Boost gauge

[ibizacupra]

the ibiza cupra does'nt come with a boost guage does it? Has anyone fitted on and if so where did you place it in the car and where did you tap off the induction system to feed it?
On previous turbo cars I have run I always found the boost guage very useful.

thanks chaps!
Bill
http://www.seatcupra.net/forums/smile.gif

------------------
http://www.badger5.co.uk

[Fl@pper]

can be purchased as a two gauge set , fits into the lower console JUST below the dash , If ya not sure how,what,where look in the latest ibiza 1.6 sport , they have em standard http://www.seatcupra.net/forums/smile.gif

not cheap either mind http://www.seatcupra.net/forums/frown.gif


------------------
DAZ the AMETHYST partsman

[ibizacupra]

What would be the price for the guage holders that fit in the 1.6S (temp oil or volts I guess - not boost in a 1.6)

I have a beezer on order through yourselves at Amethyst (yellow one) which is booked into RSD for the upgrades.

I have a guage (race-tec) which I bought for my turbo scirocco project which I was going to nick for the beezer. This console thing sounds Ok but I think I have seen pictures of the Ibiza Cupra R with the guages at the bottom of the centre console, which is too low for me, being out of eye line so far.

Is that the location of the pod on the 1.6S

thanks DAZ.
regards
bill

------------------
http://www.badger5.co.uk

[Fl@pper]

AYE , dats the ones , http://www.seatcupra.net/forums/frown.gif all show really down there , shame really .


------------------
DAZ the AMETHYST partsman

[djawol]

<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by ibizacupra:
Is that the location of the pod on the 1.6S
<HR></BLOCKQUOTE>

Bill,

If you have a look on the home page and go to the Castle Combe photos the dials are fitted in the red beezer.

Cheers
Andy

[djawol]

<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by flapper:
AYE , dats the ones , http://www.seatcupra.net/forums/frown.gif all show really down there , shame really .
<HR></BLOCKQUOTE>

Flapper, have you got an idea of price?

Cheers
Andy

[ibizacupra]

Cheers Andy & Daz.
I will get one fitted, might have to be a its own pod though somewhere visible.

regards
bill
http://www.seatcupra.net/forums/smile.gif

------------------
http://www.badger5.co.uk

[Cordoba16VT]

why don't u buy one from autometer www.autometer.com (http://www.autometer.com) 4401 or 4301 or 4303 is the part number,or go to www.summitracing.com (http://www.summitracing.com) and in the search for the product u write atm-xxxx "where the xxxx refers to the part # like 4303 etc.." u call also buy a gauge kit and hook it to the side of the wind shield.

------------------

[ibizacupra]

<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Cordoba16VT:
why don't u buy one from autometer www.autometer.com (http://www.autometer.com) 4401 or 4301 or 4303 is the part number,or go to www.summitracing.com (http://www.summitracing.com) and in the search for the product u write atm-xxxx "where the xxxx refers to the part # like 4303 etc.." u call also buy a gauge kit and hook it to the side of the wind shield.

<HR></BLOCKQUOTE>

I have the boost guage (racetech) but was wondering if there was a suitable place to mount it. I will go single pod mount... as they are available from Demon Tweeks.
thanks
Bill

http://www.seatcupra.net/forums/tongue.gif

------------------
http://www.badger5.co.uk