*** INA - NEW 1.8T Breather Hoses *** - NOW GROUP BUY!! - SEAT Cupra.net

INA · 04-06-2009, 18:10

For all you valve cover buff fans who are tired of changing these pesky hoses.

Quote:

Originally Posted by Breather Hose, Valve Cover, Mk4 1.8t

Breather Hose, Valve Cover, Mk4 1.8t
PRICE - $35 USD
Fully reinforced silicone Mk4 1.8t breather hose to replace the crumbling rubber unit.

Specify if early (through 2002) or late (2003 on) application, note larger size of valve cover breather nipple on later cars. Early nipple 20mm, later 25mm.

Breather Hose, Mk4 1.8t, Block to Intake Manifold
PRICE - $13 USD
Reinforced silicone breather hose for Mk4 1.8t, runs from the lower block breather hose to the intake manifold, oem hose is unreinforced rubber and causes a common boost leak.

We are offering an Introductory price of:

79.99 USD SHIPPED TO THE UK for both breather hoses.

Pieces can be purchased individually.

Quote:

Originally Posted by PAYMENT INFORMATION

Accepting payment via Paypal & CC.

PAYPAL USERS:
If you are ready to place your order you can either send us a PM (CLICK HERE) or simply send payment to sales[AT]INAENGINEERING[DOT]COM via paypal.

In the title box put the following:
" Full Name - MKIV BREATHER HOSE KIT"

In the comment box put the following:
"Full Name
VORTEX SCREEN NAME
Address
Contact information"

If you are paying by CC please send us a PM for further details.

As always Thank you for the support!

JOIN THE GROUP BUY
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.

jaymd · 04-06-2009, 22:02

How much for 5 and 10 sets shipped to single address please.

INA · 05-06-2009, 05:29

Check your PM!

*Ric 2001* · 05-06-2009, 13:31

Which part numbers do they replace?

is it.... 06A 103 221 BH/AH and 06A 103 221 AF/BK.

*Willie* · 05-06-2009, 15:00

Interested in both, as Jaymd shipped to single address

jaymd · 05-06-2009, 15:45

Quote:

Originally Posted by Willie

Interested in both, as Jaymd shipped to single address

I'm thinking of sorting out a little group buy (if mods allow) and may do it between SCN and Briskoda to get 10 sets to keep cost down.

Works out a lot cheaper this way
287 USD shipped for 5
504 USD shipped for 10.

+ around £5 delivery from me to buyer.

This will exclude any VAT/customs charges.

INA · 05-06-2009, 16:57

Quote:

Originally Posted by jaymd

I'm thinking of sorting out a little group buy (if mods allow) and may do it between SCN and Briskoda to get 10 sets to keep cost down.

Works out a lot cheaper this way
287 USD shipped for 5
504 USD shipped for 10.

+ around £5 delivery from me to buyer.

This will exclude any VAT/customs charges.

Ye that seems fair mate.
Obviously you guys are saving on the shipping costs by doing Bulk.
So lets organise it!

**m0rk** · 05-06-2009, 17:02

Quote:

Originally Posted by jaymd

I'm thinking of sorting out a little group buy (if mods allow) and may do it between SCN and Briskoda to get 10 sets to keep cost down.

You're not permitted to run a GB. If INA want a GB, they can (and would) run it themselves in their section.

INA · 05-06-2009, 17:30

Quote:

Originally Posted by m0rk

You're not permitted to run a GB. If INA want a GB, they can (and would) run it themselves in their section.

I have it set up for the lads now.

**m0rk** · 05-06-2009, 17:32

You are mental if you send money to an unknown third party on the internet

I've seen it go wrong too many times in the past to suggest that making payment & delivery to 'a guy' who will then distribute the products when he receives them.

That's no finger pointing at the guy who wants to set it up, but it's exactly why we don't allow "indirect" GB's

INA · 05-06-2009, 17:40

Quote:

Originally Posted by m0rk

You are mental if you send money to an unknown third party on the internet

I've seen it go wrong too many times in the past to suggest that making payment & delivery to 'a guy' who will then distribute the products when he receives them.

That's no finger pointing at the guy who wants to set it up, but it's exactly why we don't allow "indirect" GB's

Totally understood mate,
that is why I will probably send them to Jamiebennett ,Robdon or Willie as they have done excellent jobs in the past of sorting out GB's like this.
Realistically there is a minimum shipping charge of 37-48 USD from US to the UK and at that point the weight is pretty much minimal so 1 or 20 silicone hoses will fit fine in a standard box.

*cupra-neil* · 05-06-2009, 17:45

What hoses are these to replace?

jaymd · 05-06-2009, 18:18

I did say in my post "if mods allow" and would have got people to pay direct to INA for the goods then once the goods have arrived got final payment off people for postage and customs charges.I will probably just do a separate group buy on briskoda if the goods can't be shipped to me as it would incurr more costs.I will see how this thread goes.

*Willie* · 05-06-2009, 20:52

Jaymd was part of the initial GB for the engine mounts.

Trust is a great thing and it's not a great deal of money. As said above this is how we did the engine mount one and everything went well

INA · 06-06-2009, 15:45

Quote:

Originally Posted by Willie

Jaymd was part of the initial GB for the engine mounts.

Trust is a great thing and it's not a great deal of money. As said above this is how we did the engine mount one and everything went well

Right I just check it and he was part of the original GB.Sorry about that jaymd....

SCN needs to put in an application where I can see your real names.Makes identifying a hell of alot easier.

Quote:

Originally Posted by cupra-neil

What hoses are these to replace?

Quote:

Originally Posted by Ric 2001

Which part numbers do they replace?

is it.... 06A 103 221 BH/AH and 06A 103 221 AF/BK.

Not sure Ric as the latter is not showing up in my ETKA?
Whatever the case they replace the rubber hose coming from the valve cover and oil filter housing.

jaymd · 06-06-2009, 16:24

06A103221BK is located next to the dipstick under the metal bracket and connects to the PVC system.

06A103221BH is the 3 way pipe on the end of the rocker cover.

IIRC AH and AF were the ones part numbers which have been superseded.

I have replaced both these pipes and the dealer cost is around £42 for both including VAT.

All of the above relates to AUQ engine code.

INA · 06-06-2009, 17:00

Quote:

Originally Posted by jaymd

06A103221BK is located next to the dipstick under the metal bracket and connects to the PVC system.

06A103221BH is the 3 way pipe on the end of the rocker cover.

IIRC AH and AF were the ones part numbers which have been superseded.

I have replaced both these pipes and the dealer cost is around £42 for both including VAT.

All of the above relates to AUQ engine code.

In that case the the $35 unit is the 06A103221BH on the end of the rocker cover and the $13 unit is the one under the intake manifold 06A103221BK.

*Ric 2001* · 08-06-2009, 13:40

Thats the problem the last to letter on the part number are different to the ones I specified (not got etka to hand). So I'm not 100% sure if they'd fit a mk4 ibiza

INA · 08-06-2009, 19:21

Quote:

Originally Posted by Ric 2001

Thats the problem the last to letter on the part number are different to the ones I specified (not got etka to hand). So I'm not 100% sure if they'd fit a mk4 ibiza

Whats the outer diameter of the nipple on your rocker cover?

04-06-2009, 22:02	#2
jaymd Full Member Join Date: Jun 2006 Location: Macclesfield - Cheshire Posts: 144	How much for 5 and 10 sets shipped to single address please. __________________ Octavia vRS,Milltek 2.5" turbo backexhaust,Forge fmic,Forge Elimimator DV,Forge T.I.P. and Boost Hoses,Neuspeed 28MM Rear ARB,R32 23mm Front ARB,Green Cotton Air Fliter,Powerflex Dogbone/ARB Bushes.

05-06-2009, 05:29	#3
INA Garrett Super STAR! Join Date: Dec 2007 Posts: 2,349	Check your PM! __________________ INA Engineering Inc. Email US \| Facebook US \| Call US : 001.613.867.8667 INA CNC'ed Parts \| 034 Products \| Mahle PowerPak \| Ferrea Valvetrain \| ARP Hardware \| Mocal Oil control \| DBW Throttle Body Upgrades

05-06-2009, 13:31	#4
Ric 2001 Need an ID-ten-T form Join Date: Aug 2005 Location: Shaw/Royton (Depends On Where I Am In The House!) Posts: 2,071	Which part numbers do they replace? is it.... 06A 103 221 BH/AH and 06A 103 221 AF/BK. __________________ Platinum Mk4 Cupra 1.8 20vt MY05 - Gone, But Not Forgotten Last edited by Ric 2001; 05-06-2009 at 13:33.

