View Full Version : Heat shield
Hi, I was wondering whether it is possible to purchase the heat shield which comes with your jabba induction kit on it's own? I have a Mk1 Leon Cupra R.
Thanks,
EL
jabbasport
13-10-2009, 10:01
This is possible yes..
The shield on its own comes out at £45 inc VAT. Plus postage, unfortunately because of size and weight, you're looking at around £10 postage...
Thanks for the reply. Whats the best way to order this?
Cheers
jabbasport
13-10-2009, 10:22
Just drop me a call and i'll take payment details. Can get this item out the door today..
Thanks
RichStew
13-10-2009, 12:45
I'll second this, are you able to sell the mk3 ibiza cupra induction kit heatshield seperately?
how much inc postage would this be?& does it include all fixings
jabbasport
13-10-2009, 13:24
The same as above.£55 delivered, this is just for a trimmed panel and will use standard mounting points...
BoomhaueR
13-12-2009, 18:24
I'd like to order one of these if you have some in stock? I will call tomorrow.
Cheers
BoomhaueR
14-12-2009, 22:27
For those interested in this I called Jabba today to order the heatshield and it was actually £65 posted for the shield, rubber bits and a metal mounting bar apparently.
jabbasport
15-12-2009, 10:31
Apologies, i was just quoting for the panel on it's own. The extra cost is for the mounting rubbers and bar like you've said.
Thanks
Kev
wild willy
12-04-2010, 10:03
I like to buy this shield for my Jetex cone which is 175mm btm x 140mm top x 172mm long, will it fit ok. Also what is the maximum size cold air feed i can run to it from the stock position without cutting or adapting the shield.
What is the rubber for thats supplied to it.
Hey Wild Willy, that is the Jetex FC-08001 filter right? Thats the one I have, this is how it sits........
http://img251.imageshack.us/img251/3430/04042010350.th.jpg (http://img251.imageshack.us/i/04042010350.jpg/) http://img641.imageshack.us/img641/6024/04042010351.th.jpg (http://img641.imageshack.us/i/04042010351.jpg/) http://img532.imageshack.us/img532/6281/04042010349.th.jpg (http://img532.imageshack.us/i/04042010349.jpg/)
At the moment I have a 3inch cold air feed but there is room for a bigger one, say half a inch bigger or so!
Just so you know I cut the shield to accomodate the strut brace!
wild willy
12-04-2010, 14:34
Thats great, thanks mate. :)
jabbasport
12-04-2010, 16:09
Thanks for that EL :)
Kevin
wild willy
12-04-2010, 17:27
Ordered.:cheers:
My pleasure :D
It is a great choice Wild Willy!!
Mashburn
12-04-2010, 20:04
I like to buy this shield for my Jetex cone which is 175mm btm x 140mm top x 172mm long, will it fit ok. Also what is the maximum size cold air feed i can run to it from the stock position without cutting or adapting the shield.
What is the rubber for thats supplied to it.
I have a 3" feed and it fits perfectly.
wild willy
19-04-2010, 10:11
Jabba Sport,
Give Carol a long tea break so she can nip out and buy the edging strip for the heat shields.;). My motor needs it.:)
jabbasport
21-04-2010, 09:34
You should have it today :)
Kev
wild willy
21-04-2010, 10:07
You should have it today :)
Kev
Just unpacked it thanks. Looks a very sturdy well made piece of kit, alot more substantial than i was expecting. I'll hopefully put some logs up at a latter date. Engine bay p*rn, hmmmm.:cheers:
George 3G
11-09-2010, 10:49
Would this fit with my air filter?
http://img.photobucket.com/albums/v248/BlAck0ut/IMG_0928.jpg
Only thing that will get in the way is your over grown clamps :p The one closest to the filter will need to be changed for a slimmer one or you can try and see if you can move it slightly as the shield sits about there
George 3G
11-09-2010, 19:02
I have some 80-100mm Jubilees sat next to me waiting to go on :P
I may put the standard airbox back on yet
Mashburn
12-09-2010, 19:08
I cant see why not George.
And if it doesnt you will sell it on here easy.
Can i get one of these for my ibiza Mk3 please?
jabbasport
28-03-2011, 11:54
Sure, just drop Carole a call on 01733 211446
Cheers
Kevin
Sure, just drop Carole a call on 01733 211446
Cheers
Kevin
Thanks Kevin, will ring Carole shortly.
Will it be a straight fit?
aaronipswich
28-03-2011, 14:30
will the heatshield be ok for the badger5 induction kit
aaronipswich
10-04-2011, 18:54
Hi ya is the price still £65 posted for the Leon mk1 cupra r
jabbasport
12-04-2011, 09:20
Hi,
They're £65 plus vat, plus delivery.
Thanks
Kevin
aaronipswich
12-04-2011, 10:01
Cool thank you so all in will be about £90
And do you have these in stock ready to go ?
also do you accept paypal ??
jabbasport
12-04-2011, 11:38
Yeah that's correct.
We make them to order, so allow a day or so.
We can take paypal if needed.
Cheers
Kev
aaronipswich
12-04-2011, 12:24
Yup that's cool if you pm me me all the details I'll do it now for you
jabbasport
12-04-2011, 12:55
Hi,
You'll have to drop carole a call on 01733 211446 and she'll take the order from you.
Thanks
Kevin
aaronipswich
12-04-2011, 15:49
Cheers Kevin for the help
Phoned Carol up and she is finding out about the paypal then going to phone me back
Hi Jabba, Price for these is still £65 including mounting rubbers and bar(everything required basically for fitting) ??? + vat and postage??? for mk1 LCR?
Regards
Tom
jabbasport
31-08-2011, 15:30
Hi
I think they've gone up slightly since the start of this.
Could you drop carole a call on 01733 211446 to confirm.
Thanks
Kevin
Hi
I think they've gone up slightly since the start of this.
Could you drop carole a call on 01733 211446 to confirm.
Thanks
Kevin
cheers for the rapid reply Kevin,how much is slightly?;) Do you get any discount for being a member on here?
Thanks
Tom
Just ordered one :D
For everyones info these are £95 inc VAT and delivery
Tom