PDA

View Full Version : psi

bromy
13-06-2002, 20:34
:saber: does any body know what boost a ibiza cupra R is running at ???????????????????????????????
WeeJase
13-06-2002, 20:37
36 front 38 rear ,i think:D
Colin
13-06-2002, 22:40
think its about 0.7 bar 10 psi or thereabouts
Crofter
15-06-2002, 12:36
Cupra R's are suposidly ment to run at 0.8 Bar however that is not always the case , check out this rolling road print out ....
here (http://www.seatcars.net/forums/attachment.php?s=&postid=48431)
Steve3961
15-06-2002, 19:11
All 1.8T engines boost will vary on outside temperature.

If its hot, the boost will go up to compensate for less dense air.

If its colder it will drop slightley as the air is more dense.
ibizacupra
16-06-2002, 19:50
Originally posted by Crofter
Cupra R's are suposidly ment to run at 0.8 Bar however that is not always the case , check out this rolling road print out ....
here (http://www.seatcars.net/forums/attachment.php?s=&postid=48431)

That looks like 0.6bar more or less across the rev range.
Good old boost spike as ever I see. Good old SEAT/VAG

DOH!

regards
Bill
vibrio
21-06-2002, 18:52
thats not a boost spike :D
ibizacupra
21-06-2002, 21:43
Originally posted by vibrio
thats not a boost spike :D

1.5bar down to 1.2bar.
That aint no 20VT motor. :D

Bill
vibrio
22-06-2002, 21:04
don't do that anymore thanks to the bleed vlave.