intake Flow rate survey!!

vRSy · Jun 11, 2010

if any of you guys with ITG intakes have logged your cars could you please post up your intake mass air flow readings. *
Im trying to get a base comparison to see what they can achieve.

TFSI_mike===stage 2+ APR===k04 ===248g/s

gazbutS3=== stage 2+ REVO===k04 ITG===255g/s

vRSy===stage 1 shark performance===k03stock intake===200g/s

cupra_k1===stage 2+ REVO===k04 ITG===261g/s

vRSCarl===stage 2+ REVO===k03 Evoms===234g/s

KRL===Stage 1 REVO===K04 Twintake===249g/s

in fact i other guys could post uo your intake air mass in the above style with diferent intakes to get an idea what they are flowing. *(obviously all cars run differently but they should all be i the same regionish, for similar specced cars i the same regionish, for similar specced cars

Al · Jun 12, 2010

275g/s EVOMS

vRSy · Jun 12, 2010

USERNAME===STAGE/TUNER===TURBO AND INTAKE===G/S

TFSI_mike===stage 2+ APR===k04 ITG ===248g/s

gazbutS3=== stage 2+ REVO===k04 ITG===255g/s

vRSy===stage 1 shark performance===k03stock intake===200g/s

cupra_k1===stage 2+ REVO===k04 ITG===261g/s

vRSCarl===stage 2+ REVO===k03 Evoms===234g/s

KRL===Stage 1 REVO===K04 Twintake===249g/s

DJhorice===stage 2+ revo===k04 Evoms===275g/s

RodneyA · Jun 13, 2010

how the heck do you guys flow so much,even on the KO3?!...i'm flowing +-175g/s with Evoms.

although i am 1400m above sea level..does that count?

vRSy · Jun 13, 2010

RodneyA said:
how the heck do you guys flow so much,even on the KO3?!...i'm flowing +-175g/s with Evoms.

although i am 1400m above sea level..does that count?

hot air is less dense than cold air, therefore for every degree cooler the air is, the more mass of air that can be flowed through the intake.

vRSy · Jun 13, 2010

USERNAME===STAGE/TUNER===TURBO AND INTAKE===G/S

K04 Cars

TFSI_mike===stage 2+ APR===ITG===248g/s

gazbutS3=== stage 2+ REVO===ITG===255g/s

cupra_k1===stage 2+ REVO===ITG===261g/s

KRL===Stage 1 REVO===Twintake===249g/s

DJhorice===stage 2+ revo===Evoms===275g/s

Hedge===Stage 3 Superchips===stock intake===259g/s

DomT===Revo Stage 2+/Stage 2 DSG===Evoms===277g/s

PDT===Revo stg2+===Dbils intake with open cone inplace of airbox===256g/s

GTiJames== Revo Stage 2+ == ITG == 251.1g/s

K03 Cars

vRSCarl===stage 2+ REVO===Evoms===234g/s

vRSy===stage 1 shark performance===stock intake===200g/s

muckipup===stage 2+ shark performance test map===ITG===204g/s

RedRobin===Revo stage 2===Forge Twintake===???g/s [to be added]

any guys with twintakes and k03turbos care to add. doesnt even have to be an intake.. could be a mapped car with std airbox

Invisible · Jun 14, 2010

what kit is required to measure flow rates, i'd be interested to do mine

vRSy · Jun 14, 2010

Invisible said:
what kit is required to measure flow rates, i'd be interested to do mine

lap top and VCDS lead. definately a good purchase especially with REVO as you can log your car and play with your settings throughout the different seasons to optimise your car once you get the hang of your logging(which is pretty easy now i think), becuase your logs will show you all the adjustments and if they are safe and within limits

http://www.goapr.com/support/datalogging.php

cheungy · Aug 27, 2010

hmm I wonder if mine is broke...(MAF Sensor)

dave.c===Revo stage 2+ B9-T6-F5===Forge Twintake===180g/s (ko3)... haven't cleaned the MAF yet.

IbizaAlex · Aug 27, 2010

dave.c said:
hmm I wonder if mine is broke...(MAF Sensor)

dave.c===Revo stage 2+ B9-T6-F5===Forge Twintake===180g/s (ko3)... haven't cleaned the MAF yet.

Did you log on a really hot day? G/s will be much lower then.

cheungy · Aug 28, 2010

nope it was mild or just cold even...

yazmidani · Sep 30, 2010

dave.c said:
hmm I wonder if mine is broke...(MAF Sensor)

dave.c===Revo stage 2+ B9-T6-F5===Forge Twintake===180g/s (ko3)... haven't cleaned the MAF yet.

