Short shift? [Archive] - SEAT Cupra.net

LEO LION R

18-03-2004, 11:51

from your link " The Neuspeed short shift kit for the Audi TT Quattro & Golf R32 easily installs on the selector shaft of the transmission located right below your factory airbox and battery. No need to touch any of the parts in your center console! The billet steel shift kit reduces the throw from gear to gear by approximately 35% "

are there two kinds then, a Billet one ( 35%) & a Nuespeed one (50%) ?

I'm confused :confused:

:cheers:

Icecavern

18-03-2004, 12:26

The newspeed shift is made from billet steel I think... I think it's just 35%

LEO LION R

18-03-2004, 12:29

:thumbup: that's what i thought, but had to check in case

:cheers:

awesomeade

18-03-2004, 12:35

sorry - yes me going mad!

Icecavern

18-03-2004, 12:50

Do we get an SCN discount on these? :D GO on... sell me my first R mod cheep :D

Pete

LEO LION R

18-03-2004, 13:21

Yeah go on, i've already spent a small fortune so funds are low :)

awesomeade is great :clap: :thumbup:

:cheers:

Jon@VAGWORX

19-03-2004, 13:09

Group buy discount ;)

awesomeade

22-03-2004, 11:06

I can do 10% on these as per normal SCN discount....

If you want a GB, well - i have 8 of these in stock i mistakenly ordered :)

If we can get an order for 5 together, i'll do them for £115 +VAT+Post (144.52 total)

LEO LION R

22-03-2004, 12:00

Excellent deal - I'll defo have one if it defo fits the LCR 6 speed gearbox, only 4 to go then.

Come on guys get in quick.

:cheers:

Icecavern

22-03-2004, 12:12

me as well...

3 more to go :D

Jon@VAGWORX

22-03-2004, 13:41

Me too :)

Two to go ;)

LEO LION R

22-03-2004, 14:47

Come on guys it's first come first served, Syphon, Z, max, dangel and co - you know you want it really. :D [B)]

:cheers:

Syphon

22-03-2004, 16:28

Come on guys it's first come first served, Syphon, Z, max, dangel and co - you know you want it really. :D [B)]

:cheers:

ere ere - what's all this then?

How easy are these to fit?

Scott

Icecavern

22-03-2004, 16:43

Shouldn't be too hard. The only hassle is you'll have to remove the airbox and maybe the battery to change it.

Pete

tom.everett

22-03-2004, 16:51

I'm in... Better be as easy as you say!!... hehehe

Email me the details..

Thanks.

LEO LION R

22-03-2004, 20:17

:cheers: :cheers: Details are as follows (and posted above);

If we can get an order for 5 together, awesomeade will do them for £115 +VAT+Post (144.52 total)

So the first 5 with the names on here get one for that price, so far it looks like all places taken for this first time offer, maybe if there are another 5 people wanting them then awesome ade will do the same again ?

LEO LION R
ICE MAN
J-R
tom.everett
Syphon? on first dibs for the last one

awesomeade can you please confirm how you wish us to deal with this particular discount, shall we each call you - maybe you could PM each of us and we'll take it from there.

:cheers:

P.S. any reserves in case someone changes their mind, or in case another 5 person discount is made avaiable ?

Syphon

22-03-2004, 22:23

Soz guys. Gonna have to give this one a miss for now. Been an expensive month with the wifey's b'day and all.

Maybe the next group buy if there is one. :)

:cheers:

Scott

Icecavern

23-03-2004, 07:05

Someone else buy one.... dangle you don't have one of these yet... ;)

Pete

LEO LION R

23-03-2004, 07:11

I thought Z might want one too ?

:thumbup:

Feel

23-03-2004, 08:37

Really tempted.

Any technical difference between this one and the Diesel Geek one? The Neuspeed one looks weighted.

Does anyone know if it reduces the throw/travel in both axes, i.e. accross the gates as well as through them?

LEO LION R

23-03-2004, 09:04

Good question, i had presumed that it did, it may only be in the forwards/backwards direction. :confused:

Is anyon eable to confirm this ?

