Vf23 Oil and Coolant lines

[DaNnY_LaD]

Hi jabba

ive got a IHI Vf23 and wondering could you make me up Some oil and coolant lines for it..

thanks

[DaNnY_LaD]

anyone please

[DaNnY_LaD]

anyone?

[jabbasport]

Hi Danny,
Could you run over your setup with me please, our lines are made up to specification of our cast manifold (length of pipe, angle of attack etc) so may be different for your particular application...

Thanks
Kev

[DaNnY_LaD]

Hi Danny,
Could you run over your setup with me please, our lines are made up to specification of our cast manifold (length of pipe, angle of attack etc) so may be different for your particular application...

Thanks
Kev

Hi mate..

My setup is:
IHI Vf23 Turbo With P20 exhaust housing
Tig-art tuburlar manifold
3'' Turbo intake pipe
2.5 Milltek Catback System With no silencer
Custom 3'' downpipe with 2.75 De-cat
3'' S3 Maf
Blue Top 470cc Injectors @ 3bar
Bosch 3bar FPR
Jetex Filter
Oil catch tank
Forge Dump valve With Yellow Uprated Spring
Forge Dump Valve Relocation Kit
Large Custom Intercooler
63mm Charge Pipe And throttle Bodie pipe Work
Sai Removal
Egr Removal
N112 Removal
N249 Removal
Bosch Rated Coilpacks
Helix Vr6 Clutch with ARP bolts
Fiblanza Lightened G60 Flywheel
S.E.M Large Inlet manifold with 70mm TB
Denso Ik22 Cold grade spark Plugs
Intergrated Engineering Connecting Rods With 20mm Wrist pins

Or is it a simple thing i could make my self? with the correct banjo size ect....as ive been doing the conversions all my self..

[jabbasport]

Which lines specifically do you require? I could probably sort out a "kit" for you as such. Correct oil and water fittings and a length of braided hose which you can cutdown to size and put the fittings onto.

[DaNnY_LaD]

How much for the oil and coolant lines (Kit) posted?

I just need the oil and coolant lines to bolt it up..would the bolts and washers be supplied too?

I seen the kit on ebay todo it your self isnt that much really but would be better with the correct banjos ect...

I dont have a problem with cutting the braided lines down at all...

if the price is right can i ring up and pay over the phone?

[DaNnY_LaD]

Any New jabba?

[DaNnY_LaD]

Hi jabba

I've Rang up twice now and i know you are very very busy as you receptionist had said...But any luck with them..

If not il have to try and source these else were...

thanks

[DaNnY_LaD]

Dosnt matter now jabba ive sorted the oil and coolant feeds..

Could i have a price on a JS modified banjo bolt to use with the OEM K03 oil feed line