*** INA : 1.8T Catch can & Silicone Hose Extraveganza - Every silicone you will ever

[INA]

After a couple of months of taking a relapse we now have every single silicone hose you can think of for the 1.8T breather system and we are are selling the hoses separate OR together. Guys because you are in the UK it might be cheaper to buy in bulk as always.[;)]

*******************

SCN PRICING (SHIPPING INCLUDED) :
Complete Catch can kit = 279.99 USD SHIPPED
Complete Breather Hose kit = 169.99 USD SHIPPED
Valve Cover Breather Hose - (06A 103 221BH / 06A 103 221AN) = 94.99 USD SHIPPED
Block to Intake Manifold Hose - (06A 103 221BK) = 64.99 USD SHIPPED

READY TO ORDER? GREAT!
PLEASE SEND PAYMENT VIA PAYPAL TO SALES[AT]INAENGINEERING[DOT]COM (CLICK HERE) (mailto:sales@inaengineering.com)[/b]


In the paypal window include the following:
* VWVortex Screen Name
* APPLICATION : Audi A3 1.8T / MKIV VW Golf GTI / MKI Seat Leon / Skoda Octavia
* FULL NAME & Mailing Address
* Telephone number
* email address

*******************


Catch Can Breather Kit, MK4 1.8t
Complete breather kit for the 1.8t GTI, fully bolt in for stock application and fully modified cars. Neatly replaced the relay cluster mounted on the drivers side fire wall (adjacent to where the engine harness comes over the firewall), a direct bolt in no modifications required.
Kit features:
1. 034Motorsport custom baffled Vortex breather can, this design can is used in aircraft and motorsport applications to remove oil and water vapor from the crank case fumes. As crank case fumes are forced out, they enter the catch can tangentially, through centrifugal force causing heavier oil and water vapor to fling outward and drain down the walls of the can. This is a much more effective way of seperating oil and water vapor than most generic "catch cans"
2. Full draining back to the block so the can never has to be drained, a 034Motorsport oil drain flange mounts between the oil pan and the turbo oil drain line to allow seperated oil to drain back to the sump.
3. Molded reinforced silicone hoses for lifelong use and durability, large diameter hoses ensure restriction free crank case ventilation, catch can features 1" fittings for high flow.
4. full recirculation back into the intake for smog compliance, or can be implimented with an air filter on the catch can outlet to keep any oil fumes out of the intake system.(please state when ordering)
5. All clamps, fittings and hardware required to install the kit in virtually any Mk4 VW 1.8t.
http://www.034motorsport.com/images/Mk4_Catch_Can_Black.jpg

Breather Hose Kit, Mk4 1.8T, Silicone
This complete silicone hose kit is designed to replace all of the crumbling plastic and rubber awfulness that is the factory breather hose system.

Replaces the following factory parts:
* Valve Cover Breather Hose - (06A 103 221BH / 06A 103 221AN)
* Block to Intake Manifold Hose - (06A 103 221BK)
* T-Hose - (06A 103 24)
* Block Breather Tube - (06A 103 213F)
* Valve Cover Breather Tube - (06A 103 213AF)
* PCV Valve (035 103 245A)

Sold as a complete kit, available in black only.
Hose clamps included!

Please specify if your car has an early (-2002) or late (2003+) valve cover breather nipple. Early cars require the 20mm hose, later require the 25mm hose.
http://www.034motorsport.com/images/Mk4_Breather_Hose_Kit.jpg


Install pictures coming soon!
Any questions do not hesitate to ask!

[RobDon]

Does the complete kit include everything shown above - the can and ALL hoses?

[INA]

Does the complete kit include everything shown above - the can and ALL hoses?
The complete breather hose kit is different to the complete catch can kit. If you are interested in BOTH a breather hose and a catch can kit then the total will be 229 USD + 99 - 34.99 + 62 USD shipping = 355.01 USD Rob :D

[RobDon]

If buying both though you wouldn't need the upper 2-way hose in the breather kit right - because there is a longer one in the catch can kit?