:cheers:

awesomeade

23-03-2004, 11:05

just forwards and backwards..

Icecavern

23-03-2004, 11:17

Come on... We need one more buyer!!!

Feel

23-03-2004, 11:27

Come on... We need one more buyer!!!

Nope, I'm not in (going to sort out clutch travel first), sorry guys

LEO LION R

23-03-2004, 13:47

Anyone else want one, its a great price and will sort out the long range of the 6 speed box.

Right guys and gals, the deal is give awesomeade a call on 0161 776 2222 (between 9am-4pm) and place your order, remember to mention your SCN name and he can tick you off the list. He can take your payment over the phone (easiest) or online and ignore the price online as he will correct it if you identify yourself from on here.

If you have any queries about this deal, either PM me or PM/call awesomeade.

As always you can expect a quick delivery from Awesome, so you can even have it fitted by the weekend :D

:cheers:

Icecavern

23-03-2004, 14:23

I assume his name is Ade? I'll feel like a right pr*ck asking for awesomeade :lol:

Pete

Saul

23-03-2004, 14:43

hehe

yer its ade

:D

LEO LION R

23-03-2004, 15:51

SOryy LOL yes it is:roflmao: , i had to make the assumption myself when i called him earlier.

:cheers:

Icecavern

23-03-2004, 17:38

Will call in the morning... Ade don't sell mine now... ;)

Shame it'll be ages before I get to fit it... Busy this weekend, then the weekend after the car is having the Clifford fitted, so it'll be the weekend before Donny then :D

LEO LION R

23-03-2004, 20:03

Right it looks an absolute doddle to remove and refit, all except for one little chap.

It appears there is a non standard fitting on one of the two parts to be released, how is this part in the photo released ?

:cheers:

stpete

23-03-2004, 20:20

Bit like a circlip, only lift centre and slide! May go PING so use all three hands!!!

stpete

23-03-2004, 20:25

One quick Q how much without postage? I live in cheshire and can collect!

LEO LION R

24-03-2004, 07:27

Bit like a circlip, only lift centre and slide! May go PING so use all three hands!!!

Excellent, thanks. Was a bit worried it was another 'dealer only' item special tool to remove it.

Will the rod attached to it / gearstick be under any sort of tension, ie. will there be any pressure on the part being removed that has to be held onto while swapping parts over ?

Thanks in advance.

:cheers:

stpete One quick Q how much without postage? I live in cheshire and can collect!

The normal price i imagine £145+vat, best if you speak to awesomeade directly 0161 776 2222 (between 9am-4pm)

LEO LION R

24-03-2004, 10:09

It's okay, aparently not. I've got the instructions and part now. :D

Looks really easy to do.

:cheers:

Jon@VAGWORX

24-03-2004, 12:47

Ordered mine ;)

That clip looks a little awkward, think i will let someone trial it first :D

tom.everett

24-03-2004, 18:31

Ordered mine today too.

Thanks.

tom.everett

25-03-2004, 12:34

Delivered today, fitted in about two mins!

What a difference, very nice.

Thanks for the deal. :)

Jon@VAGWORX

25-03-2004, 12:44

Delivered today, fitted in about two mins!

What a difference, very nice.

Thanks for the deal. :)

Damn you don't hang around :-o

Did you take any pics???

How does that silly clip come off then???

Do you need to take out the airbox???

Just recieved mine yay :)

LEO LION R

25-03-2004, 12:54

darn it, too slow again.

i left mine at work alst night so never got it fitted yesterday :redface:

As well as the above questions was there any probelm in getting the teeth lined up with the original part alignment ?

:cheers:

awesomeade

25-03-2004, 14:19

Hi stpete

Can do it without for £135 (if you go in quote ade - cupranet group buy)

awesomeade

25-03-2004, 14:20

Your the last one STpete so GB closed for others now

tom.everett

25-03-2004, 14:25

tom.everett

25-03-2004, 14:26

May re-do it with pictures, if the weather is good this week end!??!

