Think your right Rich, bit pot luck realy.
Thanks mate
Think your right Rich, bit pot luck realy.
Thanks mate
Last edited:
I did the guide step by step, but twenty minutes later my car turned on the check engine light
17834 - EVAP Purge Valve (N80): Open Circuit
P1426 - 35-00 - -
17956 - Boost Pressure Regulation Valve (N75): Open Circuit
P1548 - 35-00 - -
17841 - Secondary Air Pump Relay (J299): Open Circuit
P1433 - 35-00 - -
17936 - Camshaft Timing Adj. Bank1 (N205): Open Circuit
P1528 - 35-00 - -
17840 - Secondary Air Injection Solenoid Valve (N112): Open Circuit
P1432 - 35-00 - -
17695 - Boost Pressure Control Valve (N249): Open Circuit
P1287 - 35-00 - -
can anybody help me????
after a few months of work
![[:@]](/forums/styles/seatcupra/oldforumsmileys/furious.gif "Furious [:@]")
all the problems were solvedbr0wny21
Guest
goodridge
Guest
mavras
Guest
Do you put th 3rd resistor into the plug for the SAI? I can only find 2 plugs on the rocker cover...
Another question I have a vac line coming off the actuator what do I do with this? The other end of it goes into a "T" piece from the valve on the left (N112?) of the rocker cover to the SAI pump?!
Noone
Guest
if you mean from the diverter (like BOV), then it goes to the intake manifold. there are only 2 on our mainfold top, one for the Fuel, one for the Vac / Diverter
farmer123
Guest
top of DV goes to intake manifold and if you have a boost gauge then put a T piece in the middle of this vac line.
Similar threads
