View Full Version : Evo Shield
Bill,
Looking for a price for the Evo Shield and Longer Bolts. Im about to replace my Inlet Mani with a nice polished one, and been reading that this is a worthwhile investment. Would appreciate your comments
2005 LCR.
Cheers mate
jetsetjimbo
16-05-2006, 14:20
I'm looking at getting one of these if I have the manifold off so would be interested too.
Phil - Are you planning on doing it yourself?
I'm looking at getting one of these if I have the manifold off so would be interested too.
Phil - Are you planning on doing it yourself?
Err no, Unfortunatly i am mechanically disabled, i struggle with putting the washer fluid in, All my work is done at Votex in Congleton, they feel sorry for me and take pity.
james, clear your IN box, its full and cant accept any new messages
Scotty_b
16-05-2006, 14:31
Bolts etc come with the kit fella. I got mine from bill (think its £90) and BBT had it fitted within 30min!
Had the bracket that comes with the kit (extended version) powder coated but forgot it when i had it all done. Bill did say its not really needed tho.
Well worth it if your getting the mani swapped over as thats what i did with mine
I got the insulator on its own from Bill, and got bolts and gaskets from SEAT.
Gasket 028129717D (need two) £3.30
Bolts N10117403 (need eight) £0.44
The bolts look exactly like the standard ones, but are longer.
ibizacupra
16-05-2006, 15:18
I got the insulator on its own from Bill, and got bolts and gaskets from SEAT.
Gasket 028129717D (need two) £3.30
Bolts N10117403 (need eight) £0.44
The bolts look exactly like the standard ones, but are longer.
yep..
I have insulator gaskets only at the moment.. (not EVOshield ones) but made from the same type material... and much cheaper. £35 for the gasket plus delivery
Getting the EVOshield ones from the US is a pain, and works out expensive by the time you allow for carriage, duty and vat. I have a couple of largeport EVOshields in stock and a couple of VR6 ones.
regards
bill
Oh, ive just looked further into my parcel and noticed that Pete has included some new gaskets !
Bill the insulator gaskets you have, there not the power gaskets are they?
I heard they dont last very long and warp etc under the heat
ibizacupra
23-05-2006, 09:31
absolutely not Power Gaskets (which are total shite IMHO... nasty quality)
These are phenolic resin solid gaskets, same material type as EVOshield.
no warping or compression unlike Power Gaskets (PTFE)
flashbsd
24-05-2006, 10:27
do you do these for a mk3 ibiza cupra?
ibizacupra
24-05-2006, 14:04
gaskets only yes.
smallport is what I have for them and stock wise 2 largeport EVOshield kits
ibiza is smallport as is leon
Darth Tater
06-06-2006, 13:51
Bill
Just to say got my gasket this morn upon arriving at work
Thanks for prompt service again :clap:
ibizacupra
06-06-2006, 13:55
you're welcome
ibizacupra
09-06-2006, 11:47
Insulator Gasket - £35
Gaskets x 2 - £6.50
Bolts x 8 - £3.52
Total - £45.02 plus delivery.
(whilst stocks of smallport gaskets continue @ this low price - when they run out the next batch price is higher unfortunately, £35+vat next time)
regards
bill
Bill,
Sorry for sounding stupid but new to this, to order these parts do i ring your mob number that is displayed?
Thanks Sean
ibizacupra
11-06-2006, 14:47
yep.
:D
got gaskets and some bolts now for making full kits
bill
Received my insulator gasket and bolts today, cheers bill :)
Just one question, i only received 8 bolts but you need 10??
ibizacupra
13-06-2006, 17:59
8 bolts cos 2 are studs. leave them in.
Its not Powergasket tho m8.... :hide: Its a Phenolic insulator gasket.
ibizacupra
13-06-2006, 17:59
sold out for now on the gaskets.
8 bolts cos 2 are studs. leave them in.
Its not Powergasket tho m8.... :hide: Its a Phenolic insulator gasket.
That would be why then :whistle: :D
flashbsd
13-06-2006, 18:44
please post back when you have more avail matey :)
ibizacupra
13-06-2006, 22:46
That would be why then :whistle: :D
hehe, no worries
bezzaboy
15-06-2006, 20:41
hi bill just to say thanks got my insulator gaskets from you today top service.:clap:
flashbsd
16-06-2006, 08:23
you will have to show me matey at hunters ;) well up for stopping the inlet manifold getting silly'y hot!
ibizacupra
16-06-2006, 08:42
hi bill just to say thanks got my insulator gaskets from you today top service.:clap:
no problem...
run out for now tho :(
Bill do you have any of these in stock now? If not whats the eta on them?
Cheers.
ibizacupra
27-06-2006, 08:17
no eta and no stock of smallport yet, sorry
Ok no probs, thanks for the reply anyway. Keep me posted if you do get any idea of when theyre comin in.