[INA]

If buying both though you wouldn't need the upper 2-way hose in the breather kit right - because there is a longer one in the catch can kit?
Yup,
Thats what the subtraction of the 34.99 above was for.

[RobDon]

AH ok! Is the hose back to the intake manifold needed for a catch can setup?

[Mark300zx]

Is the inside of the catch can baffled and does it have a tube for seeing how full it is?

Also does it come as a direct fitment for 225 cupras?

[INA]

AH ok! Is the hose back to the intake manifold needed for a catch can setup?
No, you will put a cap in this scenario or use the 1 way valve.
Is the inside of the catch can baffled and does it have a tube for seeing how full it is?

Also does it come as a direct fitment for 225 cupras?
The catch can currently does not have a tube and it is somewhat baffled. In a couple of months I will be releasing my own catch can kit using these silicone hoses for those who have requested there own kit.

These are a direct fitment for 225 Leon's yes

[RobDon]

Pity you're not making that lower hose without the outlet to the inlet manifold, would be a nice clean install for the catch can setup.

[INA]

Pity you're not making that lower hose without the outlet to the inlet manifold, would be a nice clean install for the catch can setup.
Is putting a cap there too much?

[RobDon]

No, just would be cleaner that's all.

[INA]

No, just would be cleaner that's all.
I know,
Made the product for the most common use - i.e. reroute.

[cupra-neil]

will one of these kits be made for the mk3 ibiza?, looks like a nice upgrade and would be even better in coloured hoses!

[INA]

will one of these kits be made for the mk3 ibiza?, looks like a nice upgrade and would be even better in coloured hoses!
Should work fine in an Ibiza since it is a 1.8T motor as well.

[DaNnY_LaD]

Happy days get to order one soon :D

[RobDon]

So is everything in stock then?

[INA]

So is everything in stock then?
If 034 does not have in stock then I have 10 kits in stock.
No longer selling products we do not have in stock.

[RobDon]

Cool. One final question - is there any advantage to using the one-way valve and hose back to the intake manifold when using a catch can, or is it better just to blank it off?

[cupra-neil]

Any chance of some blue sets being made up?

[INA]

Any chance of some blue sets being made up?
If we do an order for 40 sure but at this time no.
I have been getting alot of requests for green though?
...p.s. HOW ARE YOU DOING? Been a while eh!?

Cool. One final question - is there any advantage to using the one-way valve and hose back to the intake manifold when using a catch can, or is it better just to blank it off?
blank it off. Ill show everyone what we are working on here. I am using the 034 silicone hoses but with our own catch can.
Should be fun once its done.

[RobDon]

Let's see it then! :D

[INA]

Let's see it then! :D

I can email you teasers.

[RobDon]

Go on then - I was about to order a catch can kit from you but let's see what you're working on please.

[INA]

Go on then - I was about to order a catch can kit from you but let's see what you're working on please.
I will sned over some shortly.

[Tom Duff]

Can you do the breather kit without the block to intake manifold hose and one way valve, perhaps with a blank instead?

[INA]

Can you do the breather kit without the block to intake manifold hose and one way valve, perhaps with a blank instead?
I could put a cap on the 1 way valve for those who are interested in 1.

[RobDon]

What size blanking plug is needed for that bottom hose Issam?

[INA]

What size blanking plug is needed for that bottom hose Issam?
If you use the 1 way valve supplied by 034 then you need a 5mm blanking plug.

[cupra-neil]

Shame they cant be done in blue, would have had a set!

[INA]

Shame they cant be done in blue, would have had a set!
You can always use blue tape :cartman:

[Prebs]

Any pics?

Prebs

[INA]

Should have some images up shortly. Been a bit busy over here with the turbo kit

[INA]

Hose kits for the masses!