Icecavern

25-03-2004, 14:50

Ade does that mean I've missed out or do you still have mine?

Pete

LEO LION R

25-03-2004, 15:03

Didn't take pictures, didn't remove any thing!..

Just undid the bolt, pulled of the clip with my fingers and gave it a gentle clip with a hammer. just came straight off!.. Easy.
Push on the new one, lining up the nick, and repace the bolt and clip. Such an easy thing.

And I still cant get over the difference!

Thanks again.

Yeah but how did you know exactly which angle it went on again, and what about greasing the new part where it slide into the other part ?

ICEMAN; I hope yours hasn't gone, afterall you started the thread !

:cheers:

Jon@VAGWORX

25-03-2004, 15:14

.Didn't take pictures, didn't remove any thing!..

Just undid the bolt, pulled of the clip with my fingers and gave it a gentle clip with a hammer. just came straight off!.. Easy.
Push on the new one, lining up the nick, and repace the bolt and clip. Such an easy thing.

And I still cant get over the difference!

Thanks again.

Cool, will give it a go tonight ;)

ICEMAN; I hope yours hasn't gone, afterall you started the thread !.

Lol, yeah good point :D :thumbup:

LEO LION R

25-03-2004, 18:35

Didn't take pictures, didn't remove any thing!..

Just undid the bolt, pulled of the clip with my fingers and gave it a gentle clip with a hammer. just came straight off!.. Easy.
Push on the new one, lining up the nick, and repace the bolt and clip. Such an easy thing.

And I still cant get over the difference!

Thanks again.

Snazzin frazzin razzin fecker, i got the clips off no probs, didn't even remove the airbox or anything else, the problem came when i had the clips off and nut off, but the damn cam wouldn't lift of because of the centre splin slot.

So the old one stays on tonight, untill i take some brave pills to get the hammer in use.

So tomorrow it is then, going to go and watch celtic get tanned by barcelona 3-1

:cheers:

RobDon

26-03-2004, 09:01

I just found this thread - missed out on the GB then? I assume this fits the Cupra 6-speed too then?

tom.everett

26-03-2004, 09:16

Yeah but how did you know exactly which angle it went on again, and what about greasing the new part where it slide into the other part ?

There is a nick on the spindle, so it only goes on correctly!...
There was quite a bit of grease already on the parts it sides through.

LEO LION R

26-03-2004, 09:55

Cool, problem was getting the old one off the spindle last night. Will try again tonight though, get the big hammer out this time ;) :D

Robdon, yeah its finished aparently, unless you can find some more peeps to get another one set up ? (not sure if it fits the 6 speed cupra box, i would have thought it would as its only the ratios that are slightly different as are the R32 from LCR)

:cheers:

Jon@VAGWORX

26-03-2004, 12:20

slim_boy_fat

26-03-2004, 12:26

Fitted mine last night :D

Took me all of five minutes :p

Leo,

Put the nut back on the top of the bolt a few threads and tap this with the extension bar ;)

Can't believe how easy it was and how much diference it makes [B)]

Top mod guys :cheers:

5mins :roflmao: i should take about 30sec including taking it out the box and test driving your car after fitting ;)

LEO LION R

26-03-2004, 12:34

5mins :roflmao: i should take about 30sec including taking it out the box and test driving your car after fitting ;)

Like you'd know cos you've fitted how many short shifts ?

Put the nut back on the top of the bolt a few threads and tap this with the extension bar

Cool, thanks for the top tip, wasn't brave enough to use a hammer and it was getting dark - didn't want to leave the car undrivable for the morning ;) :D

:cheers:

stpete

26-03-2004, 14:35

gonna try and collect on Sat but if there aint one left for Iceman give him mine and I'll get summat else to make me Smile (APR trial)!!!!!

LEO LION R

26-03-2004, 18:47

WOW WHAT A DIFFERENCE, It should be like this as standard, feels more like 50% reduction at least. Same movement forwards and backweards as a STi7/8 box.

