DIAMONDBRITE Question. - SEAT Cupra.net

qed296 · 31-07-2009, 20:05

Hi folks

Having a sort through the stack of paperwork with my new cupra r (54 plate) and found it had diamondbrite from new (£200). The question is.... i use Megs a s a rule (wash/quick detailer/micro cloth) but having tryed a small area it seems to be leaving light swirl marks....whats the best product to use to maintain the deep shine/protection...does this polish/protection have any aftermarket outlets..

Many thanks

markocupra · 01-08-2009, 10:00

Hi mate
Up until christmas i worked for mazda, we sold this stuff as an add on. To be honest the stuff is pretty rubbish. It's never applied correctly by the dealers, in my experience anyway.
We charged £299 for it, but it can be got off ebay for a couple of quid and you will make a better job of putting it on, but not being a professional valeter it will have no guarantee anyway.
If you were serious that you wanted to use diamondbrite, gard x, sotherbys etc then once its on you get stuff called conserver which is mean't to top it up.
But if you want my opinion, don't waste you time and money, get a good shampoo, polish and a wax.
Sorry to go on!

qed296 · 01-08-2009, 17:42

Ok,thanks for that. Is there anyway of removing it?? or is it a case of over polishing/waxing ?? As i said it seems to leave light swirl marks..

Thanks

31-07-2009, 20:05	#1
qed296 Leaving it standard Join Date: Jul 2009 Location: Leon Cupra R 225 Posts: 99	DIAMONDBRITE Question. Hi folks Having a sort through the stack of paperwork with my new cupra r (54 plate) and found it had diamondbrite from new (£200). The question is.... i use Megs a s a rule (wash/quick detailer/micro cloth) but having tryed a small area it seems to be leaving light swirl marks....whats the best product to use to maintain the deep shine/protection...does this polish/protection have any aftermarket outlets.. Many thanks

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Quick question on bolt size	Reuvers	Ibiza Mk3	3	26-09-2008 11:09
interior lights question	wise_crak	Ibiza Mk3	9	21-09-2008 09:09
Armrest fitting question (gap)	magicoi	Leon Mk1	10	28-04-2008 19:33
Leon/Toledo's Angel Light with HIDs Question	xnox202	Leon Mk1	9	18-04-2008 21:41
Diamondbrite jewel ultra question	Hudson	Car Care and Detailing	18	06-06-2007 20:21

01-08-2009, 10:00	#2
markocupra Newbie Join Date: Mar 2009 Posts: 7	Hi mate Up until christmas i worked for mazda, we sold this stuff as an add on. To be honest the stuff is pretty rubbish. It's never applied correctly by the dealers, in my experience anyway. We charged £299 for it, but it can be got off ebay for a couple of quid and you will make a better job of putting it on, but not being a professional valeter it will have no guarantee anyway. If you were serious that you wanted to use diamondbrite, gard x, sotherbys etc then once its on you get stuff called conserver which is mean't to top it up. But if you want my opinion, don't waste you time and money, get a good shampoo, polish and a wax. Sorry to go on!

01-08-2009, 17:42	#3
qed296 Leaving it standard Join Date: Jul 2009 Location: Leon Cupra R 225 Posts: 99	Ok,thanks for that. Is there anyway of removing it?? or is it a case of over polishing/waxing ?? As i said it seems to leave light swirl marks.. Thanks

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

(View-All) Members who have read this thread : 28
adam cupra 20vt, alx_chung, ayeaye, bartsimmo, Becks, chris_200120vt, CupraSport, dav3, dazjb69, DScape, GavinM, GregLCR04, IanG, JMS, kewlers, krisbutler02, markocupra, mhill, Miss Hamilton, norgax, owenwestby1, plums, qed296, Richy88, wild willy, wmffra, Y8 NLD, YIN