.photobucket.com/albums/ww253/danspics2007/uncovered-1.jpg

Although the noise on the BMC with the Forge SPLT R valve sounds great.
excaliber20vT
02-03-2009, 19:00
Whats the wiring, ground earthing kit?
bet you dont know how to bypass n74 / 249 valve?
markgb
02-03-2009, 19:02
Whats the wiring, ground earthing kit?
bet you dont know how to bypass n74 / 249 valve?

Erm no sorry mate. I'll have a look round on the forum for you mate.
excaliber20vT
02-03-2009, 19:12
Cheers buddy ;), how do you exchange mobile no's here?:)
ArosaRacer
03-03-2009, 00:34
Mark try fitting a little air filter on the secondary air pump feed as mine came with one when i fitted my ABD kit
markgb
03-03-2009, 09:15
Cheers buddy ;), how do you exchange mobile no's here?:)

PM Sent.
markgb
03-03-2009, 09:17
Mark try fitting a little air filter on the secondary air pump feed as mine came with one when i fitted my ABD kit

Got one from Halfords, the same day I fitted the kit.
It's been on for a week, but only came on Sunday night. DannyC87 has cleared the code for me.

It might be that the pipe has disturbed the something. I've got some Pclips to secure it properly.

Fingers Crossed.