:cheers:

v-g

26-03-2004, 20:04

I just found this thread - missed out on the GB then? I assume this fits the Cupra 6-speed too then?
Did u get any answer to the Cupra 6-speed question? I can't see one... :confused:
A explanatory one, that is...

RobDon

27-03-2004, 12:42

WOW WHAT A DIFFERENCE, It should be like this as standard, feels more like 50% reduction at least. Same movement forwards and backweards as a STi7/8 box.

:cheers:

So it's worth getting then? The 6-speed box in the Cupra and R are the same box aren't they?

LEO LION R

27-03-2004, 17:50

I am pretty sure the ratios are slightly different, but it should make no difference to the fitting of it, yes imho it should be like this to start with. Nice and short / tight between all gears, and in fact because the throw is so much shorter the side movement is shorter too.

win win situation.

:cheers:

RobDon

27-03-2004, 18:28

Cool - I'll get one then, although I've missed the GB price haven't I?

v-g

27-03-2004, 18:44

Cool - I'll get one then, although I've missed the GB price haven't I?
RobDon: can u post some experience once u have it installed? Appreciate it :happy:

RobDon

27-03-2004, 18:46

Yeah - I've just ordered one so we'll see what happens, even if I don't get the GB price it'll still be worth having.

Could someone who has just fitted one post a pic of the Neuspeed one in place please? Cheers.

LEO LION R

29-03-2004, 07:30

Could someone who has just fitted one post a pic of the Neuspeed one in place please? Cheers.

Here you go, fresh from this morning :thumbup:

Still getting used to it, 4th feels like it is the shortest of all.

:cheers:

RobDon

29-03-2004, 08:27

Cool - so it's really easy to change then?

LEO LION R

29-03-2004, 08:45

Cool - so it's really easy to change then?

Apart from the removal of existing which i wasn't brave enough to hit the first time it is a doddle, the end clips are a little tricky in case you drop them into the engine compartment.

Allow for 10 minutes to do it properly, ie clean out old grease with metal particles in the slide mechanism to the right in that pic, and re grrease.

Good luck and enjoy.

Yes it really is that easy. :D :thumbup:

:cheers:

RobDon

29-03-2004, 08:48

Nice one! Hope Awesome send mine out quickly this week then!

LEO LION R

29-03-2004, 09:21

Nice one! Hope Awesome send mine out quickly this week then!

You should get it the next day from the order being placed, they ar every fast.

:cheers:

RobDon

29-03-2004, 14:55

Awesome are cool - not only have they done me the GB price despite it being closed now - it was despatched today!!! :D

LEO LION R

29-03-2004, 15:05

Awesome are cool, more like Awesome are Awesome :D

Fast and efficient, they know a good service means good publicity and more sales.

Top job by ade :thumbup:

RobDon

29-03-2004, 17:31

I just checked my online invoice - I have been charged full price not the GB price - I must have mis-interpreted what Ade said to me - oh well! :( Not so awesome after all.

fickel

29-03-2004, 19:37

Neuspeed..nice looking bit of kit and from all the +ve posts a good bit of kit :clap:

But is it just me but it looks like the original could be modified to do the same thing. I will investigate this one night this week.

Christ I'm such a cheapskate £150 for a bit of metal :-o

LEO LION R

29-03-2004, 20:07

RobDon - nae luck :(
fickel - good luck :blink:

:cheers:

P.S. don't see how it can be modded unless you have serious welding or machinery skills, which i don't and probably many others dont

RobDon

29-03-2004, 21:12

I believe the Audi TT shortshifter is an OEM part, ECS sell them for $35 (around £20):

http://www.ecstuning.com/stage/edpd/pagebuild_v2.cgi?make=Volkswagen&engine=1.8T&model=Golf%20IV&submodel=&category=Drivetrain&subcategory=Short%20Shifters

http://www.ecstuning.com/stage/images/product/iadmin/1466_x450.jpg

Icecavern

30-03-2004, 07:37

The TT one won't fit, it's different.

Pete

LEO LION R

30-03-2004, 07:54

The TT one won't fit, it's different.

