Changing REV DV - Guide

jc_boc

Missing the CUPRA R!
Jul 18, 2008
9,304
7
Desborough
Difficulty rating: 2 out of 5
I say 2 as I kept dropping the one bolt into the engine bay. So make sure you have one of them long magnet thingys LOL.

4 Bolts to undo, 3 hold the DV in place and the 4th is the bracket to secure it too. Took me all of 10 minutes.

Below is a picture of the old one I removed next to the revised dump valve.

IMAG0150.jpg


Here is the housing for the dump valve once it has been removed.

IMAG0151.jpg


here is the new DV replaced and fastened. The top left bolt is the one you need to do last as you need to pull the DV down to fasten the rear bolt.

IMAG0152.jpg
 

rikadoo

Guest
Do you have a picture of the top of the car en a arrow in which corner. Mine is broke also, i already got another revised model so i want to change this to and you say its easy :)
 

jc_boc

Missing the CUPRA R!
Jul 18, 2008
9,304
7
Desborough
Yeah I have no idea where it is located on the FR mate so sorry as mine is the cupra and it is on top at the front right hand side of the engine.
 
Progressive Parts, performance parts and tuning specialists