IE 2.5L 20V I5 new product and new release thread

[sales@IE]

This thread will serve as the IE 2.5L I5 product library that we continuously update with our new releases. This will make it easy for you guys to find what you are looking for and we wont be making new threads for every new product on this fast growing platform. Also, if anyone has any questions, comments, or suggestions please post them in here. We offer a huge inventory for VW/Audi and other makes including internals, valve train, fueling solutions, hardware, OEM parts, billet accessories, turbos, and much more. Not everything will make it into this thread, so if you dont see what you are looking for check www.intengineering.com or e-mail sales@intengineering.com

http://i1229.photobucket.com/albums/ee469/intengmedia/IMG_7882.jpg

[sales@IE]

Valve Train
http://i1229.photobucket.com/albums/ee469/intengmedia/IMG_7887.jpg
IE offers a huge selection of valve train parts for your 2.5L to help your 5 cylinder motor breath and rev harder.

Ferrea Intake Valves
http://i1229.photobucket.com/albums/ee469/intengmedia/IMG_7902.jpg
Ferrea make's some of the finest quality valvetrain available and is trusted by the top racing teams around the world making them perfect for your 2.5L I5 project!
Complete sets of 10 available in standard size Order here (http://www.intengineering.com/Ferrea-Intake-Valve-Set-p9578401-1-2.html)
or
Complete set of 10 available in +1MM oversized Order here (http://www.intengineering.com/Ferrea-Intake-Valve-Set-p9578402-1-2.html)

Ferrea Super Alloy Exhaust Valves
http://i1229.photobucket.com/albums/ee469/intengmedia/IMG_7903.jpg
Ferrea's Super Alloy valves are made from an extremely heat resistant alloy, that is specifically designed for forced induction and nitrous applications.
Complete sets of 10 available in standard size Order here (http://www.intengineering.com/Ferrea-Exhaust-Valve-p9578403-1-2.html)
or
Complete sets of ten available in +1MM oversized Order here (http://www.intengineering.com/Ferrea-Exhaust-Valve-p9578425-1-2.html)

Ferrea Valve Spring and Retainer Kit
http://i1229.photobucket.com/albums/ee469/intengmedia/IMG_7891.jpg
Heavy duty valve springs will prevent valve float at higher rpm. Titanium retainers will help keep the weight down, while providing extra strength. Valve springs and retainers are a MUST for high revving engines!
Sold as a complete set of high performance valve springs, and titanium retainers. Order here (http://www.intengineering.com/Ferrea-Valve-SpringRetainer-p9580534-1-2.html)

Integrated Engineering Valve Guides
http://i1229.photobucket.com/albums/ee469/intengmedia/IMG_7909.jpg
It is always a great idea to replace your valve guides when doing a cylinder head build. These valve guides are made in house on our CNC lathe, using a proprietary bronze alloy. This alloy allows for 10% faster heat transfer, as well as better wear characteristics to make for a longer life. We have designed these with an aerodynamic tip design to cut down on airflow restrictions in the port. These valve guides are made with ultra high concentricity for exact valve placement, with precisely sized outer diameters. Standard 2.5L 20V I5 Sized. Sold individually (20 required for MK5 2.5L 5 cylinder engines) Order here

[sales@IE]

Bottom End
http://i1229.photobucket.com/albums/ee469/intengmedia/IMG_7925.jpg
IE offers everything you need to build a strong short block. Everything for all motor or all out forced induction builds, we have what you need with much more coming!

Integrated Engineering H-Beam Connecting Rods
http://i1229.photobucket.com/albums/ee469/intengmedia/IMG_intengineering.jpg
Integrated Engineering is proud to manufacture the highest quality connecting rods available for European applications, at a reasonable price. This is accomplished through careful design, manufacturing, and quality control processes. With hundreds and hundreds of sets of VW and Audi connecting rods in stock, we are your specialist supplier with the inventory and knowledge to make your project a success. Sold standard with ARP2000 bolts. Order here (http://www.intengineering.com/Integrated-Engineering-p8917384-1-2.html)

JE Pistons
http://i1229.photobucket.com/albums/ee469/intengmedia/IMG_7906.jpg
JE pistons are a great upgrade for someone looking to build a stout, reliable engine. They have 20mm wrist pins so they will require a set of rods with 20mm pins to match. They feature JE's 2618 alloy which is stronger then most other pistons made from 4032, and are specifically engineered for extreme applications. Custom pistons and coatings available to order.
JE 83MM Bore 8.5:1 CR 92.8mm stroke Orde here (http://www.intengineering.com/JE-83MM-Bore-25L-5CYL-p7954946-1-2.html)
JE 83MM Bore 11:1 CR 92.8mm stroke Order here (http://www.intengineering.com/JE-83MM-Bore-25L-5CYL-p9457125-1-2.html)

SPA T3 Turbo Manifold
http://i1229.photobucket.com/albums/ee469/intengmedia/IMG_7916.jpg
This is a high quality SPA Turbo cast iron turbo manifold, these are cast in their own foundry, and thoroughly tested in real world driving conditions. It features a T3 flange, so it can be used with a T3 or T3/T4 turbo. It also has a 2-bolt wastegate flange, for use with 38MM wastegates. Order here (http://www.intengineering.com/SPA-Turbo-25-5-Cylinder-p9407840-1-2.html)

[sales@IE]

Billet Accessories
http://i1229.photobucket.com/albums/ee469/intengmedia/IMG_7927.jpg
Integrated Engineerings billet accessories for your I5 engine are designed, machined, and tested in house. Designed with meticulous detail and machined from the highest quality materials you are ensured to have a exact fit and beautiful finish.