Pete

I wouldn't be so hasty, comparing the befor eand after pics with that TT one, it looks like it might do the job, albeit the weighted end is on the opposite side, but there is nothing in the engine bay there to block its movement, so it really just comes down to the angles and lengths - which look very very similar. Youd really need confirmation from them that it fits or at least try it and return it.

Damn could have maybe saved £120, then again even if it fits it might not feel right or be badly balanced ?

:cheers:

LEO LION R

30-03-2004, 08:02

In fact having looked at the site again, there is every possibility that it fits no probs - it just doesnt shorten the throw by as much. Only 20% as opposed to 35% from the Neuspeed one.

Still not bad for the money though, depends how much shorter you want it.

:cheers:

slim_boy_fat

30-03-2004, 08:03

I just checked my online invoice - I have been charged full price not the GB price - I must have mis-interpreted what Ade said to me - oh well! :( Not so awesome after all.

So that will be sort of Awesome, or almost awesome, nearly awesome. Might just have been a mistck, why not give them a call to clarify...Then see if they are truly awesome.

awesomeade

30-03-2004, 08:29

Hi Rob, The online invoice doesnt take into account the GB price since the GB was over... so dont worry ive made sure you got it at the GB price :)

RobDon

30-03-2004, 08:30

So you are AWESOME after all - cheers, top job - me happy!

ECS sell the TT shifter for Golf 1.8T - so it must fit!

slim_boy_fat

30-03-2004, 08:32

See above Rob ;)

RobDon

30-03-2004, 08:32

Saw it - me's happy again! :thumbup:

awesomeade

30-03-2004, 08:44

Ok all out of stock of these now, seems some leon boys turned up at the weekend and bought them all :)

LEO LION R

30-03-2004, 08:45

I think he meant see above : TT shifts.jpg

:cheers:

RobDon

30-03-2004, 09:21

Neuspeed shifter just arrived, very fast service, GB price too - nice one! I just need my car back now ... waiting on custom remap for K04 at Star, hope to have it back by Friday.

LEO LION R

30-03-2004, 09:43

Neuspeed shifter just arrived, very fast service, GB price too - nice one! I just need my car back now ... waiting on custom remap for K04 at Star, hope to have it back by Friday.

Told you they were awesome :D :clap:

Get on the blower to jim to speed it up, be good to see it shown off on the sunday meet if possible

:cheers:

RobDon

30-03-2004, 09:46

He said I'll have my car by Friday - he was working with APR until 10:30PM last night!

LEO LION R

30-03-2004, 09:55

LOL

Thats because they dont start till 3pm our time :D

slim_boy_fat

30-03-2004, 10:09

I am going to be heading over to Jims in the near future, get a few runs on the rollers and do some fine tuning.

Icecavern

30-03-2004, 11:12

So you've sold mine then? :redcard:

Oh and the TT one doesn't fit, I tried one...

Pete

awesomeade

30-03-2004, 11:17

Ive got one saved here for Ice man and one for Stpete... then no more for the time being

Icecavern

30-03-2004, 13:33

Thank god for that :D

I'll give you a call as soon as I get chance, probably tomorrow now, it's too noisy in here to make calls...

awesomeade

30-03-2004, 13:51

We're closed tomorrow so best try the day after :)

Icecavern

30-03-2004, 13:56

If I put the order online is it possible to add a comment for you?

Or I could PM/mail my details to you?