05-06-2009, 15:00	#5
Willie LCR Track car Join Date: Aug 2004 Location: Sunny Scotland Posts: 9,679	Interested in both, as Jaymd shipped to single address __________________ My E46 M3 CSL Slayer

05-06-2009, 17:32	#10
m0rk sarcasm comes free Join Date: May 2001 Location: Horndean, Hants Posts: 29,426	You are mental if you send money to an unknown third party on the internet I've seen it go wrong too many times in the past to suggest that making payment & delivery to 'a guy' who will then distribute the products when he receives them. That's no finger pointing at the guy who wants to set it up, but it's exactly why we don't allow "indirect" GB's __________________ m0rksport fleet Skoda Octavia vRS Leon Copa

05-06-2009, 17:45	#12
cupra-neil Gone but not forgotten Join Date: Aug 2003 Location: liphook hampshire Posts: 557	What hoses are these to replace? __________________ Saving for a respray

05-06-2009, 18:18	#13
jaymd Full Member Join Date: Jun 2006 Location: Macclesfield - Cheshire Posts: 144	I did say in my post "if mods allow" and would have got people to pay direct to INA for the goods then once the goods have arrived got final payment off people for postage and customs charges.I will probably just do a separate group buy on briskoda if the goods can't be shipped to me as it would incurr more costs.I will see how this thread goes. __________________ Octavia vRS,Milltek 2.5" turbo backexhaust,Forge fmic,Forge Elimimator DV,Forge T.I.P. and Boost Hoses,Neuspeed 28MM Rear ARB,R32 23mm Front ARB,Green Cotton Air Fliter,Powerflex Dogbone/ARB Bushes.

05-06-2009, 20:52	#14
Willie LCR Track car Join Date: Aug 2004 Location: Sunny Scotland Posts: 9,679	Jaymd was part of the initial GB for the engine mounts. Trust is a great thing and it's not a great deal of money. As said above this is how we did the engine mount one and everything went well __________________ My E46 M3 CSL Slayer

06-06-2009, 16:24	#16
jaymd Full Member Join Date: Jun 2006 Location: Macclesfield - Cheshire Posts: 144	06A103221BK is located next to the dipstick under the metal bracket and connects to the PVC system. 06A103221BH is the 3 way pipe on the end of the rocker cover. IIRC AH and AF were the ones part numbers which have been superseded. I have replaced both these pipes and the dealer cost is around £42 for both including VAT. All of the above relates to AUQ engine code. __________________ Octavia vRS,Milltek 2.5" turbo backexhaust,Forge fmic,Forge Elimimator DV,Forge T.I.P. and Boost Hoses,Neuspeed 28MM Rear ARB,R32 23mm Front ARB,Green Cotton Air Fliter,Powerflex Dogbone/ARB Bushes.

08-06-2009, 13:40	#18
Ric 2001 Need an ID-ten-T form Join Date: Aug 2005 Location: Shaw/Royton (Depends On Where I Am In The House!) Posts: 2,071	Thats the problem the last to letter on the part number are different to the ones I specified (not got etka to hand). So I'm not 100% sure if they'd fit a mk4 ibiza __________________ Platinum Mk4 Cupra 1.8 20vt MY05 - Gone, But Not Forgotten

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
reducing capacity of 1.8T	RobT	Turbo Forum	76	02-04-2013 18:42
Awesome 1.8T Breather Hoses!	AwesomeAl	Awesome GTI	15	10-02-2010 09:27
Leon 1M 1.8T Forge Front Mount Intercoolers Down In Price!	Damian @ DPM	DPM Performance	12	28-09-2009 12:14
*INA catch can kit - VW / AUDI / SEAT / SKODA 1.8t *	INA	INA Engineering	19	29-06-2009 18:12
Breather Pipes Made of Chocolate. What is a Good Replacement For This	skunnie26	Leon Mk1	3	19-05-2009 17:12