Badger5



Go Back   SEAT Cupra.net - SEAT Forum » SEAT Model Specific Discussion Forum includes Members Projects » Readers Rides

Readers Rides Show us your ongoing projects / work in progress / pride and joy.

Reply
 
Thread Tools Rating: Thread Rating: 81 votes, 5.00 average. Display Modes
Old 09-02-2014, 14:29   #1
Gagwithgaffer
Full Member
 
Gagwithgaffer's Avatar
 
Join Date: May 2013
Location: North Yorkshire
Posts: 74
Gagwithgaffer has 10 points
Quattro Cupra R Mk2 Project

Gentlemen

Thought it was about time I do a cupra.net write up for my Quattro MK2 Cupra R Project.

For a more detailed version including all other mods please find us at www.remappers.com

So I bought the Cupra back in May 2013, Typically I never thought I would go this far with the modifications but the hunger for more power soon got the better of me!

Cupra Kung Fu was one of the last MK2s off the production line back in late 2012. I'm a proud owner of my Leon and I'm just glad I got the chance to get one before they all got snapped up. When I started looking around, there were only 3 left in the country on sale through SEAT dealerships with sub 5k miles on the clock. This Cupra had never left SEAT ownership as it was used by one of their branch managers for 6 months, it was in show room condition without a scratch, dent or scuff. Was very excited when I picked it up...

Within three days of driving, I decided it simply wasn't fast enough!

So I contacted the REVO team and asked them what could be done to pep it up. They advised I give Andy a call from Autotechnica and he would sort me out with some modification goodies. Within just 8 months we have gone to a REVO Stage 3 big turbo conversion with a full engine re-build and now we're ripping it apart for an AWD conversion! You could say I'm a little impatient and a bit nuts, but this has become a major project for us and we have plans to turn this Cupra R into something rather special.


The Project Team

From day one the guys at Autotechnica have been absolutely brilliant. Andy and his men have served many years working for Volkswagen Audi Group main dealerships as master technicians and they really know their stuff! From my initial enquiry through to the completion of REVO Stage 3, these guys have been really good to work with. They are all down to earth people with an honest and professional approach. They have always shown some real enthusiasm towards the car and their quality of work is something else!



94 Calvert Lane, Hull, HU4 6BJ Tel 01482 353369

I would highly recommend Autotechnica to anyone who wants to take their car to the next level. They are the only Revo Technik authorised dealers in the area and will take on any project from a minor service to a full-blown engine rebuild. Their pricing structure is very competitive and will put any main dealership to shame!


Modifications

Up to now we have concentrated our efforts on the engine and handling upgrades alone, the exterior of the Cupra has been left untouched and we plan to keep things simple. We prefer the element of surprise, a wolf in sheeps clothing! the only mods inside the car were upgrading the speakers for some quality Alpines, they run off the original head unit for the time being.

From a standard car we went straight to Stage 2+ then soon after we carried out some handling upgrades including front & rear sway bars and a full coilover kit, then before XMAS we went to Stage 3 and did an engine re-build. We now have the Cupra back in the garage for the the AWD conversion.

We will be taking the car to some shows this summer so we wanted to make a start on the conversion in good time so we're well prepared for the new season. We are currently running at around 450bhp which I have to say is rather a challenge on front wheel drive! especially when blessed with our UK weather!

We have REVO Stage 3 settings on Boost level 9 (aggressive boost) which via their software is the highest we can go before we install a boost & air/fuel ratio gauge, which we will be doing before the summer. Stage 4 is on the waiting list of further mods to be done, all we need is an uprated valve train, everything else has now been done...


Modifications to Date:

REVO Stage 3 Remap
Garrett GT3071R ATP Turbo Kit
Additional Custom Hosing
Wossner Forged Pistons
Wossner Forged Con Rods
Audi RS4 Injectors
Iridium Spark Plugs
Audi RS3 Fuel Pump (tank end)
Loba High Pressure Fuel Pump (engine end)
REVO Integrated Throttle Pipe
Milltek Turbo Back Exhaust (De-Cat)
REVO High Flow Intake
Eurojet Intercooler
REVO Engine Mounts
REVO Pendualm/Dog Bone Transmission Mount
Quaife Limited Slip Diff
Bilstein B14 Pro Coilover Kit (lowered approx. 20mm)
H&R Front and Rear Sway Bars
SuperPro Anti-lift Kit

I won't go into too much detail on the REVO stages as this is really an AWD Thread, but What's it like to Drive?

ermmm... wheel spin is a small issue! And yes I was warned about this...

