|
|||||||
| Ibiza Mk3 For 2000-2002 Specific Information. |
 |
|
|
Thread Tools | Rate Thread | Display Modes |
19-08-2012, 20:56
|
#1 |
|
Full Member
Join Date: Nov 2011
Location: west mids
Posts: 95
 |
Front wheels out at top and point in at bottom
Hi basically as u look at my wheel say like a clock 12 at top then 3-6-9 at bottom they point inwards and look pants do I need new tie rods or camber bolts as not clued up about geometry etc
|
|
|
|
19-08-2012, 21:25
|
#2 |
|
CARBON COPY!
Join Date: May 2008
Location: cambs
Posts: 2,418
|
Sounds like you need your camber adjusting ! Iirc you've got positive camber there
__________________
2002-present day it's the longest I've ever owned one car ! |
|
|
|
|
19-08-2012, 22:29
|
#3 |
|
Full Member
Join Date: Nov 2011
Location: west mids
Posts: 95
|
How can I adjust camber thanks Tom
|
|
|
|
|
19-08-2012, 22:29
|
#4 |
|
Rough around the edges
Join Date: Sep 2010
Location: Scotlanda
Posts: 5,843
|
Loosen the two bolts each side that hold the hub carrier and have fun lol. They're a pain in the rear
__________________
2001 Mk4 golf Estate (Leon in disguise), 1.9tdi, Bosio PP764 nozzles, 35mm drop. Custom tune by Nytrixtuning |
|
|
|
|
20-08-2012, 01:51
|
#5 |
|
Full Member
Join Date: Sep 2011
Location: Edinburgh-ish
Posts: 304
|
Take it to a specialist and have a laser wheel alignment done.
May also be worn bushes,balljoints, or possibly bent wishbones. |
|
|
|
|
| Bookmarks |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
(View-All)
Members who have read this thread : 36
|
|
| -=Rob=-, andycupra, black night01, Cupra137, cuprastoffs, Cupra_BigSpec, Dan Cupra R, denzil691, domin8or, EddyCupra, fionamac4, Ginge81990, J1 4RKL, JacketJ, Jaycupra51, JohnA-88, Jokerman261, Jonny chill, matt_s, mk1kid, ndbrgr, ntcupra, phil 9289, R4cup, Seatmann, Sinbad, slipery samon, steady_eddy, tom w, TomTomTom, tstrahonja, Tucker157, turboholic, waxhead, Zippyobrien |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Linear Mode