Well I've just done a quick run. . .

yazmidani===Stage 1 map===K & N Typhoon===191 (Ko3)

it does seem low compared to other results. . .should I be checking anything? Any other FR's got some results? :shrug:

Poverty · Feb 26, 2011

USERNAME===STAGE/TUNER===TURBO AND INTAKE===G/S

K04 Cars

TFSI_mike===stage 2+ APR===ITG===248g/s

gazbutS3=== stage 2+ REVO===ITG===255g/s

cupra_k1===stage 2+ REVO===ITG===261g/s

KRL===Stage 1 REVO===Twintake===249g/s

DJhorice===stage 2+ revo===Evoms===275g/s

Hedge===Stage 3 Superchips===stock intake===259g/s

DomT===Revo Stage 2+/Stage 2 DSG===Evoms===277g/s

PDT===Revo stg2+===Dbils intake with open cone inplace of airbox===256g/s

GTiJames== Revo Stage 2+ == ITG == 251.1g/s

K1 --- STOCK -----NEUSPEED ------187 g/s -----10 degrees ambient outside temp

K03 Cars

vRSCarl===stage 2+ REVO===Evoms===234g/s

vRSy===stage 1 shark performance===stock intake===200g/s

muckipup===stage 2+ shark performance test map===ITG===204g/s

RedRobin===Revo stage 2===Forge Twintake===???g/s [to be added]

any guys with twintakes and k03turbos care to add. doesnt even have to be an intake.. could be a mapped car with std airbox

cheungy · Feb 26, 2011

mine is still running 180-190 g/s according to vcd with the twintake on a "cold morning" with engine warmed up (shell 99 / revo settings @B8-T5-F9)

Poverty · Feb 26, 2011

So around 240hp going by your maf reading has it been on a dyno?

K1Shane · Feb 26, 2011

Poverty said:
USERNAME===STAGE/TUNER===TURBO AND INTAKE===G/S

K04 Cars

TFSI_mike===stage 2+ APR===ITG===248g/s

gazbutS3=== stage 2+ REVO===ITG===255g/s

cupra_k1===stage 2+ REVO===ITG===261g/s

KRL===Stage 1 REVO===Twintake===249g/s

DJhorice===stage 2+ revo===Evoms===275g/s

Hedge===Stage 3 Superchips===stock intake===259g/s

DomT===Revo Stage 2+/Stage 2 DSG===Evoms===277g/s

PDT===Revo stg2+===Dbils intake with open cone inplace of airbox===256g/s

GTiJames== Revo Stage 2+ == ITG == 251.1g/s

K1 --- STOCK -----NEUSPEED ------187 g/s -----10 degrees ambient outside temp

K03 Cars

vRSCarl===stage 2+ REVO===Evoms===234g/s

vRSy===stage 1 shark performance===stock intake===200g/s

muckipup===stage 2+ shark performance test map===ITG===204g/s

RedRobin===Revo stage 2===Forge Twintake===???g/s [to be added]

any guys with twintakes and k03turbos care to add. doesnt even have to be an intake.. could be a mapped car with std airbox

Lol and I was just about to add this myself! Can anyone tell me if the highlighted log is normal. We are currently in the middle of working out if the car is mapped or not??

cheungy · Feb 26, 2011

Poverty said:
So around 240hp going by your maf reading has it been on a dyno?

Nope not had chance to put the car on dyno yet...But yea it seems to run fine but always wondered if the MAF was reading the correct amount or if the data is accurate. When I get the chance I'll book it in with Revo HQ and let them check it all. (me thinks) pretty much have everything bolted on for the ko3 turbo about time I go ko4 soon :happy:

Poverty · Feb 27, 2011

Shane you maf reading suggests a power of 240hp, djhorace/al's maf reading would suggest a power of 340bhp for comparison.

Dave heard nothing but good things about revo hq especially regarding ben, I want to get down there at some point aswell!

Al · Feb 27, 2011

My standard FL LC has 201g/s with standard intake. Will log my car today Jason/Shane

LeonFR07DSG · Feb 27, 2011

i will try log my car soon, friend has vcds / lead and i have just fitted my BSH...

Will update when done!

Search

intake Flow rate survey!!

vRSy

Fabia vRS

Al

Active Member

vRSy

Fabia vRS

RodneyA

FR crazy

vRSy

Fabia vRS

vRSy

Fabia vRS

Invisible

vRSy

Fabia vRS

cheungy

IbizaAlex

AKS tuning

cheungy

yazmidani

Active Member

Poverty

Guest

cheungy

Poverty

Guest

K1Shane

336bhp 319 lb/ft

cheungy

Poverty

Guest

Al

Active Member

LeonFR07DSG

Active Member

Similar threads