Exeo LED number plate lights - SEAT Cupra.net

Chappaz · 22-07-2012, 14:50

Has anyone found a replacement led light assembly or bulb that does not trigger the bulb out warning on the dash?

mcdonald · 22-07-2012, 15:01

See here: http://www.seatcupra.net/forums/show...92#post3932292

*Nath.* · 22-07-2012, 22:04

The best and easy way to mod your reg plate lights to LED's it to buy these clicky

And then scotch lock these clicky (you will need 2) onto the original wiring, pop a W5W bulb into each one and then poke it up inside the bumper where it can't be seen.

None of the bother of very hot resistors that may melt things and the w5w bulbs will be the perfect resistance to fool the ECU.

Results on a MK2 leon that has the same reg plate lights

All for about a tenner by the time you've bought 2 w5w bulbs

22-07-2012, 14:50	#1
Chappaz Newbie Join Date: Feb 2011 Posts: 1	Exeo LED number plate lights Has anyone found a replacement led light assembly or bulb that does not trigger the bulb out warning on the dash?

22-07-2012, 15:01	#2
mcdonald Full Member Join Date: Jun 2010 Location: Rotterdam, Netherlands Posts: 358	See here: http://www.seatcupra.net/forums/show...92#post3932292 __________________ EXEO 1.8T - 195BHP - black leather - bixenon - winter pack - 17 inch Dezent V Dark rims - Eibach springs - RS4 pedals - autom. boot - DRL/interior/taillights with LEDs

22-07-2012, 22:04	#3
Nath. The Gentlemans Express Join Date: Jan 2006 Location: EASTLEIGH, HAMPSHIRE Posts: 8,071	The best and easy way to mod your reg plate lights to LED's it to buy these clicky And then scotch lock these clicky (you will need 2) onto the original wiring, pop a W5W bulb into each one and then poke it up inside the bumper where it can't be seen. None of the bother of very hot resistors that may melt things and the w5w bulbs will be the perfect resistance to fool the ECU. Results on a MK2 leon that has the same reg plate lights All for about a tenner by the time you've bought 2 w5w bulbs Last edited by Nath.; 22-07-2012 at 22:21.

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

(View-All) Members who have read this thread : 37
Aaronsummers, asriel, bencook, BloodnutsTDI, carldavies13, CBRED, Chappaz, Craig D, cuernos, damomul, Dav87, Dave_, dday, DieselBerry, gcott, gethinwr93, JezzaS, jinidos, JoolsTech, julianat57, Julle77, Legohead, Loonyjuice, MasterKey, mcdonald, mrdo, Nath., p lancaster, Shep1994, ste8270, T21RNR, tomica, Troll, tytel, VRS_john, Webber, WULLIE