View Full Version : Brembos in Stock now at last!
ibizacupra
02-09-2002, 20:43
I now have 3 FULL sets of Brembos brake upgrades in stock. Ibiza Cupra-R factory fitment, suits most Ibiza's, Mk2 Golfs, Corrado's etc.
Brakes are 4-pot Brembos, c/w all mechanical fixings required and instructions for fitment. 305x28mm disks.
Needs minimum wheel dimension of 7x16 ET35 with minimum of 38mm clearance between wheel hub face and rear of wheel spokes. (Ibiza Cupra-R wheels are OZ 7x16 ET35 for ref)
Price is now £450inc VAT plus carriage (29Kg package)
email me for more info at bill@badger5.co.uk
regards
Bill
Is it just a straight swap for the Mk2 Golf?
Cheers - R
Just ordered mine, thanks Bill..... now all I have to do is buy some new wheels!
Yet another month in which I've failed in my plan to reduce my debts!
Bill, at a guess I'd say that the spare wheel wont fit over the Brembos, but saying that do they use the same spare wheel on the Cupra Rs? If so then it must fit!
Ben
ibizacupra
03-09-2002, 13:32
Originally posted by BenS1
Just ordered mine, thanks Bill..... now all I have to do is buy some new wheels!
Yet another month in which I've failed in my plan to reduce my debts!
Bill, at a guess I'd say that the spare wheel wont fit over the Brembos, but saying that do they use the same spare wheel on the Cupra Rs? If so then it must fit!
Ben
The spare wheel thing is easily resolved by running the space saver on the rear only, which would be my preference anyway...
Not sure what spare wheel is fitted on Ibiza-R's though... Anyone?
Bill
ibizacupra
03-09-2002, 14:13
Originally posted by rakh1
Is it just a straight swap for the Mk2 Golf?
Cheers - R
It will depend on the model Mk2 you have.
If it has 256mm front disks now, then it should be OK yes.
Brake line would need to be checked however as the Ibiza fitment is rearward of the strut and a Golf Mk2 is forward of the strut. Otherwise mechanically, the hubs remain the same.
You need to check your wheels are large enough and with enough offset.
You need 38mm clearance between the wheels hub face and rear of the spokes and be 16" diameter minimum.
regards
Bill