View Full Version : Stainless manifold for tall block 16v
I saw an ad by TSR which showed they are selling their own 4 branch for tall block 16v eg ABF, not sure if it's just stainless or stainless and 4 branch.
sean martin
10-06-2005, 00:31
i assume it will just be another version of the golf mk2 manifold (I think they are actually made by Magnex) with the pipes bent at an angle that will clear the bulkhead when fitted. The golf mk2 version that I have on my Ibiza is a 4-1 stainless job. cheers
Guys, just trying to get something sorted in my head....
Will a Mk2 Golf 4-1 or 4-2-1 exhaust manifold fit the Mk2 Ibiza/Cordoba 2.0 16v engine ?!?
Comtemplating mods for the future...... ;)
Yes but the ABF block is taller so you will have to tilt the engine/mod mount
Hmmm... will be leaving that one to the pro's then !!! ;)
Cheers for the info Ed, cleared up some confusion !!!!
ibizacupra
24-08-2005, 14:11
not sure Miltek made these for TSR
Just read your 1st post again Ed, did you manage to find out if TSR are making a manifold specifically for the ABF ?!? ;)
ibizacupra
24-08-2005, 14:20
give awesome a bell too. pretty sure they have supplied for this application.
Cheers Bill, will give them a call at some point.
I'm just comtemplating plans for the future, and doing some research before I get too in depth and realise it isn't possible! ;)
Awesome do sell one, a 4-1, but its for the short block engine and without the mount mods that sean has already mentioned, it will foul the bulkhead
Cheers
Rob
Just read your 1st post again Ed, did you manage to find out if TSR are making a manifold specifically for the ABF ?!? ;)
I don't any more than what I posted. It's for tall block engines.
Cheers guys, TSR might be getting a phone call to discuss options !!! ;)