View Full Version : How to reach Ibiza Cupra 1.8 20VT radio and where is the cd changer plug
Surfer_D
01-01-2002, 10:37
Hi!
1. How can I reach the cupra radio for mounting the connector for RCA output.
2. Is there a connectore somewhere for the CD-Changer or I should buy one for my self and plug it into the radio.
Please tell me that I don't have to dismount the radio and heater trim!
Thanks;
Dave
Happy New Year 2002
:cheers:
primekart
01-01-2002, 11:19
The CD connector is in the far lower left side of the boot, close to the back seat. Pick up the floor cover and look under the left side trim. The cable connector is hiding there and there is an opening in the lower left side trim for it.
As for the RCA connection - To the best of my knowledge it is accessible after dismounting the glove box and the black plastic under cover on the passenger's side. From the same openning the cellular phone connection should also be available. Since I did not try it myself, I would rather confirm it with others who did.
http://www.seatcupra.net/bezrad.shtm
this will help with the radio end , as you see there is NO RCA output so you will need a convertor
as for CD changer :
inside boot on the left there is 3 bungs behind the side carpet for which the mountings go , on that passenger side trim you will see a lump , the CD connector is under there
look out soon for a pic fitting guide to go alongside the radio one
primekart
02-01-2002, 06:21
No RCA connections? What about the cell phone connection?
Surfer_D
02-01-2002, 08:23
:cheers:
Hope to see you guys one day....
Dave
Slovenia
Originally posted by primekart
No RCA connections? What about the cell phone connection?
runs into wires in the ISO connectors
primekart
02-01-2002, 21:03
ISO connectors? Now you got me :eek:
What are those? Where do I find it? Have you got a picture or scheme?
try this :
http://www.seatcupra.net/bezrad.shtm
this in particular , the black connections are ISO http://www.seatcupra.net/images/amethyst/radio/beezaradio01.JPG
in process of sorting a pin by pin description if it helps
primekart
02-01-2002, 21:27
Do I have to get the whole unit out or is there a way to get to the ISO connectors from the side? (glove box?)
sorry , easiest way is from the front , only 6 screws
Icecavern
07-01-2002, 11:39
Don't worry anbout removing the panel, it's very simple. And unlike fords etc it goes back on properly too....
Pete
Surfer_D
07-01-2002, 19:21
:cheers: