Discount Offer

[AwesomeMark]

Hello Everybody

Awesome would like to offer a discount to all SCN members for the next eight weeks.

The offer will be : A 15% discount on all workshop related labour including Servicing.

We would also like to offer a discount to SCN members on the following listed products, this will also be 15%

Neuspeed
K&N Filters
Pipercross Filters

Powerflex Bushes
Tarox Brakes (Excluding Big Brake Kits...This will be 5%)

* THIS OFFER IS ON THESE PRODUCTS ONLY AND IS AN ADDITIONAL DISCOUNT TO OUR ALREADY DISCOUNTED PRICES

Phone for a deal on our new range of Indago Sat nav and our Snooper radar detectors...www.awesome-gti.co.uk/snooper.html

Check out our website for already discounted Forge Products www.awesome-gti.com


Also we our offering a discount on a rolling road session, where you will get three power runs and a laminated graph, our usual price is £60.00 plus vat our offer price will be £45.00 plus vat. (This does not include rolling road diagnostics and tuning).

Please quote this offer when booking your vehicle in or when ordering your parts over the phone, this offer cannot be offered via our on-line shop.

Regards
Mark

[m0rk]

Can you get me a price on a Neuspeed short shifter for the 020 Box? (I'm pretty sure tehy do one)

Cheers

Mark

[The_one]

Could you give me the discounted prices for Neuspeed Front & Rear ARB's for a Mark 3 Ibiza Please.

22mm front and 25mm rear

[Sisson]

for the ibiza mk4 intercooler, is the price £535.50 or is there discount to take off?

cheers

[AndyHazza]

Mork: at the risk of sounding stupid.... which car is it for matey???

The One: Front 22MM ARB will be £131.75+VAT and the rear 25mm will be the same at £131.75..... I have 1 front ARB in stock but no rears at the moment. Normal wait should be about 2-3 weeks

Sisson: It is £535.50+VAT including the discount, the normal retail is £595+VAT :)

[m0rk]

Erm, hydrid kinda car... so... rod change 2.0 8v Ibiza, Golf II 1.8 16v

I think it mounts gearbox end rather than under the shift lever

[AndyHazza]

Mork: I had a quick word with JOhn and if its a MK2 16V Box then it should be this one.... http://www.neuspeed.com/products/product_details.asp?app=23|G2&type=3&ltype=ns_euro&p_id=461

That seem right???

[m0rk]

that looks like the kitty.

[Trumpetman21]

I'm already booked in for a service with your good selves this Saturday AM - can I have a discount on this if one hasn't already been applied? (cheeky I know!)
;)

Ta much!
:D

[edc]

Can I have a quote for parts for 97 mk2 16v Ibiza:

Powerflex wishbone bushes (front bush mk3 Golf, rear bush mk3 Gold 4 stud IIRC).

Can you also supply Bonrath rear beam bushes for mk4 Polo circa 1995.

:cheers:

[AndyHazza]

Mork: Works out at £42.50+VAT instead of £50+VAT

TrumpetMan: You should have a PM :)

EDC: Unfortunately i cant get the Bonrath rear bushes anymore :( the powerflex fronts though normally retail at £15.99+VAT each, we can then do them at £13.55+VAT each :)

[AndyHazza]

Actually made a boo boo there... EDC the bushes would be a further 15% off our already discounted prices, therefore £11.52+VAT a bush :D

[edc]

Actually made a boo boo there... EDC the bushes would be a further 15% off our already discounted prices, therefore £11.52+VAT a bush :D


Same price for the front bush and the rear bush? If so, I'll be calling very soon.

[m0rk]

Cool - I'll check on Saturday when I pick up the box that it's as that image & call you on Tuesday - I guess it's something you need to order rather than a stocked item?

[AndyHazza]

For you Mork I have 1 in stock :)

EDC: Yes thats for the front wishbone bushes (all 4 of them, the front inner wishbone fronts, and the front inner wishbone rears)

[m0rk]

It might be prudent to pick it up since I'm up that way... I'll call on Saturday to see if you're still open (or not) :D

[AndyHazza]

How do you mean still open???

[m0rk]

Open as in the opposite of closed (normally when you go home for the day)

Price is good though!

[WeeJase]

2001 skoda octavia vrs (AUQ engine code)cambelt/tensioner/metal impellared water pump,fully fitted by your good selves.
change of brake fluid on the above also,with decent fluid.
i bring cash ;)

[AndyHazza]

Jason... Normal price is £330+VAT for the cambelt, tensioner, pulley, waterpump, coolant etc fitted, so it would be £280.50+VAT - Brake fluid change is a seperate thing, normally costing 59+VAT with super dot 4 brake fluid so therefore £50.15+VAT

Hope that helps :)

[Saul]

andy, what would you charge for fitting a TIP on AUQ engine 180bhp?

ta

[WeeJase]

i'll check with the treasurer and get back to you via the blower.thanks

[WeeJase]

andy, what would you charge for fitting a TIP on AUQ engine 180bhp?

ta
i'll fit it for free(to MY motor):D

[Saul]

i'll fit it for free(to MY motor):D

i have thought about DIY, but you've seen the size of my hands :whistle:

[AndyHazza]

is it the silicon one your wanting saul??

[Saul]

ive got / can get the hose mate, its the forge one

just want a price for fitting andy :cheers:

[spyke85]

How busy is the rolling road Andy?

[PhilW]

Andy will the Neuspeed power steering caps fit the Ibiza tank?

And do you have the dipstick in stock?

[AndyHazza]

Saul: 1 hour labour so normally £45+VAT therefore £38.25+VAT :)

Spyke: Not too bad... what you thinkin?? remap and a Rolling Road run :D

Phil: I'd have to try and check on the steering cap, might try one on mine :) does the standard dipstick have a triangular end or a round end??

[spyke85]

Saul: 1 hour labour so normally £45+VAT therefore £38.25+VAT :)

Spyke: Not too bad... what you thinkin?? remap and a Rolling Road run :D

Phil: I'd have to try and check on the steering cap, might try one on mine :) does the standard dipstick have a triangular end or a round end??
Thinking just a rolling road run to begin with! Want to go out in a remapped 130 before I go for it though!

[PhilW]

Andy,i got a feeling its the round end on it. Let me know about the PS cap tho, will deffo have that if it fits.

[AndyHazza]

No worries Phil, i'm not in my car today so can't check unfortunately today...

Spyke: My mate kev who works here has a chipped 130 Leon

[cordobabrendy]

andy any prices on downpipes for the LC? ...ffs this car modding lark is getting me down!!

[AndyHazza]

Cordobabrendy: The normal retail is £398+VAT, we are doing them at £358.20+VAT so with this discount it would be £304.47+VAT!!!

[cordobabrendy]

hmmm 357 plus delivery, Andy youre doing this on purpose, ill be divorced before im married! Ill get back to you.

edit: what is the diameter at the end of the cat where it meets the rest of the system btw? 2 1/2" or 2 1/4"?

[AndyHazza]

2.5'' it will be, hey dont blame me.... i cant help giving good deals away like this :p

[Adam.g]

Could you get me a price on a Milltek high flow cat for an Audi S3 99' please??

[PhilW]

Andy the dipstick is a triangular look in a nice orange. Will it fit, as well as the PS cap?

[AndyHazza]

Phil... I'm taking my car in tomorrow so i will see if i have one in to try... also the dipstick if i get chance :)

Adam... the milltek cats are normally 743.75+VAT, our special is £669.38+VAT, so with the forum discount too they work out at £568.97+VAT!!!!

[Adam.g]

I have the milltek cat back fitted at the moment, will it need remapping once the sports cat is fitted?

[AndyHazza]

Who have you had the car mapped with?With the APR our stage 2 is designed to work with a 3'' downpipe and cat, not the replacement sport cats with the standard downpipe. I'd say you to make the most of them your best getting it mapped again.

[jhlcr]

hi andy, got my lcr coming to you on saturday for a service and maybe new discs and pads, do i just ask for you to get this discount? what discs and pads do you do if i dont stick with seat ones and how much? cheers mate!

[AndyHazza]

Hi mate, the discs would have to be seat's own as we cant get any other replacements, the pads we do can get some mintex ones. Yeah matey just ask for me and i'll sort the service with the discount :)

[225]

Hello mate. Do you stock the ACT induction kits or have kits that would fit the chim?
Don't K &N do a replacement filter?

Cheers

[jhlcr]

thanks mate, thats great.

[AndyHazza]

225: What are the details of it matey?? Year and engine size etc?

[AndyHazza]

PhilW: i checked those parts today and they will both fit... the powersteering cap is the same as a MK3 golf and the dipstick will go on fine. I have them both in stock :)

[Adam.g]

Andy

Its remapped by Amd, do milltek do a 3" downpipe for the S3 then? If so how much for that as well?

[225]

225: What are the details of it matey?? Year and engine size etc?

Its Chimaera 450, 4.5 V8 2001. I've only ever seen the ACT kits but if you know of others that would be cool.

:cheers:

[PhilW]

PhilW: i checked those parts today and they will both fit... the powersteering cap is the same as a MK3 golf and the dipstick will go on fine. I have them both in stock :)

Happy days!!!

Will be ordering on tuesday if thats ok.

Cheers for that andy. Speak to you then.

[AndyHazza]

Adam: Unfortunately not mate, the one we sell is an APR one, its £995+VAT :headhurt: but it will mate up to the Milltek catback

225: i cant seem to find any at the moment unfortunately mate :(

PhilW: no worries mate, just ask for me :)

[Neel-Cupra]

hi andy .. how much for a milltek cat back exhaust system?

[225]

Adam: Unfortunately not mate, the one we sell is an APR one, its £995+VAT :headhurt: but it will mate up to the Milltek catback

225: i cant seem to find any at the moment unfortunately mate :(

PhilW: no worries mate, just ask for me :)

No worries cheers anyway.

[AndyHazza]

225: i'll keep looking for you though, if i find anything i'll let you know :)

Supercupra: normal retail is £292.00+VAT, we are doing them at £262.80+VAT, so with this special discount it would work out at £223.38+VAT!!

[gadgetmaster]

Hi Andy,How much for rear pads and a short shifter leon cupra 2001

[Russo]

Hi Andy,

Could you please give me a quote for the miltek turbo-back exhaust for the ibiza cupra mk3 please. Many thanks.

[AndyHazza]

gadgetmaster: i would need to know if the shifter ontop of your gearbox has a pin or ball stud on it, if you look at where the cables join onto the shifter, if you can just see a circle with a flat surface resting on top of one part then its a ball type, if you see a pin coming up through a circle with a clip holding it in place then its a pin stud..... either way its the same price... Normally £145+VAT therefore comes to you at £123.25+VAT ........ as for rear pads - do you just want standards?

Russo: normally for the complete exhaust it would be £398+VAT for the downpipe and £292+VAT for the cat-back. With the discount we are selling them with as normal, plus the extra 15% off it would work out at £298.50+VAT for the downpipe and £219+VAT for the cat-back!

[daljomo]

hi andy are you going to be running your extra dsicount offer again soon as im after a neuspeed lower strut brace for my leon cupra

[AndyHazza]

Its still on for the next few weeks mate, so a for a lower strutbrace you would need to tell me if you wanted a billet one or not to start with. then if you want it polished or black.

[Russo]

Russo: normally for the complete exhaust it would be £398+VAT for the downpipe and £292+VAT for the cat-back. With the discount we are selling them with as normal, plus the extra 15% off it would work out at £298.50+VAT for the downpipe and £219+VAT for the cat-back![/QUOTE]


Thanks Andy, how much labour costs would be involved to fit it as well. Sorry for being a pain! ;)

[AndyHazza]

no worries mate, i'd allow 3 hours in total as those downpipes can be a bit tricky with everything shoe-horned in there. So normally would be £135+VAT for fitting now £114.75+VAT for fitting

[Russo]

Thanks again Andy. Just to double check, this discount offer is running for a few weeks?

