Battery to amp in boot !!

[Waste-gate]

Hi folks,

Spend ages getting some new front peakers in my beeza.
What a nightmare but tis all installed.

I have mounted the amps in the boot and run cables down
either side of the car (having to remove panels and seats in process).

I have the +12V power cable coiled up in the passenger footwell
and I am not sure how to get it through the bulkhead to the
battery. can anyone help ??

Cheers

Marc

:repuke:

[Saul]

Is it a 20VT or 8v/16v

20VT, take out the glovebox and look to the top of the aperture.

Stick your hand behind the airbag mech and you will feel a gromet.

Now, get a mate/family member/well trained canine to look in the engine bay while you wiggle the wires to make sure you got the right gromet (ones a bar steward to get to)

Undo the screws on the header bottle/tank and shift it to the side, you will be able to see better

Now carefully run the cable thro there, its tough but you will get there.


If its a 8v/16v, pull the carpet back in the footwell, and have a look up behind the glove box. You'll be able to see the gromet.

Good luck

Saul