Pete

awesomeade

30-03-2004, 14:23

Yes you can do it online, i enter them all into our system anyway

Icecavern

30-03-2004, 14:27

You have PM ;)

Pete

fickel

30-03-2004, 19:46

Well in response to earlier post about modding the original.................
I removed the original and the only issue about the modification would be the removal of the original 'cable post'. It looks like some form of compressed fitting.
There is ample space on the original casting to move the post in and probably further than the Neuspeed item but then the change would be unusably short.
I am taking my motor over to my Uncles engineering firm tomorrow to get his views(He specialises with Rolls Royce turbines Hmmm BIG TURBO on a trailer and flexy turbo pipes :D :D )
My early opinion would be to engineer a new post and drill tap the oem casting.
I suspect he would knock me out as many as I wanted free gratis for those on here wanting /capable of drill/tapping.
I also had a close look at the (side to side)bracket which is made out of pressed steel. There isn't the space on the part to move the post closer to the box and therefore reduce side to side movement unless a short piece of plate is rivetted/welded on and the post mounted on this. There is plenty of room to do it.
I shall report back closer to the weekend

Look what marriage and children have reduced me to doing

LEO LION R

30-03-2004, 20:15

Like i said before, good luck.

Don't fancy yer chances boring out the cast metal and it still being strong enough when the gear linkage pulls or pushes hard on it.

:cheers:

stpete

30-03-2004, 22:20

Hi Ade, picked mine up Sat and got the bushes for dog bone! Also Jim did me the APR trial all I can say is wow, then I killed it by disconnectin battery after only 3 hrs of play!!! Damn stereo!!!!! I WILL BE BACK!!!!!

Fl@pper

30-03-2004, 22:23

LEO LION R

31-03-2004, 07:25

if its closer then technically there will actually be less stress on the bar but more on the change itself

be a good challenge :p eh scott ? :p

wouldnt mind a pic or 2 if you get some - see how it works out

Technically there will be the same stress on the bar because its still the same length, the distance to the centre pivot has shortened and therefore the same force being applied will result in more stress on the new joint as its having to deal with the same force over a mush shorter movement. :thumbup:

Icecavern

31-03-2004, 08:23

So I can't fit this wrong then? And this clip comes off easy?

Sounds good, can't wait now :D

Icecavern

02-04-2004, 16:43

How did Awesome ship this to people? Was it by APC?

Got a card from APC Overnight but they're not answering the phone to arrange a pickup... Looks like bracknell which is a fair trek :(

Pete

LEO LION R

02-04-2004, 18:37

Think it was, not 100% sure though. Got mine sent to the work address, cos i knew i'd be out.

Fitting is a doddle, don't even have to remove the airbox or battery as it suggests.

:cheers:

Icecavern

04-04-2004, 06:03

Well once the couriers answered the phone so I could go get it, very happy now... Took me a bit longer than you guys cause I'm not mechanical and I couldn't get the standard one off :redface:

It's got to be a 50% reduction. It also seems to reduce forward throw more than backwards but I think that's just cause I'm not used to it yet.

Very nice though :D

LEO LION R

04-04-2004, 07:15

Yeah i had problems the first time i tried to remove the existing one, just got to do what is said above.

I'm also still getting used to it, although it does feel more natural now just over a week on, and getting better ever trip.

Slotting 4th gear back is the shortest i think, so maybe it's ever so slightly different from one car to the other, as you think forwards is shorter ?

:cheers:

RobDon

05-04-2004, 15:12

The Neuspeed shortshift does indeed fit the Cupra as well as the R, what a difference - feels very short and sporty!

LEO LION R

05-04-2004, 17:23

does this mean that you do in fact have your blue beast back on the road today ?

RobDon

05-04-2004, 18:38

It does yes! Final figures are 255BHP and 269lbft of torque - I'm happy! :thumbup:

LEO LION R

05-04-2004, 21:12

LOL that's what i had the last time i was there straight after the Milltek and before TIP. I'll find out what v-tune can do very soon :D

Bet your really enjoying that car now, get the DV sorted (back on maybe ?)

:cheers:

LEO LION R

10-04-2004, 18:19

It does yes! Final figures are 255BHP and 269lbft of torque - I'm happy! :thumbup:

Yeah i'm happy too, although could be happier - no v-tune to play with yesterday :( , maybe next trip in a few weeks.

Mine has 205bhp @ wheels as well (256bhp) and 276lbft @ 4300rpm (over 255lbft from 3000-5500rpm). Peaking at 1.25bar on the rollers and 1.385bar on the road, which surprised me at just how much more it was on the road.

