Bigger washer bottle - SEAT Cupra.net

Studog · 02-02-2011, 18:39

Hi there, can anyone tell me if they have fitted the bigger washer bottle to there mk4, just want to make sure its a straight swap before i buy it, its the one for mk4 with headlightwashers. Cheers in advance.

Studog · 04-02-2011, 23:11

Has nobody fitted the bigger windscreen washer bottle

.

*Crafoo* · 04-02-2011, 23:45

Should answer your question fella

http://www.seatcupra.net/forums/show...er+wash+bottle

*DEAN0* · 05-02-2011, 11:09

Quote:

Originally Posted by Studog

Has nobody fitted the bigger windscreen washer bottle

.

Yep - as stated it's the bottle from an ibiza (or skoda fabia) with headlight washers.

Bottle is a straight fit but takes some jiggling to get it in place.

You will also need to find two bungs to block the holes not used by the headlight washer motor and the level sensor.

*beezanick* · 05-02-2011, 21:22

Straight swap, just need to get some grommets to block of the extra holes. I used araldite to glue them in to make sure they are watertight.

You may have some problems getting the old bottle bolts undone as they may have rusted in badly by now.

02-02-2011, 18:39	#1
Studog Full Member Join Date: Aug 2010 Location: Belfast, NI Posts: 44	Bigger washer bottle Hi there, can anyone tell me if they have fitted the bigger washer bottle to there mk4, just want to make sure its a straight swap before i buy it, its the one for mk4 with headlightwashers. Cheers in advance.

04-02-2011, 23:11	#2
Studog Full Member Join Date: Aug 2010 Location: Belfast, NI Posts: 44	Has nobody fitted the bigger windscreen washer bottle.

04-02-2011, 23:45	#3
Crafoo Crazy Fool! Join Date: Apr 2005 Location: Your mums house Posts: 1,693	Should answer your question fella http://www.seatcupra.net/forums/show...er+wash+bottle __________________ MK4 Ibiza FR 20VT - Gone! Goodbye friend Speed Blue Mk2 LCR is here Readers Ride thread

05-02-2011, 21:22	#5
beezanick Senior Member Join Date: Mar 2008 Location: Wiltshire / Bristol Posts: 693	Straight swap, just need to get some grommets to block of the extra holes. I used araldite to glue them in to make sure they are watertight. You may have some problems getting the old bottle bolts undone as they may have rusted in badly by now. __________________ Mk4 52 plate 130TDi sport - in BLACK

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

(View-All) Members who have read this thread : 35
beezanick, Benl172, Blanco92, CGD217, chrisRibiza, Crafoo, craig2305, cupra.al, dan666, darkhorse, DEAN0, Dopsonj, Excathedra, FR_MATT, gregy_reynolds, Guinness, higgi, jamie_, John11367, JR_130, ManOnTheMoor, mark_eisner, Mysterious Gary, NetworkMan, ozone1980, pete_266, plr1980, Red ibiza, rf860, Slippery_Stu, Studog, thePHILosipher, tills7, Wash It!, zMuDa