View Full Version : IHI Fuelling Requirements
Hi guys, i`m currently getting bits together for my ihi setup. i`m looking to run about 300 bhp. i`ve got a 4 bar fpr to fit and some rc racing 440cc injectors. for 300bhp, will this be sufficient to use with the standard fuel pump?
regards, ollie
NO... ihi needs an S3 fuel pump(same as LCR i think), thats what jabba use anyhow, dont think it's modded, mad/bill will know
GOLF GTTi
05-08-2005, 21:09
For 300 Hp a 3 bar pressure reg should be sufficient with 440 injectors.
Ruddmeister
05-08-2005, 22:14
mad/bill will know
....but he's hacking round the 'ring in his little yellow shopping car
S4 maf, not fueling i know but something you should have.
nice 1!! i don`t suppose anybody has the part number for either the s3 maf, or the vr6 maf that jabbasport use?
For 300 Hp a 3 bar pressure reg should be sufficient with 440 injectors.
just spoke to jabba and the chap says that for 300hp, i`ll be ok with the 4 bar fpr and the 440cc injectors on the standard fuel pump. That`ll do me then!! just got my plumbing and downpipe to get sorted then i`ll be owf to jabba for me remap!
Just curious if you only want 300bhp why not go for a smaller thurbo than the IHI to reduce lag
Just curious if you only want 300bhp why not go for a smaller thurbo than the IHI to reduce lag
like what mate?
i was looking at e05 but i`ve heard there unreliable, with k04 i`d still need to get manifold etc, so it`d probabilly still cost as much.
i managed to get the ihi turbo and 440cc injectors really cheap. i modified the ihi myself so it`d fit and i`m making my own adapter plate to go onto the standard manifold
A&M motor sport are developing the AM04 results should be up with in a week or 2. see the AM section. should be good for 290bhp with a lot less lag than an IHI. if you do go I IHI id go for a bit more power.
Ah I see you already have the turbo :redface:
Ah I see you already have the turbo :redface:
i`d love to go for a bit more power mate but my little love chariot :blink: has done 98k now.
i don`t want to blow me gearbox or knacker me clutch up with running to much opwer through it.
oh, i`m also using the standard manifold and intercooler so i`ll be restricted to 300bhp really.
hmmmm, what gearbox options have i got really if it did bugger up? :(
dunno to be honest. I know bill has been having a few box problems. maybe hes sorted them by now though?
dunno to be honest. I know bill has been having a few box problems. maybe hes sorted them by now though?
ain`t he running silly bhp though?
Gearbox/clutch problems are part luck/part how its used. Who's mapping it. What about maf tube size/scaling of maf?. I aint 100% sure the S3 fuel pump is up to the job either with age/mileage even that may cause problems.
Cupra_Wayne
06-08-2005, 22:00
You're going to run it on standard intercooler? Hmmm :blink:
at 300bhp itll be low boost so shouldnt be too bad
ANDY BLUNT
07-08-2005, 00:00
You're going to run it on standard intercooler? Hmmm :blink:Bill ran golfy on standard intercooler for ages and jabba did. :cheers: Andy
yer i had a good chat with james from jabba and he said the standard intercooler will be fine. the gear box is the only real thing concerning me now.
on your ibizas is it a single side mount like my golf?
ibizacupra
09-08-2005, 19:27
Hi guys, i`m currently getting bits together for my ihi setup. i`m looking to run about 300 bhp. i`ve got a 4 bar fpr to fit and some rc racing 440cc injectors. for 300bhp, will this be sufficient to use with the standard fuel pump?
regards, ollie
whats the car you have?
ibizacupra
09-08-2005, 19:28
S4 maf, not fueling i know but something you should have.
why?
I dont need one..
its a scaling thing
ibizacupra
09-08-2005, 19:31
on your ibizas is it a single side mount like my golf?
http://badger-5.com/bin/intercooler/golf-ibiza-new-comparison.jpg
a comparison ^^^ for you
golf and ibiza are SMIC but ibiza one is tiny
why?
I dont need one..
its a scaling thing
not that you exactly need it.its either that or have the original tweeked. just my preferance would be the s4 maf
and somebody said you ran on this small one? is that true and what power were you running through that?
also what maf would you reccomend mate, jabba said the old vr6 maf would be ok? :confused: :blink:
if jabba say so its wright. like bill said its all down to scaling- you just have to adjust that
if jabba say so its wright. like bill said its all down to scaling- you just have to adjust that
and thats what jabba will do when on the rolling road.
just to badger or any other ihi`er, did it sound alot different when you got the ihi installed??
cpufreak
09-08-2005, 22:19
not that you exactly need it.its either that or have the original tweeked. just my preferance would be the s4 maf
just don't outbid me for the one on ebay, or I will hunt you down and steal your children. :roflmao:
:p
(I want it, and cheap, as I'm suspicious of the current one in my S4).
just don't outbid me for the one on ebay, or I will hunt you down and steal your children. :roflmao:
:p
(I want it, and cheap, as I'm suspicious of the current one in my S4).
Already got one ;)
ibizacupra
10-08-2005, 14:17
and thats what jabba will do when on the rolling road.
just to badger or any other ihi`er, did it sound alot different when you got the ihi installed??
sounds rude on boost. :)
hisssssssssssssssssssssssssssssssssssss
http://badger-5.com/bin/movies/StealthRR_Bill.wmv
http://badger-5.com/bin/movies/Badger@Kames05.wmv
http://badger-5.com/bin/movies/kames-badger5.wmv
http://badger-5.com/bin/movies/Badger5_ABS.wmv
Some clips of IHI ibiza in action Pasty Style...
ibizacupra
10-08-2005, 14:18
just don't outbid me for the one on ebay, or I will hunt you down and steal your children. :roflmao:
:p
(I want it, and cheap, as I'm suspicious of the current one in my S4).
Andy...
I'll have your sensor tube... dont need the sensor itself just the tube if you get a spare one and dont need it.
please? :)
Is it not a S3 air mass you use bosch No.0280218065? or VR6 for early managments part No.0280217512 I've got a conntact for these brand new.
Is it not a S3 air mass you use bosch No.0280218065? or VR6 for early managments part No.0280217512 I've got a conntact for these brand new.
and mine would be an old one with it being a non-fbw agu engine code!
just don't outbid me for the one on ebay, or I will hunt you down and steal your children. :roflmao:
:p
(I want it, and cheap, as I'm suspicious of the current one in my S4).
you`d have to catch me first with my ihi :hide:
sounds rude on boost. :)
hisssssssssssssssssssssssssssssssssssss
http://badger-5.com/bin/movies/StealthRR_Bill.wmv
http://badger-5.com/bin/movies/Badger@Kames05.wmv
http://badger-5.com/bin/movies/kames-badger5.wmv
http://badger-5.com/bin/movies/Badger5_ABS.wmv
Some clips of IHI ibiza in action Pasty Style...
thats sounds sick!! i want, i need!!! :-o :thumbup:
:idea: ditch scooby :idea: ihi golfy!! :cheers:
cpufreak
10-08-2005, 23:11
Andy...
I'll have your sensor tube... dont need the sensor itself just the tube if you get a spare one and dont need it.
please? :)
if I end up getting a full one including tube, sure thing :)
the one on ebay which I've bid on is sensor only though :S
cpufreak
10-08-2005, 23:18
thats sounds sick!! i want, i need!!! :-o :thumbup:
:idea: ditch scooby :idea: ihi golfy!! :cheers:
hrmmm...tell you what would be a laugh...a Twin IHI S4