intercooler - SEAT Cupra.net

tucker999 · 09-10-2011, 17:56

hi can you help me again!? Which is the biggest forge universal intercooler i can fit that suits a leon cupra 180. And also do you do a basic piping kit or is it all just pick what you need ? gareth

john@forge · 11-10-2011, 10:12

The problem with the leon intercooler is that its a dual pass intercooler (both inlet and outlet on the same side)

We do not do a pipe run seperatly , when you add up all the costs and the time to fit we recomend buying our complete kit.

Here - http://www.forgemotorsport.co.uk/con...duct=FMSEAFMIC

Thanks

tucker999 · 11-10-2011, 11:22

i was going to use a normal intercooler not dual pass. apparently a few companies prefer the straight through approach, not creating a u-bend like on the dual pass. and i thought this would be the cheaper option. thanks anyway

Kris@Forge · 13-10-2011, 14:14

If you get some measurements of the space you have behind your bumper.

I will then see what intercooler will fit.

Kris

tucker999 · 13-10-2011, 14:49

thanks mate, hopefully will get a chance at the weekend

Kris@Forge · 17-10-2011, 09:26

No probs let me know

09-10-2011, 17:56	#1
tucker999 Full Member Join Date: Dec 2008 Posts: 43	intercooler hi can you help me again!? Which is the biggest forge universal intercooler i can fit that suits a leon cupra 180. And also do you do a basic piping kit or is it all just pick what you need ? gareth

11-10-2011, 10:12	#2
john@forge Full Member Join Date: Apr 2008 Posts: 281	The problem with the leon intercooler is that its a dual pass intercooler (both inlet and outlet on the same side) We do not do a pipe run seperatly , when you add up all the costs and the time to fit we recomend buying our complete kit. Here - http://www.forgemotorsport.co.uk/con...duct=FMSEAFMIC Thanks __________________

13-10-2011, 14:14	#4
Kris@Forge Forge Motorsport Join Date: Nov 2009 Location: Gloucester Posts: 1,222	If you get some measurements of the space you have behind your bumper. I will then see what intercooler will fit. Kris __________________

17-10-2011, 09:26	#6
Kris@Forge Forge Motorsport Join Date: Nov 2009 Location: Gloucester Posts: 1,222	No probs let me know __________________

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

11-10-2011, 11:22	#3
tucker999 Full Member Join Date: Dec 2008 Posts: 43	i was going to use a normal intercooler not dual pass. apparently a few companies prefer the straight through approach, not creating a u-bend like on the dual pass. and i thought this would be the cheaper option. thanks anyway

13-10-2011, 14:49	#5
tucker999 Full Member Join Date: Dec 2008 Posts: 43	thanks mate, hopefully will get a chance at the weekend

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)