[daljomo]

hi andy
me again im after the neuspeed lower strur brace polished item no 260, also could you tell me if the lower intercooler pipe part no 1029 will fit my 2001 leon cupra
cheers mate:D

[evo2345]

what the cost for the cat back and turbo back Miltek for Ibiza mk4 FR1.8 20vt??

[BlackCupraa]

Quick one for you guys.

Do you do any Manifolds and Exhausts for a 1.4 16v (100 bhp) Polo on a 03 plate (twin headlight shape)?

If so how much and what manufacturer.

[AndyHazza]

i will have a butchers for you all tomorrow, been silly busy so trying to keep on top of everything :)

[Mitchy]

Andy did you sell that Forge FMIC?

The last time i looked on ebay, someone with 0 feedback was winning the auction! Always weary of people like that.

If not and you still have it,i may be interested;) :)

[Ric 2001]

Can you give us a quote for a 10k service on a MK4 Ibiza Cupra, also prices for Tarox Sport Japan Discs for front and back + Tarox Strada Pads.

[AndyHazza]

daljomo: where did you get those part numbers from??? The lower strut brace is normally £90+VAT for a polished non-billet one, and £160+VAT for the billet ones (same price if its black or polished). So its 15% off those, making £76.50+VAT and £136+VAT. The lower intercooler pipe should fit on yours no problem - normal retail is £59+VAT so it would be £50.15+VAT

Evo2345: the catback system retails at £290.70+VAT, we are doing it at £261.63+VAT so with the extra 15% it comes to £222.39+VAT, for the turbo back you woul just need to add the price of the cat and downpipe, whic normally retails at £285+VAT, we are doing it at £256.50+VAT so it would be £218.03+VAT

BlackCupra: i have been looking around mate and to be honest i have strugled to find anything at all :(

Mitchy: as far as i know matey the front mount did get sold, someone got a bargain i think!

Ric: Is yours the petrol or diesel cupra?? Either way it should still be a similar price, normally £135+VAT so then minus 15% which is £114.75+VAT.
As for your brakes i need to know if they are 280, 288 or 312mm fronts.

[AndyHazza]

Russo: yeah its on till the 25th of June :)

[Ric 2001]

Ric: Is yours the petrol or diesel cupra?? Either way it should still be a similar price, normally £135+VAT so then minus 15% which is £114.75+VAT.
As for your brakes i need to know if they are 280, 288 or 312mm fronts.

Petrol mate, think they are 312mm fronts, looking for technical data on the net but can't find the tech spec on the seat website.

Also can you get hold of powerflex Exhaust Mounts.

[AndyHazza]

okey doke, they are basically the same as a golf mk4, well should be, do you have the 4-pots on the front?? if so that might make it slightly harder to sort.

[Russo]

Russo: yeah its on till the 25th of June :)

Cheers Andy, still got a bit of time then,:)

[AndyHazza]

yeah but you know you want it now :D

[Ric 2001]

okey doke, they are basically the same as a golf mk4, well should be, do you have the 4-pots on the front?? if so that might make it slightly harder to sort.

This is the new beeza but looks like its the same

found a bit more info:
Front 312 x 25
Rear 232 x 9

4-pots on the front, we'll can't remeber if its 3 or 4 but its the seat sport calipers, if that helps?

Also just read on a website that the service indicator should come on around 2000 miles before the 10k mark. Mine hasn't yet!!! (on 9200) Is this normal? Also none of the light have ever worked in the middle of the square panel, between the rev counter and speedo.

[AndyHazza]

With the brakes i will check the measurements and confirm it with them, as for the service indicator, i was always under the impression it was for around 1,000 miles or even 500 before your service when it cames on. With the centre lights not working, do they not even come on as testers when you put your ignition on???

[Trumpetman21]

Just for your info, regarding the service indicator I had mine serviced @ Awesome reading just under 10400 miles and it had NEVER come on. Think a lot of it depends on how & where you drive....most of my miles are motorway miles.
:shrug:

[AndyHazza]

Its a weird one for definate, my service light doesnt say when its due, just flashes service at me!

