Bluetooth language modification, please help

[Gamma_ed]

I have a dutch seat altea 2007 with a build in bluetooth, but the language is set to german. I do not like german and prefere english or dutch.

I have a vcds vagcom cable but i'm not very experienced with it, I understood I have to do a recode, but perhaps someone would like to help me to get through it step by step.

I did some investigation and have tried to google some information, hopefully some can tell me if this is all right underneath and perhaps I need more info to do it right?

I have found a recode scheme, not sure if its the right one, perhaps someone can tell me if this is the right one? Coding
00?0xxx: Communication Type
0 = Display-Data-Protocol (DDP)
1 = Operating and Display Protocol (BAP)
00x0?xx: Installation List
1 = Diagnostics via CAN
2 = Multi-Function Steering Wheel, Diagnostics via CAN
3 = Head Unit (e.g. RNS-E), Diagnostics via CAN
4 = Multi-Function Steering Wheel, Head Unit (e.g. RNS-E), Diagnostics via CAN
00x0x?x: Language (Voice Control)
0 = Voice Control OFF OR via external Device (e.g. RNS-E)
1 = German
2 = English (UK)
3 = French
4 = Italian
5 = Spanish
6 = Czech
7 = English (US)
8 = French (CA)
9 = Speaker dependent (Voice Commands inactive, Acoustic Name Selection active)
00x0xx?: Language (Display)
0 = No Display
1 = German
2 = English (UK)
3 = French
4 = Italian
5 = Spanish
6 = Czech
7 = English (US)
8 = French (CA)


1. Go to [Select]
2. afterwarts go to [17 - Instruments]
3. go to [Recode - 07] long coding
4. write the 5 figures down, so you would be able to go back

thank you