SAI Blockoff Plate Kit
http://i1229.photobucket.com/albums/ee469/intengmedia/IMG_7930.jpg
These plates allow the removal of the entire secondary air injection/combi valve system, including the large injection pump on the front of the engine. This results in a much cleaner looking engine bay and less clutter. CNC machined 6061 aluminum alloy, and designed to accept an O ring seal, complete with our aerospace grade Viton O ring, and stainless steel bolts. Order here (http://www.intengineering.com/IE-25l-5-Cylinder-SAI-p9407849-1-2.html)

External Oil Cooler Adapter Plate Kit
http://i1229.photobucket.com/albums/ee469/intengmedia/IMG_7924.jpg
This kit will allow you to remove your factory oil cooler and replace it with a more efficient external oil cooler. These are a direct fit onto the OEM oil filter housing using the included stainless steel mounting bolts. These billet adapter plates are made in house from 6061 aluminum, and completed with a red anodized finish. The inlet/outlet holes on the plate are tapped for -8an o-ring boss fittings. Take care of your oil temps today with this quality piece! Order here (http://www.intengineering.com/Integrated-Engineering-p9551637-1-2.html)

Billet Fuel Rail
http://i1229.photobucket.com/albums/ee469/intengmedia/IMG_7928.jpg
These are made in house from a solid piece of 6061 aircraft aluminum, to provide a beautiful, high flowing piece. These rails have mount tabs that use factory screws to attach to your intake manifold. These feature -8an O-ring boss ports, which will be enough flow for even the most wild setups. There is no need to worry about injectors coming out either, as these rails retain the factory injector clips for added safety. The clips install at the same angle as the factory fuel rail, to maintain the factory injector angle. Available in IE red or aluminum raw finish Order here (http://www.intengineering.com/Integrated-Engineering-p9756961-1-2.html)

Billet Fuel Rail Install Kit
http://i1229.photobucket.com/albums/ee469/intengmedia/IMG_7336.jpg
These are assembled in house for a perfect fit and shipped as a complete install solution when using our billet fuel rail. This kit features everything needed to install, including stainless steel braided fuel line wrapped in nylon so it wont chew through any engine components, -08AN boss O-ring to -6 rail fitting, -08AN O-ring plug, two 90 degree -6AN fittings, and a -6AN adapter fitting . The fuel line comes pre-assembled for easy install, and features a easy press on fitting to install onto the stock fuel line so you don't have to cut or modify the factory fuel system in any way. Order here (http://www.intengineering.com/Integrated-Engineering-p9759224-1-2.html)

Billet Cam Locking Tool
http://i1229.photobucket.com/albums/ee469/intengmedia/IMG_7934.jpg
This tool holds the cams at TDC while you work on the engine, so there is no possibility for timing errors. Made in house on our CNC mill from 6061 aluminum and finished in IE Red anodize. Order here (http://www.intengineering.com/Integrated-Engineering-p9578407.html)

[sales@IE]

Hardware and misc
http://i1229.photobucket.com/albums/ee469/intengmedia/hardware.jpg
We have a massive selection of bolts, washers, nuts, etc.. for both your 2.5L and universal applications. Not everything will make its way into here so check www.intengineering.com for a full list of parts.

ARP head stud kit
http://i1229.photobucket.com/albums/ee469/intengmedia/IMG_7911.jpg
This is absolutely the highest quality head stud kit you can find. We are genuine ARP Distributors so buying from us guarantees you a valid warantee. This will ensure your head does not lift even under the most extreme boost conditions and is completely reusable, great for race engines. Order here (http://www.intengineering.com/ARP-MK5-25L-Head-Stud-p8876954.html)

Integrated Engineering EKagrip 6 Bolt Flywheel Friction Disk
http://i1229.photobucket.com/albums/ee469/intengmedia/IMG_7297.jpg
Originally designed for low horsepower, the 6 bolt flywheel interface struggles when subjected to serious power, this interface can become taxed and allow the flywheel to slip around under high torque. This leads to wear between the surfaces, and shortly thereafter complete failure of the bolts and joint. This ruins the flywheel and crankshaft, and can even damage the transmission bell housing. In order to fight this we had EKagrip make some of their patented nickel and diamond coated friction shims. These shims increase the friction between the two components by up to 3 times what is seen with regular steel on steel contact. This greatly increases the load which can be carried. The shims are .008" thick, and do not cause any alignment problems with the clutch / flywheel. Order here (http://www.intengineering.com/Integrated-Engineering-p9762598.html)

[sales@IE]

IE engineWear Enthusiast Apparel
http://i1229.photobucket.com/albums/ee469/intengmedia/enginewearforumbanner.jpg
Integrated Engineering is proud to announce the release of our line of enthusiast apparel "engineWear". We will be adding many more T-shirts, hoodies, hats, keychains, etc.. in the future!

Boost In Session 2.5L 20V I5 T-shirt
http://i1229.photobucket.com/albums/ee469/intengmedia/spoolinsessionforum_3.jpg
Our very first engineWear high quality printed T-shirt has you 2.5L 5 cylinder owners in mind with a boosted 2.5L graphic under our "Spool is in session" catch phrase. This shirt is guaranteed to show off your love for the 2.5L platform and show off it's potential! Order here. (http://www.intengineering.com/EngineWear-25L-5-Cylinder-p9762770-1-2.html)

2.5L I5 Keychain
http://i1229.photobucket.com/albums/ee469/intengmedia/25keychain.jpg
Show off your love for the 2.5L I5 with the engineWear stainless steel headgasket keychain! Order here. (http://www.intengineering.com/EngineWear-25L-Inline-p9749418-1-2.html)