[daljomo]

hi andy thanks for the reply i got the numbers of the awesome gti online store page, how do we go aboot ordering these things can we do it online or over the phone and if so what do we need to quote to get the discount:)

[AndyHazza]

just feel free to give us a call, just mention your off the forum and what you wanted to order, will get it sorted no worries

[PhilW]

Just like to say thanks andy, got the parcel this morning after missing it yesterdat, fits quality very happy with it and the discount! lol.

Will be gettin an oil cap soon as well.

[BEOWULF]

hi andy
how long does it take do a stage 1 remap and how much notice do i need to give u to get it booked in.

[Lorna]

Hi,

Can you please tell me how much it would cost to fit a new cambelt to my MK3 Ibiza Cupra. Inc parts and labour.

Cheers

[gazjones]

hi could i get a price on miltek cat back system for mk4 ibiza fr price for both resonated and non resonated please with postage would be very well appriciated, i rang up about 6 weeks ago and got quot on full system and was told £10 for delivery. ow and it will be twin pipes not oval if you do them

[PhilW]

Andy, can you do me a favour? Can you have a look to see if the Neuspeed washer bottle cap fits the ibiza? Cheers.

[foxes]

Hi

Any prices on Neuspeed front & rear ARBS for a LCR(225)?

[AndyHazza]

Right.........

Beowulf: Stage1 takes around 30mins, including a full diagnostics check before and after. You dont really need to book in as it is us guys on the sales desk that sort it.

Lorna: For a full cambelt service including the waterpump, tensioner, pulley, belt itself and all anti-freeze/coolant, supplied and fitted is normally £330+VAT so would be £280.50+VAT with the 15% off.

Gazjones: The normal retail for the RESONATED system is £290.70+VAT, we are selling it at £261.63+VAT, which means it would be £222.39+VAT which would be £273.06inc VAT and delivery. NON-RESONATED would work out at £133.43+VAT which would be £168.53inc VAT and delivery.

Phil: I will hjave to wait till i'm back in work to check for you... off today :)

Foxes: It really depends what sizes you are after... 22 or 25mm on the front, 25 or 28mm on the rear....

[gazjones]

didnt think there would be that much differsnce in the price. the non resonated will be back box and middle section from the cat back? just a question how loud is the non resonated comapired to resonated is it really loud not wanting it stupidly loud thats all

[Saul]

non resonated is no middle box from memory = LOUD

[gazjones]

very loud like boy racer type cos i dont want that but at that price it is a great deal i think

[BEOWULF]

Beowulf: Stage1 takes around 30mins, including a full diagnostics check before and after. You dont really need to book in as it is us guys on the sales desk that sort it.

exllent will get myself up there at the end of may when i get paid

[foxes]

Right.........


Foxes: It really depends what sizes you are after... 22 or 25mm on the front, 25 or 28mm on the rear....

So Andy. what size would you recomend for the LCR? or what is the most common. thanks

[Ric 2001]

very loud like boy racer type cos i dont want that but at that price it is a great deal i think ;)

If you listen to my mk4 vid in the video section. That my non-resonated changing from 2nd to 3rd at around 3-4000 rpm, and yeah their loud if your in residental areas. The sound just bounces of the houses.

http://www.seatcupra.net/forums/showthread.php?t=85783

Andy, did you find out if them Tarox discs would fit?

[AndyHazza]

Gazjones: The non-resonated system is bound to be louder due to the lack of a middle silencer, the thing with exhaust notes is that they are a very subjective thing. What i find to be a slightly too loud exhaust someone might see as being spot on or not loud enough, and vice versa :)

Ric2001: Sorry but still chasing it up, knew i shouldnt have had yesterday off!! :( but had fun at alton towers so in a way i'm not sorry :D lol

Beowulf: No problem at all matey, just give us a call when your ready :)

Foxes: Its all up to you mate :) one mk4's etc most people go for 25 on the front and 28 on the rear. It really depends what you would like to do with the car, just fast road or possible track action too?

[Ric 2001]

Are defi gauges, and controller unit on the 15% offer?

