Badger5



Go Back   SEAT Cupra.net - SEAT Forum » SEATCupra.net Sponsors - Trading area » Badger5

Badger5 Badger5 Ltd - Performance Tuning - Race Proven Products & Honest Advise....Forge,Ferodo,AP,Custom Code,REVO,H&R,Eibach,Vibratechnik,SPEC,Compmotive,DTA,Jenvey,Brembo brake kits,EBC,Koni,Neuspeed, and much much more...

Reply
 
Thread Tools Rate Thread Display Modes
Old 09-11-2017, 14:04   #1
Josh Holden
Newbie
 
Josh Holden's Avatar
 
Join Date: Dec 2015
Location: Warwickshire
Posts: 11
Josh Holden has 10 points
forging a BAM engine

hi guys,
My leon cupra r is currently running 281bhp/ 300 ftlb. I would like to know what parts id need for me to be able to forge it. i understand it already has forged pistons and crank? ie what type of rods? H/I beam? would like riffle drilled. should i change the rings ect and any other parts id need for the build. what turbo is best to go for also? i have had a look on here but cant seem to find anything? any help would be much appreciated. thank you

it currently has the supporting mods:

3" turbo back custom exhaust with decat
forge recirc valve
ram air filter and heat shield
AirTec Intercooler
larger sfs Turbo inlet pipe
N75 delete
N249 delete
oil catch can
Red audi r8 ignition coil pack upgrade
poly bushed lower engine mount
polly bushed strut top mounts
Rtech: stage 2 map with printout 281hp and 300ftlb.
Josh Holden is offline   Reply With Quote
Old 09-11-2017, 14:33   #2
ibizacupra
Jack-RIP my little Friend
 
ibizacupra's Avatar
 
Join Date: Jul 2001
Location: glos.uk
Posts: 31,847
ibizacupra has 50 points
our webshop shows some rods we have available.. Rifle drilled advised.
H or I beam more than adequate for your existing power.. What end goal do you have in mind?

New big end shells, optional on rings if your compression and leakdowns are good then leave alone.
usual other things, cam belt, water pump and advise check cyl head, as most often we see exhaust valve guide wear. Rebuild required. Often Supertech exhaust valves opted for at that point also.

We do a supply & fit rods package for £1690
Cyl head rebuild, refresh, skim, clean etc £595
Supertech inconel exhaust valves £304

much listed in our shop, or feel free to email/call the office (01453 822880)

www.badger5.biz

cheers
bill
__________________

BADGER 5 LTD: NEW WebShop >> www.badger5.biz
RACE PROVEN PRODUCTS & HONEST ADVICE:
Contact:01453 822880

Bespoke Big Turbo conversions,AEM WMI,Forge,Ferodo,AP Racing Brakes,Custom Mapping,REVO,H&R,Eibach,KW,Koni,Milltek,Jetex,Vibratechnik,Compomotive,DTA,Jenvey,Brembo brake kits,EBC,Koni,Neuspeed, and much much more...
http://www.badger5.co.uk
email me at:bill@badger5.co.uk

Last edited by ibizacupra; 09-11-2017 at 14:33.
ibizacupra is offline   Reply With Quote
Reply

Bookmarks

« Previous Thread | Next Thread »

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 

(View-All Members who have read this thread : 9
CatB1, erreesse, Fozzy84, ibizacupra, jok0212, Jonnyaye, Josh Holden, scotty1310, theoldboy
Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +1. The time now is 07:07.




Website © 2014 SEATCupra.net

Disclaimer: SEATCupra.net is not an official SEAT site and is not affiliated to SEAT in any way. Visit the Official SEAT Website.

SEATCupra.net are not directly responsible for information which maybe posted in this forum.
All content is viewed and used at your own risk. We do not warrant the accuracy or reliability of any of the information.
The views expressed herein are those of the individual contributors and not necessarily those of SEATCupra.net or SEAT
All trademarks and copyrights remain property of their respective owners.