|
|||||||
| Leon Mk1 Use this forum for Leon specific topics, for 2000-2005 models only> |
![]() |
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
#1 |
|
Full Member
Join Date: Oct 2001
Location: Guadalajara, Jalisco, Mexico
Posts: 173
![]() |
manual boost controller - VAGCOM logs
installed a MBC from boostvalve.com
torque in the midrange increased noticeably power on the high end is lower per my VAGCOM logs cars has a weird surge down in power when acelerator is >= 60% but less than 100% when the boost goes over 12PSI it suddenly drops to about 8PSI this does not happen when acelerator is 100% or if i maintain the boost under 12 PSI , the boost goes up to 16PSI when flooring it , I wonder it the surge will go away if I increase the valve PSI level to about 15PSI , altough a little afraid f trying that as when flooring the boost may go over what the stock ECU considers safe and will drop into limp mode ... the boost drops to about 12 psi at higher RPM > 5000RPM car is stock (no chips) here is my best vagcom run vs. a run with the MBC valve
__________________
2002 Leon Sport 20VT |
|
|
|
|
|
#2 |
|
Full Member
Join Date: Oct 2001
Location: Guadalajara, Jalisco, Mexico
Posts: 173
![]() |
MBC boost log
VAGCOM block 115 with the valve
__________________
2002 Leon Sport 20VT |
|
|
|
|
|
#3 |
|
Full Member
Join Date: Oct 2001
Location: Guadalajara, Jalisco, Mexico
Posts: 173
![]() |
and .... boost without the MBC
notice how the boost doesn't drop near 6000 RPM and follows the requested boost much closer at RPMs > 4000
this log is from a year ago (10K miles ago)
__________________
2002 Leon Sport 20VT |
|
|
|
![]() |
| Bookmarks |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
(View-All)
Members who have read this thread : 14
|
|
| -pseudonymous-, Craigxr2i, DannyC87, DaNnY_LaD, EL, EZ Tutty, hamavemike, leedc5, LUPO GTI 20VT, Pabs, phunkymonkey, rsmith, S10EAT, samndavid55 |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|