Did you ride Rita? ;)

[AndyHazza]

I'm afraid they arent on the 15% Ric no :(

As for Rita, hell yeah rode rita twice ;) Nemesis 3 times, air 2, oblivion 3, spinball wizzer 1, log flume 1, river rapids 5!!!, runaway mine train 1, duel 1

[foxes]

Foxes: Its all up to you mate :) one mk4's etc most people go for 25 on the front and 28 on the rear. It really depends what you would like to do with the car, just fast road or possible track action too?

Hi Andy. ill have the price for the 25(F) & 28(R) if thats what most people go for.
its just for normal fast road spec i want (neuspeed).

any prices for fitting too pls Andy!

Also is their a good damper or coilover kit for the LCR?
Thanks

[AndyHazza]

Foxes: 25mm front ARB normally £155+VAT so would be £131.75+VAT, the 28mm rear ARB is £195+VAT so would be £165.75+VAT

Fitting is 1 hour for the rear, 2 hours for the front and would require a 4 wheel alignment. Labour is normally £45+VAT an Hour so £38.25+VAT an hour and a 4 wheel alignment is £67.50+VAT so would be £57.38+VAT

As for suspension setup there are several choices - coilovers, springs and dampers or just dampers. I recently had someone asking after Koni's new FSD shocks for the Leon as he wanted to keep the standard ride height and comfort but improve handling.

[foxes]

Andy.

i want a 20-30mm drop but want a improved ride (say with ARBs fitted too)

Thinking FK or even Eibach.
Dont mind damper adjustments but dont think ill be using it.
Cheers

[flashbsd]

andy, if i order a full miltek/sports cat for a mk3 ibiza, how long will it take for them to arrive? Is it 2.5" and 100cell or 200cell? and how much is postage?

I assume the price is the same as previous quotes? chuffed with the discount you guys are offering!

Thanks

[AwesomeSarah]

flashbsd just to let you know i'm checking up on availability today.

[flashbsd]

thanks :) , may also want a powergasket for the intake.

[AndyHazza]

I wish Sarah would log out when she's used my computer!! lol was me all along. Right Milltek have the system in stock. Would you want it posting out to you or fitting?

[Ric 2001]

Hi Andy, did you find out if them discs would fit the mk4 cupra? Also would be interested in a powergasket price for fitting. Also could you book me in for a 10k service for the 27th of May?

And if them brakes would fit, would like to do them and the powergasket on the same day as the service.

Also can you get hold of powerflex Exhaust Mounts for the cupra?

[flashbsd]

I wish Sarah would log out when she's used my computer!! lol was me all along. Right Milltek have the system in stock. Would you want it posting out to you or fitting?

posting mate, what cell is the race cat mate? and how much is postage?

[AndyHazza]

flashbsd: okey doke... the catback is normally £292+VAT, we do it at £262.80 so would be £223.38+VAT.... the downpipe is £398+VAT retail, we do it at £358.20+VAT so would be £304.47+VAT. So if you wanted both posted to you would come to £631.97 inc VAT.

Ric2001: i chased up Tarox today and they reckon the discs off a 4motion golf or TT quattro should be ok, as they are exactly the same size as you mentioned. On the 27th of May i could get you in for the service no problem, i would struggle to do the power gasket and brakes on the same day. I should be able to do one or the other....

[h17och]

how about 1.8t neuspeed dipstick?

Also power gasket?

cheers

HoocH

[AndyHazza]

H17OCH: I dont have any of the dipstick handles in stock at the moment unfortunately but am expecting some within the next week or so. They nromally retail at £30+VAT so would be £25.50+VAT. I have the powergaskets in stock, they are £45+VAT unfortunately cant do the discount on them.

[daljomo]

ile be placing my order for a lower polished strut brace this afternoon do i need to speak to you in person?

[andyj]

Andy, any chance of letting me know what parts are included in the Powerflex front bush kit (without roll bar mounts) for a Mk3 Golf ? and a price to would be good :D

Listed on your website @ £51.04.

Cheers,
Andy

[AndyHazza]

Andyj: will be the 4 front wishbone bushes as far as i am aware.

[andyj]

Cheers Andy :)

Just realised that the 'kit' won't be any use anyway, as the Mk2 Ibiza needs the 2 front bushes from a Mk2 Golf and the 2 rear ones from a Mk3 !!

Would only work out about £3 cheaper buying it as a kit anyway!

Out of interest, when does the 'offer' end ?!? :D

[h17och]

Can you hold me a dipstik them please

HoocH

[AndyHazza]

H17OCH: need you to ring up please matey if you can :)

AndyJ: the main discount offer is on till mid/end of June

[Ric 2001]

Andy could you PM me the total price inc VAT for the work to be done on the 27th May. Cheers

[AndyHazza]

PM sent :)

[WeeJase]

andy,i'll call you tomorow to book the car in for the cambelt/tensioner/water pump and fluid change etc.
remind me about FSD dampers if i forget,been talking to sarah about them,i'd like to order a set also
http://www.seatcupra.net/forums/showthread.php?t=84289

[PhilW]

Andy, i got more stuff for you. :D but you need to check something for me. Will call you tomorrow.

Cheers.

[stpete]

Would the discount labour inc fitting cruise? Got the stalk but not cables can you give me a price please? its a 225 LCR. Thanks!

[AndyHazza]

Hi mate,

We will only fit cruise control as a full lot mate, the stalk and our own loom, sorry :(

[stpete]

no probs, got stalk cheap then chickened out LOL!
Gonna have to book soon so I can have the full APR experiance!!!!

[AndyHazza]

hell yeah, no worries at all matey, just give me a shout and we can do a trial for you.

[gazjones]

recived my milltek cat back today thanx for the great price! shame i cant get downpipe in this offer!

[flashbsd]

andy, i want to order the CAT now, is the price still the same etc? :)

Thanks

mk3 ibiza cupra, is it a 100cell or 200cell cat?

[AndyHazza]

Its 200cell if i remember correctly. Milltek say the 200cell is better flowing than a 100cell. You'd need to give us a ring matey and i can get in cintact with Milltek to check on availability.

[daljomo]

whens this offer running to as im after a lower polished front strut brace for my leon cupra and a bit short of readys till next week:confused:

[AndyHazza]

Till the 25th matey.

[jetsetjimbo]

Hi,

Can you give me a price for a 22mm front and 25mm rear ARB for an LCR? Also what would the fitting set me back?

Also interested in the price fro Cruse control and the stage 1 remap.

Thanks

James

[daljomo]

made my order today , thanks a lot andy, looking forward to delivery:)

[evo2345]

[QUOTE=Awesome_Andy]Right.........

Gazjones: The normal retail for the RESONATED system is £290.70+VAT, we are selling it at £261.63+VAT, which means it would be £222.39+VAT which would be £273.06inc VAT and delivery. NON-RESONATED would work out at £133.43+VAT which would be £168.53inc VAT and delivery.
QUOTE]


Andy is this price for the Non Resonated just the back box??? if so what would it be with the middle pipe to

[Prebs]

Andy: My friend is driving a Leon 1.8t 4x4. Do you have race/sports cat for audi TT quatro that will fit this car?

Prebs

[evo2345]

[QUOTE=Awesome_Andy]Right.........

Gazjones: The normal retail for the RESONATED system is £290.70+VAT, we are selling it at £261.63+VAT, which means it would be £222.39+VAT which would be £273.06inc VAT and delivery. NON-RESONATED would work out at £133.43+VAT which would be £168.53inc VAT and delivery.
QUOTE]


Andy is this price for the Non Resonated just the back box??? if so what would it be with the middle pipe to


Any news??

[daljomo]

wow talk about fast delivery i placed my order for my lower strut brace yesterday and it arrived first thing this morning thanks a lot andy might even have time to get if fitted for sunday
cheers again:lol: :lol:

[AndyHazza]

EVO: sorry mate i've been trying to figure out what was happening there, i have realised now.... i took the prices from our website, the bottom value i took for the non resonated was actually just the price for the back box :(

Daljomo: no worries mate, we try and be as efficient as we can :D

[AndyHazza]

Prebs: i have looked around for you and cant really find anything. We dont get the 4x4 over here so its hard to get the bits. Supersprint dont list a downpipe, they list an exhaust but cat back and cat replacement pipes. I have the feeling though that the normal 3'' downpipe that we use for the TT's, S3's and Cupra R's should fit but have no quarentee.

[evo2345]

EVO: sorry mate i've been trying to figure out what was happening there, i have realised now.... i took the prices from our website, the bottom value i took for the non resonated was actually just the price for the back box :(

Daljomo: no worries mate, we try and be as efficient as we can :D


how much for the middle pipe and back box with delivery and vat

[jetsetjimbo]

Hi,

Can you give me a price for a 22mm front and 25mm rear ARB for an LCR? Also what would the fitting set me back?

Also interested in the price fro Cruse control and the stage 1 remap.

Thanks

James

??? :)

[AndyHazza]

Evo2345: PM sent :)

Jimbo: sorry mate :) With the 15% discount the front 22mm would be £123.25+VAT, the rear 25mm would be £157.25+VAT. Cruise is £149+VAT and a single remap is £375+VAT :D

[Oz]

Andy, id like a price for KW Variant 2 coilovers for the 2003 Toledo 1.8T if you please :)

[jetsetjimbo]

Jimbo: sorry mate :) With the 15% discount the front 22mm would be £123.25+VAT, the rear 25mm would be £157.25+VAT. Cruise is £149+VAT and a single remap is £375+VAT :D

Cheers - What would the fitting on the ARBs be?

[AndyHazza]

Oz: The Varient 2's work out at £829 including VAT

Jimbo: your lookin around 3 hours labour and four wheel alignment which would work out at £161.50+VAT with your 15% discount.

[jetsetjimbo]

Hi again Andy.

Can you tell me if either of these engine covers will fit the LCR as there's no mention of the fitment in the description on your website.

Forge Carbon Fibre Engine Cover and Carbonio Carbon Fibre Engine Cover.

Cheers

[AwesomeSarah]

Hi Mate
No the engine covers will not fit your car.
We are hoping that Carbonio will be looking at making something like this for your car , but we dont know when that will be
Sorry
Sarah

[jetsetjimbo]

Hi Mate
No the engine covers will not fit your car.
We are hoping that Carbonio will be looking at making something like this for your car , but we dont know when that will be
Sorry
Sarah

Thanks - I thought as much. Might be worth putting 'not for LCR' in the product descriptions.

[PhilW]

Andy, can you see if any of the Neuspeed bits fit the cap of the Ibiza washer tank. I'm sure i seen something like that in the catalogue.

[Ads_1.8-20vT]

Andy, how much is it for a forge fmic fitted to an ibiza cupra mk 3??

thanks
ADS

[Essex_Cupra]

Are you still doing the discount for the miltek downpipe and race cat or de-cat? Will it fit onto my supersprint exhaust?

[AndyHazza]

ADS: PM sent...

Essex: unfortunately we cant offer the discount on Milltek anymore.

Phil: i'll have to try and check against my car this week, wasnt in it all last week. You want the coolant top one or the screen wash?

[PhilW]

The one on top of the screen wash please andy. Thanks. :D

[Deebo]

Just spoke to someone on the phone and I'm a little confused having read your website. To clarify, could you please quote a 60K service inc Timing belt, tensioner, water pump etc for a Bora Sport 150 TDI (ARL engine).

[Essex_Cupra]

[QUOTE=Awesome_Andy]ADS: PM sent...

Essex: unfortunately we cant offer the discount on Milltek anymore.

Whats the price now then? Think i'd rather go with the race cat don't want the insurers saying my cars not road worthy because it hasn't got a cat!!



???????

[Essex_Cupra]

price?

[AndyHazza]

£358.20+VAT matey

[Essex_Cupra]

£358.20+VAT matey

Nice and cheap then!! £420.88!

Any discounts likely within the next 6months?

[PhilW]

Andy, did you check that cap for me?

[nogutsnoglory]

If the discount is still going, how much for a 4bar fpr + delivery?

Thanks

[AwesomeSarah]

Hi Mate
I am sorry , no the offer has finnished now.
£63.45 all in to your door.
Hope that helps
Sarah