Remote control Key programming

Try this:

- car is locked
- unlock with normal key manually at drivers doorlock
- IGN ON with normal key ... leave it there
- use NEW remote key to lock the car manually at drivers doorlock
- remove remote key from doorlock
- press "lock" at the NEW key, indicator lights will flash
- then hold the "unlock" für ~3 sec. and indicators will flash long and the doors should unlock
- coding procedure should be successfully finished.

Described in our board and confirmed several times ...

greets ... Klaus

or use vag-com

So what if you have de-locked your car?
I am unable to manually unlock/lock the car... this is why I am purchasing another remote key fob.

I have a brand new two button key fob plip, with uncut blade.

Would you know how much it will cost to programme the transponder so that it can operate the immobiliser.

Dealer price is extortionate. I live in Bradford, West Yorkshire.
Is anyone able to do it or can you recommend anyone that can.

Jacey Boy said:

Remote Control Erasing (1997 ON)
Procedure

1. Switch Ignition ON and leave the key in the ignition.
2. Mechanically lock the vehicle using the Drivers door using a second key.
3. Press the remote control unlock button 5 times in 1 second intervals. A short horn will sound.
4. Wait 6 seconds and press the unlock button once to activate memory erase.
5. Switch ignition OFF, all remotes are now tuned in.[/b]

Click to expand...

I just bought a new shape 2002 Seat Ibiza 1.2S the key fob wouldn't open the door or operate its LED.
I bought a new battery a CR2032.
After fitting this I nad the LED lighting up but still no C/L
Thanks to this info it now works a treat, thanks Jacey Boy

sorry wrong thread

Unable to Reprogramme my Remote Key

Hi ,

I have a 2004 Seat Altea 2.0 TDI Sport, my remote stopped working so i replaced the battery but since then it hasnt worked. Luckily i have a spare that im using.

i followed these intruction on here but its not worked....

- car is locked
- unlock with normal key manually at drivers doorlock
- IGN ON with normal key ... leave it there
- use NEW remote key to lock the car manually at drivers doorlock
- remove remote key from doorlock
- press "lock" at the NEW key, indicator lights will flash
- then hold the "unlock" for ~3 sec. and indicators will flash long and the doors should unlock
- coding procedure should be successfully finished.

When i hold the "unlock" for 3 seconds my indicators dont flash???

can anyone help?

First post on this forum.
joined mainly to say Thanks to Klaus for his simple instructions - just bought our leon and only had one remote so bought a second one and instructions i had didn't work. So did a quick search and found this thread and Klaus's instructions worked a treat now have two working remote fobs - now just need to either get transponder coded to immobiliser or if SEAT decide to charge two much will just swap over from spare key.

Will have a good look round forum now i've said thanks.

hi guys just wondering is there any other way to reprogramme the key fob as i only have 1 key ?? thanks

You need someone with VCDS for that mate.

I only have one key fob and its lost the code somehow...is there any way I can reprogram this myself....I also have another key but its just to open my doors just in case it has no code or anything...I would appreciate any help
Thanks

Does your second key start the car?

Unfortunately no
I just got it incase the main key gets locked in the car or anything like that so I can just open the car

Then as above, you need someone with VCDS to recode the remote to the car.

Mcgijohn did you have any success

mcgijohn said:

Hi ,

I have a 2004 Seat Altea 2.0 TDI Sport, my remote stopped working so i replaced the battery but since then it hasnt worked. Luckily i have a spare that im using.

i followed these intruction on here but its not worked....

- car is locked
- unlock with normal key manually at drivers doorlock
- IGN ON with normal key ... leave it there
- use NEW remote key to lock the car manually at drivers doorlock
- remove remote key from doorlock
- press "lock" at the NEW key, indicator lights will flash
- then hold the "unlock" for ~3 sec. and indicators will flash long and the doors should unlock
- coding procedure should be successfully finished.

When i hold the "unlock" for 3 seconds my indicators dont flash???

can anyone help?

Click to expand...

I have the same problem. When I hold unlock for 3 seconds the indicators don't flash. Anyone any suggestions. This is despite the indicators flashing once after the lock is pressed.

Ally-Pally said:

Unfortunately no
I just got it incase the main key gets locked in the car or anything like that so I can just open the car

Click to expand...

where abouts in West Midlands are you? i travel all over the country doing car keys

mcgijohn said:

Hi ,

I have a 2004 Seat Altea 2.0 TDI Sport, my remote stopped working so i replaced the battery but since then it hasnt worked. Luckily i have a spare that im using.

i followed these intruction on here but its not worked....

- car is locked
- unlock with normal key manually at drivers doorlock
- IGN ON with normal key ... leave it there
- use NEW remote key to lock the car manually at drivers doorlock
- remove remote key from doorlock
- press "lock" at the NEW key, indicator lights will flash
- then hold the "unlock" for ~3 sec. and indicators will flash long and the doors should unlock
- coding procedure should be successfully finished.

When i hold the "unlock" for 3 seconds my indicators dont flash???

can anyone help?

Click to expand...

where do you live? i can help with VCDS if you're local or somewhere near where i'm working as i travel all over

where is the best place in birmingham area to get a remote fob cut and programmed to the car I only have one remote fob with the car and no key code tag