Engine Management Light

Big Geoff

Guest
Seat Leon Mk1 year 2003 1.6L

I have a problem with the engine management light permanently on. Got the code PO402 Gas Recirculation Flow (EGR) Excessive Detected.

Is there a common fault or a guide on the forum to find the cause.

Help appreciated.
 
16786/P0402/001026 - Exhaust Gas Recirculation (EGR): Excessive Flow

Possible Symptoms
  • Malfunction Indicator Light (MIL) ON
  • Reduced Exhaust Gas Recirculation (EGR)
  • Reduced Power Output/Engine running rough
  • Increased Emissions
Possible Causes
  • Exhaust Gas Recirculation (EGR) Valve stuck open/leaking/faulty
  • Exhaust Gas Recirculation (EGR) System leaking/faulty
  • Wiring and/or Connector(s) from/to Exhaust Gas Recirculation (EGR) Valve faulty

Possible Solutions

  • Check/Clean Exhaust Gas Recirculation (EGR) System
  • Check/Replace Exhaust Gas Recirculation (EGR) Valve
  • Check Wiring and/or Connector(s) from/to Exhaust Gas Recirculation (EGR) Valve
 

Roohul

Active Member
Jun 22, 2010
179
0
Romford, Essex
A code P0402 most likely means one or more of the following has happened:

* The DPFE (differential pressure) sensor is faulty and needs to be replaced
* There is a blockage in the EGR (most likely carbon buildup)
* The EGR valve is faulty
* The EGR valve may not be opening due to a lack of vaccuum

Possible Solutions

With a P0402, it is common for people to replace the EGR valve, only to have the problem return. The most likely solution is to replace the DPFE sensor.

* Check the voltage at the DPFE sensor both at idle and when the EGR is open
* Replace the DPFE sensor
 
Chris Knott Insurance - Competitive quotes for forum members