Andrewcupra TDI's ride

thought i should make a a thread before i forget again
some pictures from advert i bought






and a picture of when i collected and sent off for a full valet


Engine:


Carbonio Cold Air Intake ( i did have a green panel filter but swapped with mike FR+ )
Unsure of a remap or chip , was like it when i bought it
Miltek Decat resonated system with twin tailpipe
Bonnet seal added
ALSO have an EGR delete pipe , some sfs hoses and aGreddy oil catch can to fit too

Suspension and brakes:

Weitec Ultra GT -30mm kit
STD size brakes upgraded disks to drilled and grooved
Upper & Lower S3 Strut braces

Exterior:

Debaged leaving the Cupra & flag White Monster Sticker opposite
HIDS4U 6000k kit & matching sidelights
Phillips silvertec indicator bulbs
Rear Fabia wiper
Front Aero wipers
De locked
Pressed metal plates
Interior:

AutoGauge Boost & Oil temp gauges (still to be plumbed in )
Nomad double Pillar pod
LCR Leather Gaitor (red stiching )
Genuine Mat Set
MKIV Sunglasses Holder
Fuse 38 relocated
Genuine Undershelf tray & Net
L.e.d's fitted in lights , and doors
W8 light fitted
Genuine Seat Mats


ICE:

STD


To do list:

Pressed plates - DONE
Window tinting
Bigger Brakes R32's im thinking
Hybrid later on down the line
Remap
AMG wheels or something else unusual
Hard piping
EGR delete (which i have and not fitted
S3 engine bay covers (washer bottle expansion etc )
Rear strutbrace
ARB's
LCR splitter

am thinking of painting my centre console surrounding parts the flash red colour unsure yet tho

cant really think of anything else

heres the pictures of the mods done

Fabia rear wiper

Had a RR day sunday the 6th dec @ Gotboost llandow

i was quite happy with the results

Run no 1
Wheels 161.5bhp @3,982 rpm
Engine 198.7bhp @ 4,007 rpm
Max torque 293.0 lbft @3,095

Run no2
Wheels 160.4bhp @3,921 rpm
Engine 193.5bhp @3,936 rpm
Max torque 288.8 ibft@2,842 rpm

Will try get the graph uploaded

heres the video




http://s657.photobucket.com/albums/uu291/mw51vtr/seat stuff/?action=view&current=06122009012.flv

was quite quiet and didnt smoke at all not like before and not even like some of the petrol cars there !!

well its not 100% rite

still not starting when hot all the time so am working through it really

car performs ok just that restart

its got to be fueling

im going to take it back to craig ant gotboost and get a live logging session i think as the graphs dips half way through then creeps up before tailing off ??

also get some logging done an the various sensors

cheers

ye need to get it scanned an posted up for someone to look at it .

as saif it goes up down then back up a little before going back down , so something not rite there , lack of fueling or something

but sayin gthat even the old RR from 2005 done it ??

6000k hids

heres the pics i have of the hids

miltek & delock pics

pics of the miltek my camera was goosed makes it look blured /smoked





delock




rear to match colour

ye i know

mark was my old sony erricson with a cracked lense

shoul dborrow my mother slr thingy



just taken delivery of my weitecs

mark shame theres no school nite could have done up there

mite see if my uncle got some spare time one night

will get some piccies (better ones )

cheers

nah will either go down my parents or give it to markwales
cant wait to see either damien like a kid on xmas day , ur got it unwrapped but cant play with it

took delivery of these earlier








and heres a pic as standard will try and get same shots when done

well their not that high , ive caught the bumber a few times and the undertray on uneven lanes from work hence why i didnt want that low 20 odd mm should be fine hopefully noticable

ok rather than make duplicate posts

anyone care to comment on my 2 posts i have

vagcom mirror adjustments
http://www.seatcupra.net/forums/showthread.php?t=247337

and about halfrauds pressure washers
http://www.seatcupra.net/forums/showthread.php?t=247187

have posted them in the right places just either noone looks or dont want to comment

cheers

cant wait to get the suspension on

bought new OEM rear bumpstops and front topmounts and the bearings

can then look at actually bolting my upper S3 strutbrace then

Gearknob & Gaitor

bit of an update

still waiting for my suspension and top mounts to be fitted

also want to show my bargain at halfrauds the other day

Most people do the Seat sport gearknob

but for this price i couldnt leave it there , while i worked there these were over £60odd quid even now they go mid £50's






while im changing it , i got a red stiched gear gaitor to fit too

will get pics of them fitted

Anyone painted their LCR splitters , or is it no point


Also forgot to mention i ordered some carbon vinyl to tinker with the S badges


Also finally gave my Graphs to mark to scan in for me so will get em uploaded soon !!!

i know

theres a few dotted about phone em up and put to one side

you had the trade part i still have other

item code 672717

how my invertor looking ??

any ever taken their b pillar stickers off ???