PDA

View Full Version : Remote central locking


SharanTDICarat
04-12-2004, 21:51
I am looking for help in how to recalibrate my central looking remote on my Sharan . I know its not an Alhambra but they are nearly the same .
Thanks
TAM

Fl@pper
05-12-2004, 13:02
afaik its the same as ibiza 2 - wot year is the car?

remote re-program instructions (http://www.seatcupra.net/forums/showpost.php?p=87434&postcount=3)

try that if it's pre 01

SharanTDICarat
05-12-2004, 22:19
afaik its the same as ibiza 2 - wot year is the car?



It is a 1998

TAM

SharanTDICarat
05-12-2004, 22:40
Right just tried that got the flashing led on the remote and the best I got was it would lock with the remote so I tried it again and it seems to have gone back to not working again, may be try new batteries in the remote

Fl@pper
05-12-2004, 23:33
sounds like it worx ok - just low signal

batteries be the key so to speak ;)

SharanTDICarat
17-12-2004, 20:40
Well tried a new battery, tried recalibrating the key fob as discribed but still no joy . Any ideas????
Thanks
TAM

fredt
27-12-2004, 00:34
Insert a key into the driver's door lock and turn the key to the UNLOCK position three times in succession, for at least 0,5 seconds each time, and within a total period of five seconds.

The system should now enter the programming mode and the LED should illuminate continuously for the next 15 seconds. The first key must be programmed within this period.

Aim the first key to the programmed at the infrared receiver.

Press one of the buttons on the key and keep it pressed while simultaneously pressing the second button three times. Release both buttons.

The remote control key should acknowledge as successful transmittal by the KEY LED flashing five times. The system should similarly acknowledge by the indicator LED flashing rapidly six times.

Note:
Programming of the first key must be completed within 15 seconds from the start of the LED illuminating continuously. The programming of the second or subsequent keys must be completed within 15 seconds from the start of the flashing acknowledgement.

The system will automatically exit the programming mode 15 seconds after the last key has been programmed.

SharanTDICarat
29-12-2004, 19:54
Aim the first key to the programmed at the infrared receiver.

.


Where is the IR receiver, any ideas!!!

TAM

Fl@pper
29-12-2004, 20:00
above the mirror

fredt
30-12-2004, 00:38
and possibly above the rear hatch? the range on the IR remotes is crap :censored: your best bet is to add on either an alarm that has remote locking or an after market remote locking kit as sold by www.CandRenterprises.co.uk a few people on the Galaxy web site you have posted on have fitted these and are pleased with the results
CLIP441534 Sharan >98, Seat Alhambra >98
The M320 S Kit Includes:
1 hand remote
1 key fob remote
1 universal installation kit.
For simpler installation order a "Plug n' Play" wiring kit for your particular car.

Remote Plug In Upgrades
These plug in modules are available to upgrade the later type factory central locking systems to remote control. The advantages of the M20:-
Fixed code
1 Key cover remote