Clutch for Ibiza Cupra 2000

[Romano]

Hi
I would like to ask you for a litlle help for cupra owner from Poland
I have to buy clutch set with lightened flywheel
I know that some of you can give me all details (numbers : plate diameter 280 mm??)

Will it fit: http://www.adrenalinmotorsport.com/ ADR-CLU-20VW-001
STAGE 1
Adrenalin's stage 1 Clutch kit was produced for a high performance streetcar in mind. The stock flywheel is replaced with a lightened OEM unit that is half the weight. A dual fiber clutch is used for its ability to feel like stock but with the higher friction of a race clutch. Recommended 250HP maximum.
Please give me some info

[penaaz]

Yes, it will fit. Vw golf 1.8T has same tranny as Ibiza 20vt. I Think
that the plate diameter is 228mm, oem is 220mm. But if you ask from me, I would go to Stage 2.

[Romano]

Thanks

could you tell also how much pounds did you spend on clutch from Autotech and could you write me an part number

Did you feel huge diference after clutch chang.

[penaaz]

http://www.autotech.com/flywheel.htm
10.105.150709K Stage 2 -
with SACHS Power Clutch
$699.95

It was expensive, but it's great! clutchpedal is softer, revs much better, doesn't slip!

[penaaz]

some guys at usa says that autotech clutch is shit (www.vwvortex.com), doesn't hold much torque. They say adrenalins clutch is much better. just btw..

http://forums.vwvortex.com/zerothread?id=252178

[Fast Ibiza]

Originally posted by penaaz
some guys at usa says that autotech clutch is shit (www.vwvortex.com), doesn't hold much torque. They say adrenalins clutch is much better. just btw..

http://forums.vwvortex.com/zerothread?id=252178

Hi,
I own a 20VT, I got a turbo kit for from ATP, and I realy would like to know if I have the same clutch as the Golf GTI????

I know that ATP sell a Flywhell,lightweiht from autotech 228mm and a cluthmaster stage III pressure plate(kevlar disk), will this kit fit on my Ibiza 2000, If you have any info on this could you write me..... because I think I´ll need a new clutch for the 300hp that ATP kit is giving me.

Do you have a frount mount intercooler??
How many hp are you runing?

[penaaz]

I Think that all golf 1.8T clutches will fit because seat and golf has same trannys (asked from my local seat/golf dealer).
autotech 228mm clutchkit, went in like a dream. No problems at all. If you are going to ATP.s turbo kit, go for stage3
Yes, I have fmic. (Can email some pics if you want)
Flywheel power:
Horsepower: 236hv / 4970 RPM
Torque: 400nm / 3587 RPM

when you are going to install your atp kit? can you take
some pictures about your project and put online, it would be
really interesting!

[Fast Ibiza]

Yes I but the stage III non ballbearing..... with a custum made intercooler 23.5" x 7.12" x 3".
I think i´ll go for the ATP Flywhell,lightweiht from autotech 228mm and a cluthmaster stage III pressure plate(kevlar dics) is cost a bout 750$, I think is alot but people say that is the best for my turbo kit.
If you can please send me pics of your frount mont intercooler, and I will let you konw when I get my turbo kit so I can post son pic of it.
thx
Regards
German Ruiz
---------------------
Upsolute chip(k04)
2,5" custum exaust cat back
Turbo XS Blow off( in DV mode)
KKK K04 turbo
Autometer gauges (boost, are/fuel and EGT)
Galfer Tuning line brake kit with pads
Full suspension....
COOMIN SOON......300HP
ATP stage III
FMIC