ECU Explorer what a wonderful tool and getting even more advanced soon too.

:cheers:

slim_boy_fat

10-04-2004, 20:50

Yeah i'm happy too, although could be happier - no v-tune to play with yesterday :( , maybe next trip in a few weeks.

Mine has 205bhp @ wheels as well (256bhp) and 276lbft @ 4300rpm (over 255lbft from 3000-5500rpm). Peaking at 1.25bar on the rollers and 1.385bar on the road, which surprised me at just how much more it was on the road.

ECU Explorer what a wonderful tool and getting even more advanced soon too.

:cheers:

Oi wheres ma CD?

LEO LION R

23-04-2004, 08:29

doesn't really matter, with new wastegate :thumbup:

v-g

12-05-2004, 13:00

The Neuspeed shortshift does indeed fit the Cupra as well as the R, what a difference - feels very short and sporty!
Which one, this one?
link (http://www.neuspeed.com/products/product_details.asp?app=29|G4&type=3&ltype=ns_euro&p_id=460)
another link (http://www.awesome-gti.co.uk/catalog/product_info.php?manufacturers_id=19&products_id=939)
Or not, 'cos yours is newer than mine (2000 mod)

Ibiza Evo 2

01-06-2004, 16:51

Does anybody know if a simular short shift excists for the ibiza 1.8T :confused: .
I'm looking for this for quite a while but still haven't found one :(

edc

01-06-2004, 16:54

02j change IIRC, which can also be used on 02a, you'll have to check B&M or Neuspeed catalogues to see if they do one for those.

Edit: this is listed for 99+ Cupra BM-E45114

Ibiza Evo 2

01-06-2004, 17:36

02j change IIRC, which can also be used on 02a, you'll have to check B&M or Neuspeed catalogues to see if they do one for those.

Edit: this is listed for 99+ Cupra BM-E45114

Is this for the ibiza cupra or Leon cupra??? Because I think they are different :blink:

edc

01-06-2004, 18:16

Ibiza, that's what you were asking for!!

Ibiza Evo 2

02-06-2004, 05:16

Ibiza, that's what you were asking for!!

Yes,indeed.But are you sure that one fits to a ibiza because that one is for a golf IV. I've already compared the original partnumbers of the one in a golf IV 1.8T and the one in the ibiza 1.8T and they are both different :confused:

Thx

edc

02-06-2004, 08:25

It was listed for Ibiza, any more info then you'll have to get in touch direct i suppose.

Ibiza Evo 2

02-06-2004, 09:52

Ok,thx edc :thumbup:

vern

02-06-2004, 16:44

Leo i'm getting one of these on the LCR when go for the V3 update so they better be good man... :D
vern

LEO LION R

03-06-2004, 07:03

Leo i'm getting one of these on the LCR when go for the V3 update so they better be good man... :D
vern

LOL It is totally subjective man, i think you will enjoy it but can't be 100% sure of that now can i ? ;)

:cheers:

P.S. What about the dog bone mount bushes ?

vern

03-06-2004, 07:27

LOL It is totally subjective man, i think you will enjoy it but can't be 100% sure of that now can i ? ;)

:cheers:

P.S. What about the dog bone mount bushes ?
Answered like a true politician leo :bleh: ;) lol

yeah was reading up on these on the audi boys site while 1 am this morning,general consensus is that they work really well,with a slight increase in vibriation through the wheel + bulkhead,this settles after one/two days of pasty,then just a tad @ idle etc,good mod for the money,as they say gear changes improve also,and a few also have the shortshift and say the combination is a revelation :idea: :thumbup:

vern

LEO LION R

03-06-2004, 11:21

and a few also have the shortshift and say the combination is a revelation :idea: :thumbup:

vern

it is a revelation :thumbup:

50% shorter roughly and the sportier in car rumble from the DBM bushes is great, however i would disagree that they settle after a few days, mine is just the same. Maybe the ones that settle need tightening upo again - especially if they fitted it themselves without the use of a vice to press the parts in properly ?

:cheers: