Open Filters (JR-Jetex + Green)

[ibizacupra]

Ok then..
some options to think about.

Open Induction (noiser than enclosed kits)
**prices Exclude vat and Carriage**
*** Silicon Joiners/Couplers are available in Blue/Black as std........ Red are special order and +£more

*NEW**NEW**NEW**NEW**NEW**NEW*
JR Blue Jetex Cones:
80mm neck - £45
Optional to push filter nearer inner wing:
80mm silicon coupler - £5.09
80mm Alloy Coupler - £7.71
hose clips - £1.82/each
Heatshield - £29
For Ibiza, Optional 70mm-80mm straight reducing 45' elbow option so you can use the larger FR08001 filter - £17.95
Leon180 owners, Optional 70mm-80mm straight reducer option so you can use the larger FR08001 filter - £13.95


*NEW**NEW**NEW**NEW**NEW**NEW*
JR Blue Jetex Cones:
70mm Neck - £38.30
Optional to push filter nearer inner wing:
70mm silicon 45 degree elbow - £14.40
70mm silicon straight coupler - £4.28
70mm alloy coupler - £6.94
hose clips - £1.82/each


Green PowerFlow Cones:
70mm MAF (150/180 1.8T)
cone OD 120mm x cap OD 120mm x 200mm long, 30 degree entry- TA6.70-£76.96
cone OD 120mm x cap OD 120mm x 180mm long, 30 degree entry- TA8.70-£79.31

Conical PowerFlow Cones:
what I ran myself previously...
cone base OD 140mm x cap OD 120mm x 200mm long, centre entry- CB2.70-£76.96 (good for 352bhp)

Cylindrical Cone Filters:
same as previously supplied to some AM guys for their CAI.
75mm MAF: cone OD 140mm x 150mm long, rubber end cap, centre fed- B6.75-£45.77 (334bhp rated)
75mm MAF: cone OD 180mm x 150mm long, rubber end cap, centre fed- B9.75-£53.99 (429bhp rated)

Conical Cone with stud mounting (for bracket support for example)
75mm MAF: cone top OD 180mm x cone bottom OD 100mm x 200mm long, centre fed, stainless endcap with stud- K7.75v - £52.95


Prices subject to vat and carriage



LOTS of choices.. :)

[techie]

Im looking for an induction kit for my Pick up.

1.6 MPi, I will measure the intake pipe and get back to you Bill.

Ross

[BMcN]

Wish you had just posted one Bill, now I am spoiled for choise. What size MAF is on the Ibiza?

Presume these just connect directly to the MAF? Would it be worth me getting a small bit of SS pipe made to router it a bit closer to the hole in the wing? Presume these would all just give a very deep growl and a small DV noise? What are they like for heatsoak where they sit?

You on MSN mate as I could do with discussing these with you: bmcn85@hotmail.com if you are.

[Dormouse]

More cones than the M25! :D

Dor.

[BMcN]

Looking at your pictures thats a nice one you used to have on! Where did you get the heatsheild though? And how did it sound when your car was as close to standard as possible? At a guess I'd say a LOT noisier than Dynatwist growl wise but less noise DV wise?

Bryan.

[techie]

Bill,

It would appear my dimensions are a little weedy when compared to a 1.8T, is there anything you have listed for my 'modest' intake ;)

http://memimage.cardomain.net/member_images/11/web/611000-611999/611313_66_full.jpg

Cheers

Ross

[Feel]

While we're doing innuendoes - your airbox appears to be "ribbed for pleasure"

[ibizacupra]

Wish you had just posted one Bill, now I am spoiled for choise. What size MAF is on the Ibiza?

Presume these just connect directly to the MAF? Would it be worth me getting a small bit of SS pipe made to router it a bit closer to the hole in the wing? Presume these would all just give a very deep growl and a small DV noise? What are they like for heatsoak where they sit?

You on MSN mate as I could do with discussing these with you: bmcn85@hotmail.com if you are.

Ibiza MAF is 70mm OD.
Green also list straight length of rubber hose in 300mm length, which combined with a small steel connector ring, could be used to extend the filter further from the MAF, nearer the inner wing.. remembering the overall length of the cone has to be allowed for.. (depending on what takes your fancy)
Closer to the wing is better than not, but will also say, open airfilters in a 20VT engine bay WILL allow hot air to be breathed in.. They will sound louder, wooshing on DV, growling on low rpms etc, BUT the downside is hot-warm air, particularly in the summer.

regards
bill

[ibizacupra]

Bill,

It would appear my dimensions are a little weedy when compared to a 1.8T, is there anything you have listed for my 'modest' intake ;)

http://memimage.cardomain.net/member_images/11/web/611000-611999/611313_66_full.jpg

Cheers

Ross

There are listed 65mm ones which should clamp down to suit..
for example:
Power Twin Cone-65mm entry, 120mm OD, 150mm long-TA1.65-£55.50
or
Conical Powercone-65mm entry, 140mm OD x 120mm OD x 130mm long-AC1.65-£57.99
or
Rubber end cone-65mm entry, 100mm OD x 150mm long-25 degree entry-B9.65BC-£50.95
or
Cylindrical Cone-65mm entry, 100mm OD x 150mm long-B3.65-£31.99

and there's loads more.... but I have to stop somewhere... :)

Prices plus vat & carriage but subject to SCN discounts

[BMcN]

How did the one you have on perform heat soak wise? Is that a heat sheild that you had on and where was it from?

Do you think it would be ok in the summer if it was mounted as close to the wing as possible with a heatsheild and piping feeding cold air up like it does with the Dyna.

[ibizacupra]

How did the one you have on perform heat soak wise? Is that a heat sheild that you had on and where was it from?

Do you think it would be ok in the summer if it was mounted as close to the wing as possible with a heatsheild and piping feeding cold air up like it does with the Dyna.

My old one (which was a Green PowerCone twin cone jobbie) as reusing Jabba's metal shield which I modded for improved MAF mouting (less vibration). I replaced the then Jabba filter which was a stainless steel gauze type. - not a type I personally like due to questionable dust filtration, so I changed for as big a twin cone as I could fit in their heatshield. There was a small feed pipe into the section which was a legacy of my old Hurricane filter-80mm flexi. It did'nt breath engine bay air like this. I cant say I experienced heat soak (but how could you tell) aswith >300bhp the odd bhp potentially lost are not missed.

If you want to make something, just shield the engine side, use the battery as a part shield also and bung in a cone filter.. The air from the inner wing will be readily available to be drawn in. (make sure the factory intake hose is removed of course to make room)
regards
bill

[CupraR-Rog]

Having been running an open cone for about 9 months now, I can say that the hot air issue IS an issue, but not as much of one as you may think...

OK, town driving, or if you've been stationary for a while, especially in the summer you will notice that you are drawing in hot air. Having said that though, once out on the open road, such is the airflow through the engine compartment that it isn't really an issue.

For best results, a heatshield is needed along with a cold air feed... A&M were meant to be on the ball with this but their Ibiza kits have taken the priority.

At the end of the day, whacking in an open cone filter is a cheaper option than the likes of the Dynatwist etc, and seeing as you get what you pay for, there are some drawbacks to it.

However, the bit of induction growl you get is good, the turbo noice is louder (sounds like a bigger turbo!), and the sound of an atmos dv (not loud though, but you can hear it!) are the winning points...

[BMcN]

Don't suppose you still have the heatsheild lying about do you Bill? ;)

I am liking the idea of ope filter and heatsheild. Dont know anyone near me that could manufacture me one. No companies sell them?

[Freerider]

Really interested in doing this as a temporary measure as i have a spare filter. Is there ne other connections like Vac pipes that need mouniting into the air intake??

Bill any idea if green will make a CAI?? Or do they have additional piping availible seperatley to create one :)

[ibizacupra]

Don't suppose you still have the heatsheild lying about do you Bill? ;)

I am liking the idea of ope filter and heatsheild. Dont know anyone near me that could manufacture me one. No companies sell them?


As it happens I do have my old one yes. BUT it was for IHI so not sure if std ibiza pipework would reach it. Extension piece of pipe kinda thing probably req'd. It wont be that loud tho..

Jabba sell em, but you know that.

[ibizacupra]

Really interested in doing this as a temporary measure as i have a spare filter. Is there ne other connections like Vac pipes that need mouniting into the air intake??

Bill any idea if green will make a CAI?? Or do they have additional piping availible seperatley to create one :)

aux air pump needs a filtered air supply. (ibiza/Leon 20VT)
Green wont be doing an ibiza one no, but they will be doing a Golf/Leon one (not R) shortly in March they said.

The Green CAI is Dynatwist for ibiza, or RamAir, or Twister type assembly of kit from me. (RamAir and Twister being the louder of the above mentioned choice)

regards
bill

[BMcN]

As it happens I do have my old one yes. BUT it was for IHI so not sure if std ibiza pipework would reach it. Extension piece of pipe kinda thing probably req'd. It wont be that loud tho..

Jabba sell em, but you know that.


Why would it not be that loud? How much louder is an open filter going to be compared to a Ramair one?

[Scotty_b]

may be no good but i have a heatshield and induction kit off my Leon R in the for sal esection, not sure if its fits tho (well i know it doesnt what i mean is can you mod it)

[ibizacupra]

Why would it not be that loud? How much louder is an open filter going to be compared to a Ramair one?

Just telling you how it was.. thats all
Jans Lupo is much snortier than my ibiza. :clap:

[BMcN]

So tell me this, what differs a simple open induction kit to a CAI? Is it just that CAI have no chance of drawing in cold air?

Trying to decide between a open kit with a custom heatsheild and cold air feed from the wing and a RAMAIR. What will be noisier?

[ibizacupra]

So tell me this, what differs a simple open induction kit to a CAI? Is it just that CAI have no chance of drawing in cold air?

Trying to decide between a open kit with a custom heatsheild and cold air feed from the wing and a RAMAIR. What will be noisier?


No the opposite.. CAI which stands for Cold Air Induction does have air going to it, with Twister/Dynatwist/RamAirMaxflow type products having a physical duct feeding air into it and are enclosed.

Plain cone filters are just that.. plain and cones.
Wafting a cold air feed pipe near it and calling it a CAI is commonly done, but also laughable.

If you want to judge noise, remove your dynatwists shield cover, and viola you have a plain cone.

I am struggling to know quite what you are after... noise, open filter, closed CAI filter or what.... :confused: :confused:

[BMcN]

No the opposite.. CAI which stands for Cold Air Induction does have air going to it, with Twister/Dynatwist/RamAirMaxflow type products having a physical duct feeding air into it and are enclosed.

Plain cone filters are just that.. plain and cones.
Wafting a cold air feed pipe near it and calling it a CAI is commonly done, but also laughable.

If you want to judge noise, remove your dynatwists shield cover, and viola you have a plain cone.

I am struggling to know quite what you are after... noise, open filter, closed CAI filter or what.... :confused: :confused:


Sorry I meant to say no chance of drawing in hot air, not cold. Just my lack of typing skills.

Basically I am looking for as much growl noise as possible, maybe DV but not as important. That is basically it, don't care about performance increase but do not want a decrease due to sucking in hot air! So I guess my breif is simply; as much noise as possible with no adverse effects on performance or MAF.

[T7ODD]

Just stick with the Dynatwist mate.
I temporarily took my cold air feed piping off the Dynatwist and although it's a lot noisier inside the car, it's quieter outside the car. I've put it back on now. You wont get much induction growl out of the 20VT engine, it's a quiet, smooth engine. If you want induction roar then you should buy a Honda VTEC :-o
Talking about dump valve noise, people round here seem to be running with open filters with dump valve chatter. It must be their original Bosch valves, noisey but broken :confused:

[BMcN]

Just stick with the Dynatwist mate.
I temporarily took my cold air feed piping off the Dynatwist and although it's a lot noisier inside the car, it's quieter outside the car. I've put it back on now. You wont get much induction growl out of the 20VT engine, it's a quiet, smooth engine. If you want induction roar then you should buy a Honda VTEC :-o
Talking about dump valve noise, people round here seem to be running with open filters with dump valve chatter. It must be their original Bosch valves, noisey but broken :confused:


I'd buy a VTEC if I could afford it. If Dyna is as noisey as it gets then I would put my standard filter back on as the noise is hardly any different.

You are correct it is a quite smooth engine but that means nothing - most of the noise comes from sucking air in and spitting it back out. Take you exhaust off and bet you won't call it quiet.

[T7ODD]

I sold my Civic VTi to buy the Ibiza. The induction noise and lack of DV sound was disappointing but get a good exhaust system and you'll be smiling ;)

[ibizacupra]

well I'm confused.. :confused:

You have the soundclips...
have you taken off the Dynatwist housing to try that noise out?
It does'nt get louder than that..
More noise from DV venting when chipped (which the Lupo is)

:hide:

[BMcN]

well I'm confused.. :confused:

You have the soundclips...
have you taken off the Dynatwist housing to try that noise out?
It does'nt get louder than that..
More noise from DV venting when chipped (which the Lupo is)

:hide:


Yeah mate I have heard the clips but its very very difficult to judge on a video.

Got the cover off the dyna, going a run later. Looks like the best bet will probably be the ramair still. Did you get my email about the Ramair and the cleaning of it?

[Martin CUK]

I'm lookin to buy an induction kit as I'm pickin up my new Cupra on Sat.

What would people suggest I buy? Hopefully be gettin more performance mods in the future too. :) Like BMcN, I'd like the best performance & noise. :D

[ibizacupra]

Yeah mate I have heard the clips but its very very difficult to judge on a video.

Got the cover off the dyna, going a run later. Looks like the best bet will probably be the ramair still. Did you get my email about the Ramair and the cleaning of it?

I did, and RamAir should be available from me early March.
Smaller Twister filter unit is louder than XL one for some reason, and RamAir one is similar size to Twister.
So far as I know the kit included cleaner/recoating spray in the RamAir kit... but TBC as I have'nt got my hands on the kit yet.

[ibizacupra]

I'm lookin to buy an induction kit as I'm pickin up my new Cupra on Sat.

What would people suggest I buy? Hopefully be gettin more performance mods in the future too. :) Like BMcN, I'd like the best performance & noise. :D


What model car? cupra what? ibiza, leon? R?

[Martin CUK]

Sorry, should of stated.

It's a 2001 Ibiza Cupra.

Should I get Hurricane, Dynatwist, or wait for the Ramair Bill?

Cheers.

[BMcN]

Took the cover off the Dyna and made bugger all difference. Think it needs cleaned but still....

Looks like Ramair will be my best bet although I don't think I will be happy with any options avalible at the moment.

[Martin CUK]

Does yours sound like this mate....?

http://www.seatcupra.net/video/hurr/P7160012.MOV

[ibizacupra]

Sorry, should of stated.

It's a 2001 Ibiza Cupra.

Should I get Hurricane, Dynatwist, or wait for the Ramair Bill?

Cheers.

If all you want is noise, then Twister or RamAir when available.
Twister is available now, and RamAir early March.

Twister is £140 same as FR one, RamAir will be £120 approx

choice choices

[ibizacupra]

Does yours sound like this mate....?

http://www.seatcupra.net/video/hurr/P7160012.MOV

Thats the Hurricane (former name) which is Twister (smaller Twister as opposed an XL Twister which is what in a Dynatwist kit for 20VT Ibiza as std)

Smaller one seems louder but I know not why. :confused:

[Martin CUK]

Cheers Bill. :D

Just want noise for now, as I'm gonna save up for other mods (FMIC, K03S, DP, CAT, Remap etc) to get in one go, so just want to put a smile on my face for now. :D lol

Do you think the Ramair will perform better than the small Twister (Hurricane)?

(Last question I promise!)

[ibizacupra]

no I doubt there's any difference between them.

[CupraR-Rog]

Unfortunately, for those of you who want induction noise, the turbo makes an excellent silencer of the induction, by making the air drawn into the engine a constant stream (hence the "whistle" noise), rather than the 'normal' induction "growl" (caused by the pulses of air caused by the pistons drawing the air in...)

[JimmyCupra]

Conical Cone with stud mounting (for bracket support for example)
75mm MAF: cone top OD 180mm x cone bottom OD 100mm x 200mm long, centre fed, stainless endcap with stud- K7.75v - £52.95

What BHP is this filter rated to?

Cheers

[ibizacupra]

Conical Cone with stud mounting (for bracket support for example)
75mm MAF: cone top OD 180mm x cone bottom OD 100mm x 200mm long, centre fed, stainless endcap with stud- K7.75v - £52.95

What BHP is this filter rated to?

Cheers


Listed @ 400bhp
:cheers:

[IbizaCupra20VT]

Hi Bill, I'm looking for a

Green PowerFlow Cones:
70mm MAF (150/180 1.8T)
cone OD 120mm x cap OD 120mm x 200mm long, 30 degree entry- TA6.70-£65.50

Whats the best way to send payment, etc. Cheers

[ibizacupra]

bell me with card details address etc
I am on 07976 800775 mon-fri

regards
bill

[The MoffMeister]

bill as for earlier i need one to fit an 80mm maf but i see largest is 75mm so will i need a step up sleeve?

dont suppose you have pics as an example?

[ibizacupra]

bill as for earlier i need one to fit an 80mm maf but i see largest is 75mm so will i need a step up sleeve?

dont suppose you have pics as an example?

I've not got pix no.. maybe some on www.greenfilters.co.uk
other sizes available... check your actual MAF diameter. the 75mm ones will flex larger easy as pie.. rubber necked

[The MoffMeister]

ok will check and get back to you cheers

[Marcus D]

Hi,

What induction kit would do you recomment for a 2005 MK4 Ibiza Cupra 1.8T????

Many Thanks,

Marcus.

[ibizacupra]

panel filter.. - £36

[RichieRich]

hi there bill, dont know if u recieved my text earlyer today but is there any chance u could order me up a green filter for my golf please? [P646531] i think is the one! its a 2000 golf 4 pd115 cheers! ill even have cash for ya ;)

[ibizacupra]

i carry these in stoc - £43 plus delivery
regards

[Whitechapel]

Hi, what advantages would there be to getting this for my STD ibiza?

http://www.greenfilters.co.uk/m59/SEAT/p200846/SEAT_IBIZA_4_1,4L_i_16V_100hp_%2802%3E%29_-_Single_Cone_Induction_Kit/product_info.html

Cheers

[RichieRich]

cheers bill, if its okies ill pop over next sat and give you cash? unless u want to be there till about 6 one evening this week? cheers! :) im guessing your post code still goes to your house? (i might be able to remember were to go from there tho!)

[ibizacupra]

Hi, what advantages would there be to getting this for my STD ibiza?

http://www.greenfilters.co.uk/m59/SEAT/p200846/SEAT_IBIZA_4_1,4L_i_16V_100hp_%2802%3E%29_-_Single_Cone_Induction_Kit/product_info.html

Cheers

you would get a little more noise and some small airflow increase, but dont expect wow type gains for any airfilter.
regards
bill

[ibizacupra]

cheers bill, if its okies ill pop over next sat and give you cash? unless u want to be there till about 6 one evening this week? cheers! :) im guessing your post code still goes to your house? (i might be able to remember were to go from there tho!)

Workshop postcode is GL10 2DG. thats where I will be

2 roundabouts off Junction 13 M5.
if you get to a 3rd roundabout you have gone too far

regards

[RichieRich]

cheers bill :)

[Mcpickering]

Hi, im looking for an induction kit for a golf GTI 1.8t (150bhp) im afraid im new to this and have no idea what i need, help anyone?
thanks.

[RichieRich]

Hi, im looking for an induction kit for a golf GTI 1.8t (150bhp) im afraid im new to this and have no idea what i need, help anyone?
thanks.

hi there i think this thread "might" be helpful for you http://uk-mkivs.net/forums/p/144856/980096.aspx#980096 just depends what kind of induction kit u want

[ibizacupra]

Hi, im looking for an induction kit for a golf GTI 1.8t (150bhp) im afraid im new to this and have no idea what i need, help anyone?
thanks.

open induction? - £54 for an open cone
panel filter? - £43 for a panel filter
enclosed induction? - £170 for a dynatwist


Are you looking for sound or performance or both?

[Mcpickering]

open induction? - £54 for an open cone
panel filter? - £43 for a panel filter
enclosed induction? - £170 for a dynatwist


Are you looking for sound or performance or both?


Im really looking for a mix, also cost is another factor though, which is best for what? and do they come with fittings(are they hard to fit)

Thanks

[ibizacupra]

my advise is panel filter, and enlarge intake to airbox with an 80mm flexi feed pipe.
for noise, open cone wins, or even louder something like Carbonio which is a relocation pipe + cone filter on the end, moves filter to lower in the front wing(downside of which is puddles/floods are a potential engine killa)

www.greenfilters.co.uk has options for you to browse over.
these are what I generally supply

70mm neck size you are looking for btw

[Mcpickering]

my advise is panel filter, and enlarge intake to airbox with an 80mm flexi feed pipe.
for noise, open cone wins, or even louder something like Carbonio which is a relocation pipe + cone filter on the end, moves filter to lower in the front wing(downside of which is puddles/floods are a potential engine killa)

www.greenfilters.co.uk has options for you to browse over.
these are what I generally supply

70mm neck size you are looking for btw

Ok well I like the sound of that. It will be good for performance and ok for the noise?
Do you have all the parts I would need? How much? Are they a pain to fit?

Thanks

[ibizacupra]

Ok well I like the sound of that. It will be good for performance and ok for the noise?
Do you have all the parts I would need? How much? Are they a pain to fit?

Thanks

I would order the parts in to order, when you have decided what option you would like to go for. fitment is DIY

regards

[Mcpickering]

ok brilliant, well i like the sound of the option you were saying, the panel filter and larger bits?
sorry i have no idea, but i have a friend who works for audi/VW that will help me fit.

is that the best idea for performance and a little bit of sound?

[ibizacupra]

panel filter is £43, 80mm flexi pipe is £19.99/1mtr and you will need to modify your airbox to accomodate the larger flexi and route it to a cold air feed location down by the bumper etc

[Nimshoi1]

Hi Bill

I've got mk3 Seat ibiza Cupra 2002 and currently running BMC induction kit with cat back scorpion exhaust and Jabba custom chip. All very nice but no whoooshing noise!! :(
I think an open cone to replace BMC might provide a little more music to the ears :lol:
What can you recommend in this area?

Also, standard Bosch DV might be up for replacemnt shortly, stick with recirc or try a turbosmart dualport?

Cheers

Rob

[ibizacupra]

one of these takes your fancy?
http://www.seatcupra.net/forums/showthread.php?t=51394

open cone will give you the woosh.. stick with a recirc dv imho

[cupramillo]

Hi Bill, what was the price of the Jetex filter you had left? Think it needs to be
80mm 200mm for the ko3hybrid fitment as its connection to the 3' MAF housing

Can i have a price for the same sized Green Cotton Filter aswell?

Thanks

Camillo

[ibizacupra]

Hi Bill, what was the price of the Jetex filter you had left? Think it needs to be
80mm 200mm for the ko3hybrid fitment as its connection to the 3' MAF housing

Can i have a price for the same sized Green Cotton Filter aswell?

Thanks

Camillo

The 80mm neck JR one is not that long its 175Dx140Dx172L - £46
same as this one
http://badger-5.com/bin/liam-polo/polo-jr-2.jpg

A single cone 200mm long green filters one is £58
or twin cone 200mm long version is £88
twin powercone below
http://badger-5.com/bin/liam-polo/polo1-5.jpg

I have one of each in stock currently

[cupramillo]

Which one do you recommend or are they really the same sort of thing? I assume they are rated to enough bhp for a ko3hybrid?

thanks

[cupramillo]

Hi Bill,

could i order that Jetex 80mm 200mm filter from you please? My paypal is down at the moment, would it be best to ring you and place the order over the phone?

Thanks

Camillo

[cupramillo]

Bill can you hold the last Jetex air filter for me please. I'll be ringing you this week to order it from you as my paypal is still off line:(

Is the above Jetex filter bhp rated enough for a ko3hybrid setup?

Thanks

[ibizacupra]

Bill can you hold the last Jetex air filter for me please. I'll be ringing you this week to order it from you as my paypal is still off line:(

Is the above Jetex filter bhp rated enough for a ko3hybrid setup?

Thanks

you are confusing the 200mm of the green with the jetex, which is 170mm long

[cupramillo]

I was only interested in the Jetex air filter. Just wanted to know if it is bhp rated to handle ko3hybrid and will fit onto the 3'maf

hope this helps

[ibizacupra]

its >300bhp rated... but its not 200mm long as you describe it

[cupramillo]

Ok, i just need a jetex that will work and fit for this setup. Is your jetex in stock suitable? Also my battery is in its normal place so it cant be too big

thanks

[ibizacupra]

you want a filter with higher bhp rating and have minimal space
the jr filter is 175mm base diameter x 140mm top diameter and 172mm long if you want to check what space you have available

[Jonny95 SXE]

Hi bill, I have a green filter in my yoke at the moment but am wondering where would I get a part number from for it to get a price off you. its BIG.

75 input. 250 long?

[ibizacupra]

Hi bill, I have a green filter in my yoke at the moment but am wondering where would I get a part number from for it to get a price off you. its BIG.

75 input. 250 long?

www.greenfilters.co.uk and browse the dimensions would be a good start

[ibizacupra]

bump
New Prices and offerings

Ok then..
some options to think about.

Open Induction (noiser than enclosed kits)

*NEW**NEW**NEW**NEW**NEW**NEW*
JR Blue Jetex Cones:
80mm neck - £44.26
70mm Neck - £38.30

Green PowerFlow Cones:
70mm MAF (150/180 1.8T)
cone OD 120mm x cap OD 120mm x 200mm long, 30 degree entry- TA6.70-£76.96
cone OD 120mm x cap OD 120mm x 180mm long, 30 degree entry- TA8.70-£79.31

Conical PowerFlow Cones:
what I ran myself previously...
cone base OD 140mm x cap OD 120mm x 200mm long, centre entry- CB2.70-£76.96 (good for 352bhp)

Cylindrical Cone Filters:
same as previously supplied to some AM guys for their CAI.
75mm MAF: cone OD 140mm x 150mm long, rubber end cap, centre fed- B6.75-£45.77 (334bhp rated)
75mm MAF: cone OD 180mm x 150mm long, rubber end cap, centre fed- B9.75-£53.99 (429bhp rated)

Conical Cone with stud mounting (for bracket support for example)
75mm MAF: cone top OD 180mm x cone bottom OD 100mm x 200mm long, centre fed, stainless endcap with stud- K7.75v - £52.95


Prices subject to vat and carriage

[Stoker20VT]

Hi could i have a price for a Jetex filter for my standard MK3 Ibiza Cupra with everything needed to fit it straight on if thats possible please?

How do i pay? Paypal?

[ibizacupra]

70mm MAF size Filter is £38.30
45' silicon coupler is £16.00
70mm coupler £7.71
2 x hi-grip clamps - £1.17 each
+vat
Delivery £9.50

However I believe some people fit the filter to the MAF housing direct

regards

[Stoker20VT]

sounds good to me, silicone in blue please.

how do i pay? Paypal? Phone?

[Stoker20VT]

Just placed my order via Phone. Look forward to recieving, thanks!

[caney]

hi bill,which filter would you recommend for low 400's?mated to a rs4 maf.
cheers

[1ncubu5]

Hey Bill, any word when the 70mm Jetex cones will be in stock?


Cheers

[ibizacupra]

spoke with them just now.. looking like beginning of next week to me, they've not arrive with Jetex yet but due this week
I will confirm when they come back to me
regards
bill

[h7 cya]

Hello, could you give me a price on a green cotton cylindrical filter 180mm/200mm with silicone coupler to the maf for a LCR.
Thanks.

[ibizacupra]

Hello, could you give me a price on a green cotton cylindrical filter 180mm/200mm with silicone coupler to the maf for a LCR.
Thanks.

the filter will go direct onto the MAF unless you wanted to space it out, in whihc case you would also need a stub alloy joiner also. Most fit filter onto MAF directly.

some Green options:
Single Cone Filter (Conical) - 80mm Inlet Dia, 200mm High K2.80 £59.65
Single Cone Filter (Conical) - 80mm Inlet Dia, 200mm High K4.80V £63.24
Single Cone Filter (Conical) - 80mm Inlet Dia, 200mm High K4.80 £59.65
Single Cone Filter (Cylindrical) - 80mm Inlet Dia, 200mm High B4.80 £59.65
Single Cone Filter (Cylindrical) - 80mm Inlet Dia, 200mm High B2.80 £59.65
Twin Cone Filter (Conical) - 80mm Inlet Dia, 200mm High K4.80BC £87.27
Powerflow Filter - Silver (Conical) - 80mm Inlet Dia, 200mm High CA1.80 £90.82

RRP listed off which I can discount 10%
prices are plus vat & delivery & subject to being in stock @ Green

K2.80 I have one in stock here

JR's 80mm Filter is:
175mmx 140mmx 172mmx CENTERx 410bhpx RUBBERx FR-08001= £48+vat

regards
bill

[h7 cya]

Thank you for your help, i will have a closer look at the options available.

[ibizacupra]

hi bill,which filter would you recommend for low 400's?mated to a rs4 maf.
cheers

how much space you got in the TT steve?
90mm on your RS4 MAF housing? (I need to check my old one on the shelf for diameter when I'm down the unit later tonight to confirm)

JR dont list anything big enough

Green list a few if you have enough space along these lines perhaps
Powerflow Filter - Silver (Conical) - 90mm Inlet Dia, 250mm High CA3.90 £100.45
Single Cone Filter (Conical) - 90mm Inlet Dia, 230mm High K60.90 £56.79

[Madmile]

What filter Bill to replace Jabbas old filter (Like for Like) in there IHI kit?.

[ibizacupra]

FR08001 i think same as lcr boys use - £52

[westallc]

i need a new filter want it big as it goes in the bumper of the vrs going onto a 3inch abd pipe

which one do i need thankyou

clive

[ibizacupra]

FR08001 will fit

[Stoker20VT]

could you send me a reciept to lee_s11@hotmail.co.uk please?

new to this site and donnt like paying over the phone :s

Thanks.

[ibizacupra]

send you a receipt? comes with the goods fella

[Stoker20VT]

aw right no problem, how much for a Forge 007p with any pipes and clips needed to fit? Thanks.

[D.K]

What filter would you recomend for a stage 1 LCR running 270bhp Bill ?
I would prefer a filter thats not bright green or blue

[ibizacupra]

aw right no problem, how much for a Forge 007p with any pipes and clips needed to fit? Thanks.

£82 for dv, comes with clips you need
+postage if sent seperately
regards
bill

[ibizacupra]

What filter would you recomend for a stage 1 LCR running 270bhp Bill ?
I would prefer a filter thats not bright green or blue

lol, you are s**t out of luck then.. colours of green, blue or red cover green filters, JR filters and K&N

panel filter in an airbox with suitable large cold air feed to it will work well and conceal the colour ;)

Apexi filters are a white i think, but not something i deal with currently.

Panel filter no good for you?

http://www.jetex.co.uk/website/images/catalogues/filters/colourangledyellowlarge.jpg

http://www.jetex.co.uk/website/images/catalogues/filters/colourangledredlarge.jpg

http://www.jetex.co.uk/website/images/catalogues/filters/colourangledblue.jpg

the above to show some other colours jetex offer, however these are rated to 250bhp only so are so big

[D.K]

Thanks Bill
I'm already useing a PiperX panel in a modded airbox with a 3" feed pipe.
We've loged it flowing 208Gs.
Just thought I'd try something different to see if I can get anymore.

[Mylo]

you just love the noise mine makes in the tunnels :D

[ibizacupra]

be interesting to compare an large open cone to what you have.. you already have good airflow @ 208g/s

[D.K]

Bill
Which of these has the biggest surface area ?

Twin Cone Filter (Conical) - 80mm Inlet Dia, 200mm High K4.80BC £87.27

JR FR08001
80mm Filter is 175mmx 140mmx 172mmx CENTERx 410bhpx RUBBERx FR-08001= £48+vat

Is there such a thing as too big an airfilter ?

[ibizacupra]

Bill
Which of these has the biggest surface area ?

Twin Cone Filter (Conical) - 80mm Inlet Dia, 200mm High K4.80BC £87.27

JR FR08001
80mm Filter is 175mmx 140mmx 172mmx CENTERx 410bhpx RUBBERx FR-08001= £48+vat

Is there such a thing as too big an airfilter ?
base Dia x top dia x length
140mm x 120mm x 200mm is K8.80BC
175mm x 140mm x 172mm is JR-08001

too big is one which does'nt physically fit..

[Stoker20VT]

hi Bill, i rang and ordered a Jetex filter and hoses the other day.

If it hassnt been posted already could i also have 4 metres 3mm (internal) vacuum hose (blue) and a couple of T's please.

Still have my card details? If not i'll ring tomorrow.

Thanks.

[ibizacupra]

hi Bill, i rang and ordered a Jetex filter and hoses the other day.

If it hassnt been posted already could i also have 4 metres 3mm (internal) vacuum hose (blue) and a couple of T's please.

Still have my card details? If not i'll ring tomorrow.

Thanks.
hi, not shipped yet no, still waiting on jetex delivery backorder to land :shrug:
i'll sort the hoses and T's no probs and add to the order.. i have the previous details here
regards
bill

[1ncubu5]

Hi Bill,

Any word on the back order arriving yet?


Cheers

[ibizacupra]

all back ordered filter orders left yesterday from me.. and should arrive today/tomorrow

regards
bill

[Danny_B]

Back in stock now Bill?

I'm after the biggest 70mm (mk3 Ibiza cupra) Mines a little small and possibly restrictive.

What part no and price am i looking at.

Thanks in advanced.

[ibizacupra]

oh yes. i have a pile of them stacked here
£48 for 70mm version plus delivery
regards
bill

[Ibiza125]

Is the FC-08001 the biggest 80mm Jetex filter on the market? How much would you be all in (carriage and VAT)?

[westallc]

can you supply some jubilee clips need 2 for the fro8001 think its just over 3 inch's

thanks

clive

[TubbyTwo]

Hi Bill,

are the Jetex 80mm neck - £44.26 in stock please?

Cheers

Si

[Ibiza125]

Will be phoning tomorrow for a Jetex FC-08001 Bill ;) Hope you have one in stock as I will be needing it for mid-week :)

[ibizacupra]

rings tuesday fella.. i am racing at castle combe bank holiday monday ;)

[Ibiza125]

rings tuesday fella.. i am racing at castle combe bank holiday monday ;)

Oh yeah! Should have put 2 and 2 together there!

[stef cupra]

hiya ibizacupra. just after a bit of advise, just swapped from a carbonio induction kit, to a k and n apollo. the car feels like its down on power with the k and n so in your opinion am i better off going back to the carbonio, or switch to a jetex open cone with air feed, heat shield etc, in a performance way. the cars a mk1 leon cupra 180. thanks alot

[TubbyTwo]

may have to place an order shortly :)

[markgb]

How can I order a Jetex 80mm open cone filter? Can't see on them on the website.
Cheers,

Mark.

[Wolvotim]

Hi Bill

I have a completely standard 2003 Leon Cupra (AUQ). I am thinking about going for a stage 1 map and from what I’ve seen to take full advantage of the map replacing the air filter and DV are a must.

Could you give me a total price on a jetex cone, forge 007p and all the relevant clips pipes and couplers.

Also would I need a breather filter??

[ibizacupra]

Hi Bill

I have a completely standard 2003 Leon Cupra (AUQ). I am thinking about going for a stage 1 map and from what I’ve seen to take full advantage of the map replacing the air filter and DV are a must.

Could you give me a total price on a jetex cone, forge 007p and all the relevant clips pipes and couplers.

Also would I need a breather filter??

JR filter - £52
DV - £82
breather filter - £4.95
delivery - £9.50

£148.45

regards
bill

[Prebs]

Hi Bill. When logging my k03s (revo stg2 B9 T9 bought from you + all other goodies fmic, tip, miltek) I only managed to ger 159 g/s with the dynatwist (cleaned not long ago). When I removed the shield form the dynatwist I managed 169.88 g/s witch I think is a bit low compared to others with same spec.

Would you say that a jetex fould free up more air than the dynatwist without the shield or could I see a faulty maf?

Prebs

[ibizacupra]

Xl dynatwist with cover off would flow no less than the JR's imho

169g/s is ball park but low end of K03s, so yea, MAF is possible under reading and failing slowly

[TubbyTwo]

Bill, do you have any of the Jetex LCR cones in stock? 80mm neck - £44.26

and do you take paypal?

Cheers

Si

[tills7]

Hi bill, any recomendations for what induction kit I should go for '07 (56 plate) mk4 Ibiza cupra 1.8T

[ibizacupra]

Bill, do you have any of the Jetex LCR cones in stock? 80mm neck - £44.26

and do you take paypal?

Cheers

Si

they will be with me tomorrow
175mm
100mm
172mm
CENTER
410
CHROME
FC-08001
£52.85

Delivery is £7

[ibizacupra]

Hi bill, any recomendations for what induction kit I should go for '07 (56 plate) mk4 Ibiza cupra 1.8T

not much space in these engine bays.. a JR cone will flow well, and fit there, but you would benefit from trying to duct a cold air feed to it also.
JR cone for 70mm MAF is £43

[tills7]

not much space in these engine bays.. a JR cone will flow well, and fit there, but you would benefit from trying to duct a cold air feed to it also.
JR cone for 70mm MAF is £43

sounds like the stuff :)

[TubbyTwo]

they will be with me tomorrow
175mm
100mm
172mm
CENTER
410
CHROME
FC-08001
£52.85

Delivery is £7

Excellent :), whats the best way to order? email or call? :D

[ibizacupra]

call - 07976 800775

[TubbyTwo]

cheers, will give you a bell this afternoon :D

[tiresmokindad]

I am interested in JR Blue Jetex Cones:
80mm neck . But can you reduce its price. Can you give me a discount for it?

[ibizacupra]

i can do the price as posted price

[ibizacupra]

JR filters in stock currently BUMP

FR-07003 and FC-08001 both in stock

[Hartosh1]

Any of these in stock Bill, Green Twin Cone Filter (Conical) - 70mm Inlet?

[ibizacupra]

nope, JR's in stock, not green powercones

[Hartosh1]

Do you ever rest Bill :p Thanks i will give you a call tomorrow if thats ok about the JR? Been messed around with my green cotton order and im in desperate need of a replacement filter :(

[ibizacupra]

no problemo..

still working now.. - but tired and just off home now

regards
bill

[leoncupra666]

whats the best price for a FR-07003 posted

[ibizacupra]

£45 plus £7 delivery

[Hartosh1]

Never got round to phoning you Bill, your not by any chance in the work shop today are you? Looking to get a Jetex by saturday if thats possible?

[ibizacupra]

yes i am here as usual
07976 800775 to get me

[Hartosh1]

Sorted thanks Bill :D

[ibizacupra]

:thumbup:

[Hartosh1]

I just got another debit card sent through the door today Bill, can you let me know if you have any trouble with the payment cheers

[ibizacupra]

:confused:

Kilmarnock Home Delivery Out for Delivery (Home Delivery Service) 16/06/10

Its on the van to you now

[Hartosh1]

Ah nevermind i just recieved a new card through the post so thought it may have cancelled my other card and you wouldnt have got the payment cheers!

Edit its now in my hands ready to get fitted lol cheers

[robertj]

Hi Bill,

I want to order a Jetex cone filter from you for my LCR. (FC-8001 I beleive) plus all the associated connections required.

I can see on here that the best way to do this is to call you on your mobile number posted, so I just wanted to check what the best time to call would be? (I understand you're a busy man!)

Cheers, Rob

[ibizacupra]

call me normal hours if you can... and if I cant get to the phone do please leave a message as I will call you back. 07976 800775

regards
bill

[oldskool]

how much for a good panel filter for a leon cupra auq engine?
what other bits would i need to maximise the flow of air to it, drilling airbox at bottom?

[ibizacupra]

£43 for panel filter plus delivery

[George 3G]

Bill, thinking about either a Jetex or Green cotton filter for my MK1 LCR. Which do you think is best? Do you sell the filters alone or as a kit? I want to get the filter as close as I can to the inner wing.

Thanks

George

[ibizacupra]

i can add parts to the filter to push closer to wing..
comprises coupler, alloy and silicon to do so
jetex are popular and work well. i stock jetrex, and some green, but use more jetex cones of late

[George 3G]

So how would you do it bill? Obviosuly start with the MAF, I guess the MAF is male part, as is the filter. So would it be MAF -> Silicone Joiner -> Filter?

[ibizacupra]

So how would you do it bill? Obviosuly start with the MAF, I guess the MAF is male part, as is the filter. So would it be MAF -> Silicone Joiner -> Filter?

maf-> 80mm silicon straight coupler -> 80mm alloy joiner -> filter (with clips)

[George 3G]

This is what I'm after Bill. I want a black Silicone joiner for the moment due to the rest of my hoses being standard.

http://img.photobucket.com/albums/v248/BlAck0ut/IMG_1985.jpg

I want that size of Jetex filter too, I prefer it to the smaller ones, unless you advise against?

Thanks

George

[George 3G]

Can you give me a price for this set up please Bill?

[ibizacupra]

£48 filter plus £7 delivery for 80mm one

[George 3G]

Bill, is that the same as the one pictured above? Also would you recommend a cold air feed, or not necessary?

Thanks

[ibizacupra]

cold air feed always a good idea

[George 3G]

Bill, please confirm that the filter you have quoted on is the following filter pictured here:

http://img.photobucket.com/albums/v248/BlAck0ut/IMG_1985.jpg

[ibizacupra]

I cant see photobucket pictures from where I am currently.

looks like the larger FR08001, FC08001 is slightly smaller

[George 3G]

Bill, can I bring this post to your attention please?:

http://www.seatcupra.net/forums/showpost.php?p=3055405&postcount=1704

[ibizacupra]

you can but i cant get the link to work.
what does it say?

[Hartosh1]

I had another go at makeing the Jetex fillter look a bit more attractive in the engine bay today and failed, so I'v gone back to my modded airbox, I also drilled a few more holes in the bottom of the airbox to try and add a bit more induction noise

On a more concerning note when I removed the Jetex there was quite a lot of dirt partical's sitting in the TIP unfortunatly I did'nt take any pictures but Jonjay was there to witness the amount of dirt that was there and we were both suprised, Looking at the fillter from the insdie out you can see a lot of light passing through the fillter so it's easy to see why it let so much dirt through,
So moral is an open cone may let more through but at what cost


Thats what it says there Bill

[ibizacupra]

Never seen that myself.
These were used by Jabba on G60's as they had extremely good filtration whilst also flowing more.

Seeing bits of light through the cotton gauze is failrly normal, as the light oil coating is whats supposed to catch dust.

So what do Jetex say?
I dont make them JR do

Dirt In the TIP but not there before? Checked thoroughly before hand or only after when changing it again...?

Cars I have seen these on have'nt had dirt beyond the filter, so unless this is a dodgy one or dirt was there before, its not indicative of how they are in my experience of them

[Mylo]

would this actually be dirt and not just blow back from the PCV ?

[ibizacupra]

thats kinda of my question on the other thread..
there is always an oil residue inside the tip from the engine itself, and its breathing system.

[Mike R]

Hi bill, can i have a quick DELIVERED price, i need a blue jetex open cone filter for a 2005 mk1 L.C.R, also a piece to move it closer to the wing, thanks :)

[ibizacupra]

80mm silicon coupler £5.20
hose clips £2.80
80mm Alloy Joiner £8.91
80mm JR filter £40.85
plus vat & delivery

total = £77.37

[Mike R]

Lovely cheers mate, i shall ring next week to order! :)

[George 3G]

Bill, do you keep all those parts in stock? I want to order the same as Mike but with a green cotton filter instead.

Thanks

[ibizacupra]

not in stock, but stockist is close so i can collect what i dont have
green filters in 80mm i would need to order in, as i stock JRs

[George 3G]

Ok Bill. I did want a JR but apprehensive after DK's findings.

[ibizacupra]

Ok Bill. I did want a JR but apprehensive after DK's findings.

you have to remember DK's was a used filter not new one, and previously running a foam filter which I know allow dirt in from my experience.

JR filters work fine, no different to Green Filters just colour

[George 3G]

Ok Bill.

The JR filter I want is pictured at the top of this page, when you are able to view the picture please confirm that you can supply that and also a price.

I will also need the following:

80mm silicon coupler £5.20 (Black please)
80mm Alloy Joiner £8.91
plus vat & delivery

I've taken the hose clips out of the list as I'll by supplying my own.

Thanks,

George

[ibizacupra]

FR08001 is what is pictured, rubber ended one.
i carry these and the fc ones in stock usually.
£48inc vat for filter, plus the other parts you are after
regards

[George 3G]

Bill, I placed my order with you over the phone earlier and asked you to ship it to my work address, forgetting I'm off work Thurs, Fri and Monday. Can you ship it to my billing address please? I tried calling you but no answer

Thanks

George :)

[ibizacupra]

no worries
:thumbup:

thanks

[andy1010]

i am after an open cone filter for my 2001 ibiza cupra how much is one delivered thanks

[cupra-db]

hi bill what cylinder cone would you advise for a 2004 leon cupra, thanks, daz

[ibizacupra]

lc - fr07003 or lcr fr08001 or fc08001

[andy1010]

Hi can I have a price for an induction kit for my mk3 Ibiza cupra delivered please

[ibizacupra]

'an induction kit'

JR filter - £45
OR if you wish to mount it closer to the inner wing, you would need to add the following parts:-
70mm silicon 45 degree elbow - £16.92
70mm alloy coupler - £8.15
hose clips x 2 - £3.24

£82.81 delivered

[andy1010]

'an induction kit'

JR filter - £45
OR if you wish to mount it closer to the inner wing, you would need to add the following parts:-
70mm silicon 45 degree elbow - £16.92
70mm alloy coupler - £8.15
hose clips x 2 - £3.24

£82.81 delivered

Does it come with brackets to secure to properly

[ibizacupra]

nope, these are loose parts. i dont have a bracket for these

[andy1010]

How do you normally secure them do you have any pictures with the extra hoses so it's nearer to the wing

[ibizacupra]

no pictures of mine, but sure there's some on here somewhere..
what i have done on fc08001 filters for lcr's is add an m6 stud in the end which can be used to bracket to.. if you went for an fc07003 then this could be a mounting option

regards
bill

[cupra-db]

what are the prices of the filters recommended then bill? and whats the differences between them? thanks, daz

[ibizacupra]

prices are in 1st post on this thread

[ibizacupra]

*Bump*
1st post Prices updated

[Chris OB]

Hi bill,

Just a quicky.

How much would these cost in total including vat and delivery:
JR Blue Jetex Cones:
FC-7003 - 70mm Neck

Optional to push filter nearer inner wing:
70mm silicon 45 degree elbow
70mm alloy coupler
hose clips

Also whats the difference between using the 45 degree elbow and the straight silicone joiner that i have seen being used on here?

Cheers in advanced
Chris

[ibizacupra]

Hi bill,

Just a quicky.

How much would these cost in total including vat and delivery:
JR Blue Jetex Cones:
FC-7003 - 70mm Neck

Optional to push filter nearer inner wing:
70mm silicon 45 degree elbow
70mm alloy coupler
hose clips

Also whats the difference between using the 45 degree elbow and the straight silicone joiner that i have seen being used on here?

Cheers in advanced
Chris
as per 1st post

*NEW**NEW**NEW**NEW**NEW**NEW*
JR Blue Jetex Cones:
70mm Neck - £38.30
Optional to push filter nearer inner wing:
70mm silicon 45 degree elbow - £14.40
70mm alloy coupler - £6.94
hose clips - £1.62/each
prices exclude vat and delivery

45' angle on ibiza's else the filter will poke into the battery
The 45 elbow would need shortening to suit how close to the wing it is desired
regards
bill

[Chris OB]

Nice. I have a LC so would a 45' elbow be what i want or just a straight joiner?

Cheers

Chris

[ibizacupra]

Nice. I have a LC so would a 45' elbow be what i want or just a straight joiner?

Cheers

Chris

straight one would push it closer to inner arch on lc i think

[Chris OB]

thanks for the info bill. :)

[jonesy118]

Jetex cone turned up today... top service. Thanks Bill

[Stuart_cupra]

Thanks Bill, top service. Just got to work out how to fit the thing. Ive read about the Secondary air intake pipe, what do we do with that?

[jonesy118]

can either get an alloy or silicone pipe that T's off, as used for dumpvalves and plumb it back into the air intake, between the MAF and the cone filter, and I've also read you can just stick a breather filter on and cable-tie it up out the way.

something like this:

http://images.esellerpro.com/106/I/494/354/T70RedRace.jpg

or like this:

http://i20.ebayimg.com/06/i/001/3c/28/633b_35.JPG

[ibizacupra]

wot he said

:thumbup:

[Hullcupra225]

Hi Bill

Do you offer a next day delivery option? if so could you give me a quote on the jetex filter + the extra's to move it closer to the wing, with next day delivery

cheers

[Stuart_cupra]

Cheers Jonesy. Am gonna grab a Ripspeed stainless steel universal filter and cable tie it out of the way. Ill cablle tie the filter too until i get a jabba heatshield to keep it stable.

[ibizacupra]

all deliveries are supposed to be next day via dhl, reality however is its 2-3 days, depending on what time of day you catch me with the order, stock position etc

prices and options are in the 1st post for you to see

[Cupra Kev]

Hi Bill, just tried giving you a ring to order the JR Blue Cone + bits to move it closer to wing for a LCR210 (AMK) - will try you again in a bit

[jimbob99]

hi bill, how do i go about ordering the "kit" filter, joiner, coupler for the lcr? does the fc filter come with the securing nut inplace? how much is the carriage?
thanks jamie

[ibizacupra]

bell me on 07976 800775 with payment details & I can sort it

[p5yco]

Hi bill, i have a satndard 2003 lcr. From what i have read the boys tend to use a jetex fr08001 plus the necessary pieces to push it to the wing. Will i need a breather filter too? Could you give me a price for all necessary fittings, cheers

[ibizacupra]

Hi bill, i have a satndard 2003 lcr. From what i have read the boys tend to use a jetex fr08001 plus the necessary pieces to push it to the wing. Will i need a breather filter too? Could you give me a price for all necessary fittings, cheers

hi
no sai on lcr so no additional filter requird no.
prices in post #1 in this thread mate

copied here>
JR Blue Jetex Cones:
80mm neck - £44.26
Optional to push filter nearer inner wing:
80mm silicon coupler - £5.09
80mm Alloy Coupler - £7.71
2 x 70-90 hi-grip hose clips - £1.62/each

+vat
delivery is £8.50

regards
bill

[p5yco]

Thanks, so if my math is correct its £79.35 all in delivered? Do you have everything in stock and can i pay you via paypal? Thanks.

[ibizacupra]

Thanks, so if my math is correct its £79.35 all in delivered? Do you have everything in stock and can i pay you via paypal? Thanks.

in stock yes currently. Price is £79.35 all inc.. If paying paypal, please allow for their fee's however (3%-5%)

my paypal is bill@badger5.co.uk

regards
bill

[super_electric]

Hi Bill could I have a total price vat and P&P included please for “Jetex Cone filter LCR 2003 stage 1 with all the optional bits to push it nearer the inner wing.

Thanks Richard.

JR Blue Jetex Cones:.. Chrome end??
80mm neck - £44.26
Optional to push filter nearer inner wing:
80mm silicon coupler - £5.09.. Red??
80mm Alloy Coupler - £7.71
2 x 70-90 hi-grip hose clips - £1.62/each

+vat £10.55
delivery is £8.50
Total= £79.35

PS. Is the Jetex cone filter the Chrome end cap style and is it possible to have the silicon coupler in Red??:think:

[ibizacupra]

Hi Bill could I have a total price vat and P&P included please for “Jetex Cone filter LCR 2003 stage 1 with all the optional bits to push it nearer the inner wing.

Thanks Richard.

JR Blue Jetex Cones:.. Chrome end??
80mm neck - £44.26
Optional to push filter nearer inner wing:
80mm silicon coupler - £5.09.. Red??
80mm Alloy Coupler - £7.71
2 x 70-90 hi-grip hose clips - £1.62/each

+vat £10.55
delivery is £8.50
Total= £79.35

PS. Is the Jetex cone filter the Chrome end cap style and is it possible to have the silicon coupler in Red??:think:

Hi
FC08001 is the chrome ended one.. slightly smaller physically then the FR one which is rubber ended. same power rating from Jetex tho.
I now have couplers in red also.. although the red is +£2.50 more (inc vat)

regards
bill

[ibizacupra]

Thanks, so if my math is correct its £79.35 all in delivered? Do you have everything in stock and can i pay you via paypal? Thanks.

I am waiting stock, as are Jetex of the 80mm ones currently. weather/delivery havoc :(

[super_electric]

Hi
FC08001 is the chrome ended one.. slightly smaller physically then the FR one which is rubber ended. same power rating from Jetex tho.
I now have couplers in red also.. although the red is +£2.50 more (inc vat)

regards
bill

have just send payment (paypal) £81.85

JR Blue Jetex Cones:.. Chrome end FC08001
80mm neck - £44.26
Optional to push filter nearer inner wing:
80mm silicon coupler - £7.59.. Red
80mm Alloy Coupler - £7.71
2 x 70-90 hi-grip hose clips - £1.62/each

+vat £10.55
delivery is £8.50
Total= £81.85

[super_electric]

Hi Bill, can you confirm that you have received payment for the above item, and i know its a long shot but whats the chance of it arriving before christmas??

Thanks
Richard.

[ibizacupra]

Hi Bill, can you confirm that you have received payment for the above item, and i know its a long shot but whats the chance of it arriving before christmas??

Thanks
Richard.

no chance mate, sorry. Nothings arrived from Jetex, who in turn I think were out of stock.
New year at best now, sorry. No 80mm JR's here at all currently only 70mm ones which I have several of.

[p5yco]

Please could you give me a shout asap once you get the 80mm jetex cones in, thank you.

[super_electric]

have just send payment (paypal) £81.85

JR Blue Jetex Cones:.. Chrome end FC08001
80mm neck - £44.26
Optional to push filter nearer inner wing:
80mm silicon coupler - £7.59.. Red
80mm Alloy Coupler - £7.71
2 x 70-90 hi-grip hose clips - £1.62/each

+vat £10.55
delivery is £8.50
Total= £81.85


Hi Bill, is there any update on my order please?

[ibizacupra]

waiting on Jetex delivery which is due to me early next week.
can you pm me your name/address so I can check whats left here

thanks

[cuprar54]

hi, bill have you got any jetex cone filters in stock for a LCR and the bits to move it closer to the wing?

regds adam

[ibizacupra]

filters are due to me this next week.. non in stock anywhere currently until jete get their 2011 jan stock order..

[djkorky]

Hi Bill, ive got a mk3 ibiza cupra 20vt its currenty got a BMC CDA filter on it just now but im thinking of changing to an open cone. In your opininon is that a good idea? Also what 1 would you recommend and how much? Looking to change the turbo to a ko3s very soon as well if that makes any difference. Cheers

[ibizacupra]

hiya
70mm open cone like JR's work well. £48 for filter

[djkorky]

hiya
70mm open cone like JR's work well. £48 for filter

Does that include vat and delivery? Ill paypal you it if thats ok, cheers

[ibizacupra]

it does'nt include delivery, it does include vat - price change imminent however when new stock arrives this week.
paypal fine, if you cover their fee's. paypal: bill@badger5.co.uk
delivery is £8.50

regards
bill

[wratey]

hi bill

tried to get through to the landline number a few times, no joy. was wandering wats the best way to order the 70mm jetex cone with the parts to push it towards the wing, and if you have them in stock?

cheers, dan

[wild willy]

CB1.80 352bhp rated twin universal green cone. (power flow conical filter)

Can i have a price for the above please and from memory what is the approximate csa of the mouth at the end of the filter (opposing end to the neck), ie i wish to connect an airfeed straight into this cone if possible.

[steve carter]

Hi. Can you sort me a price for jetex open cone filter, as big as is possible for this model, and bits to move closer to wing for a 2002 `51` leon cupra 180. Also would i need a small breather filter and if so do you supply them and how much? cheers.

[ibizacupra]

hi bill

tried to get through to the landline number a few times, no joy. was wandering wats the best way to order the 70mm jetex cone with the parts to push it towards the wing, and if you have them in stock?

cheers, dan

as per the answerphone message on the landline, my mobile is where I am.. 07976800775

70mm in stock yes (3), and blue straight couplers also in stock for 70mm
regards
bill

[ibizacupra]

hi bill

tried to get through to the landline number a few times, no joy. was wandering wats the best way to order the 70mm jetex cone with the parts to push it towards the wing, and if you have them in stock?

cheers, dan

"big as possible" - would/could be the Fr08001 with reducing coupler, so an 80mm cone reducing to the 70mm maf you have with an 80mm alloy coupler..
this something like you are after?

[ibizacupra]

CB1.80 352bhp rated twin universal green cone. (power flow conical filter)

Can i have a price for the above please and from memory what is the approximate csa of the mouth at the end of the filter (opposing end to the neck), ie i wish to connect an airfeed straight into this cone if possible.

Powerflow Filter - Blue (Conical) - 80mm Inlet Dia, 200mm High [CB1.80] £92.75
http://www.greenfilters.co.uk/images/fig25.gif
Dimensions:

D1: 80mm
D2: 140mm
D3: 120mm
D4: 15mm
D5: mm
D6: mm
H: 200mm
End Cap Material: ALU
Inlet Angle:

[ibizacupra]

Look what arrived this morning :)
http://www.badger-5.com/bin/jetex-delivery.jpg

[p5yco]

copied here>
JR Blue Jetex Cones:
80mm neck - £44.26 (fr)
Optional to push filter nearer inner wing:
80mm silicon coupler - £5.09
80mm Alloy Coupler - £7.71
2 x 70-90 hi-grip hose clips - £1.62/each

+vat
delivery is £8.50

Hi Bill, are these still the correct prices, is everything in stock now? Cheers

[brad1]

Have you got pictures of your biggest jetex filter for the LCR bill? Also whats the difference between the FR and FC??

Cheers

[ibizacupra]

copied here>
JR Blue Jetex Cones:
80mm neck - £44.26 (fr)
Optional to push filter nearer inner wing:
80mm silicon coupler - £5.09
80mm Alloy Coupler - £7.71
2 x 70-90 hi-grip hose clips - £1.62/each

+vat
delivery is £8.50

Hi Bill, are these still the correct prices, is everything in stock now? Cheers

filters in stock yes

[ibizacupra]

Have you got pictures of your biggest jetex filter for the LCR bill? Also whats the difference between the FR and FC??

Cheers

http://badger-5.com/bin/liam-polo/polo-powder-3.JPG

pictured FR08001
FC one is slightly smaller and has chrome end

[super_electric]

Look what arrived this morning :)
http://www.badger-5.com/bin/jetex-delivery.jpg

:worship: excellent look forward to mine arriving in the post!! :rock:

[ibizacupra]

the box does'nt look like that now...
3 left.

[ibizacupra]

Comparison of FC08001 vs FR08001 filters...
56 pleats FC
55 pleats on FR

BOTH are 410bhp rated filters

more pointy one is FC08001
http://badger-5.com/bin/fr-vs-fc-08001.jpg

[ibizacupra]

A nice comparison and option for k04 80mm MAF owners...
when an FR08001 is not enough, try one of these Green mofo's

http://badger-5.com/bin/fr08001-vs-green.jpg

FR08001 pictured next to a Green filter...

£45 for FR08001, £58 for Green giant
no need to add sections to move the filter closer to the cold air feed with one of these.. Its already there! 300mm long x 190mm diameter, litterally twice the size for only £13 more

prices exclude vat and delivery

:)

[Cupra86rich]

Can i have a price for a green panel filter for a 03 leon cupra. How do i pay?

Thanks

[ibizacupra]

Currently £43+vat for one of these.. One in stock.
Delivery is £8.50

You can order by phone with card details to me on 07976800775 or paypal (covering their fee's) to bill@badger5.co.uk

regards
bill

[super_electric]

Hi Bill, is there any up-date reference my order which was placed on the 19.12.2010 as I still have not received my item: :shrug:

(paypal) £81.85

JR Blue Jetex Cones:.. Chrome end FC08001
80mm neck - £44.26
Optional to push filter nearer inner wing:
80mm silicon coupler - £7.59.. Red
80mm Alloy Coupler - £7.71
2 x 70-90 hi-grip hose clips - £1.62/each

+vat £10.55
delivery is £8.50
Total= £81.85

[ibizacupra]

real name would help please..
FC08001 are here so not a problem.. orders back from Dec were cleared unless I missed ( :hide: )
.. pm me your details and I will confirm for you

thanks

[super_electric]

My real name was sent along with all my details in a private pm dated 12.01.2011
But will send it again….

[super_electric]

pm sent.

Thanks Richard

[ibizacupra]

thankyou

[Hartosh1]

Have you got any of the FR08001 in stock Bill? Id like that green filter haha but theres no way that would fit in the mk4 bay i doubt

[ibizacupra]

nope, none in stock, but some due to me today I think.

[Hartosh1]

Ok ill just for your stock to come in then