I think for anyone who plans to keep their Leon a front wheel drive car really should stick with Stage 2+ and no more, otherwise you have so much torque you simply skid about all over the place. You may actually find a car with half the power will blow you off because they have better traction than you do

We had already planned to go AWD some time ago so for us it wasn't an issue

Why we didn't do AWD first? well we wanted a couple of months of fun in the car and you can get still some great performance from it with Stage 3, providing you know when to apply and ease off the throttle. As for the sound, when the Garrett Turbo kicks in... OMG absolutely awesome!!! it spools up with a real hard rasping note as you hear the increased surge of exhaust gasses blasting out the back of the car. Our Cupra doesn't just growl like and angry dog, the exhaust pops too!


VW Festival at Harewood 2013

So this was project Cupra's first car show…. how exciting!!!

After months of hard work and many modifications, our Cupra R was now a car worth showing to the big wide world! The VW Festival was the first show for the project and we got some great feedback and interest with the works that we’d done. Autotechnica had their own stand there so Kung Fu took prime position!

Meet Project Cupra!









AWD Conversion

For those who didn’t know, the Seat Leon shares a similair foot print as the VW Golf and the Audi A3. There are some subtle differences but in essence they share the same floor plan which means that our Cupra R is in fact capable of being an AWD car. The Golf and Audi both use much of the same running gear and many of the components found under the chassis required for AWD. Two options for obtaining the parts are buying a donor car which may have all the kit you need, or find the parts separately through breakers yards and salvage centres etc. Donor cars are a lot more expensive and harder to come by though, the sportier series of hot hatches being the S3/Quattro or Golf R/R32 have less numbers on the road and when they are accident damaged, people generally repair them unless they are a complete write-off. Donor cars are unlikely to provide all the parts you need in good working order, generally they will have suffered from a front or rear end collision and severe damage to the transmission is more than likely.

We searched the internet for both parts and donor cars but nothing really came up for the first few weeks, about a month later we came across an 09 plate Golf R32 that was being sold off for spares at Silverlake Breakers in Southampton http://www.silverlake.co.uk/salvage/ We rang the Silverlake team and spoke to a guy called Paul Wolfe who was able to give us the low down on the condition of the Golf. Paul and the team were somewhat bemused by our requirements but took a lot of interest in our project and had offered us some bulk discount on the parts required.

As you can see from the photos below, the R32 had damage to the roof but the rest of the car was in perfect condition, this was a very rare opportunity to acquire the kit we needed to press on with the project. Apparently someone had driven the R32 underneath an articulated lorry and wiped out the top half of the car. We personally think someone had probably rolled it into a ditch! either way the R32 was in perfect condition underneath.





Paul from Silverlake was telling me the R32 was still drivable when it came into the yard as damage was only caused on the roof and upper half of the car.



The R32 had only done 20k miles so all the engine components were in perfect condition.



Apparently someone bought the engine and gear box in a matter of days, bet they thought their birthdays had all come at once!



Following some checks through their stock system, it transpired that this R32 did not in fact have everything we needed to complete the kit, one of the hubs on the rear axle, the rear nearside drive shaft and the Haldex ECU Controller had already been taken. This was a bit of a blow for us really as we wanted the full kit, we were still happy with the results though considering we had found the parts which are typically harder to come by. We paid a deposit for the bits and then continued to search for the rest of the missing kit on the internet.

Within a matter of days we then found a whole rear axle assembly for sale on Ebay from an 07 plate Audi S3 8P for £300! We couldn’t believe our eyes! Three hundred smackers was an absolute bargain! we rang the seller Faz, who turned out to be a body shop repair man. His main line of work was to buy accident damaged cars and repair them for re-sale. Faz was telling me this axle was from a S3 that had been written off from the front, the car was chopped in half in which he bought just the rear end of it for salvaging the rear quarter panels. He therefore wasn’t bothered about the mechanics or the rest of the car. I arranged a date with him and then went down in a van to the south coast to pick up the kit from Silverlake and the axle from Faz in Birmingham.

Photo below was taken from Faz’s page on Ebay when the axle was up for sale.



There were several people closely watching the item for about a week, then we came along and bought it out right! snapped it up like a dummy out the mouth! lol well we didn’t want to miss the opportunity and risk losing it to someone else.

We asked Faz a few questions about the axle to find out whether it was still a complete unit, we were pleased to hear that everything was in fact still there, the Haldex ECU, breaks, disks, diff, the whole lot!

So in the end we didn’t need to buy all the kit we had planned from Silverlake but got a mix and match of goodies from both the R32 and the Audi S3, we also saved a small fortune in the process! So the kit we ended up buying was as follows:

Silverlake

Front Transfer Box and Differential
Front Drivers Side Drive Shaft (is shorter than the shaft on a front wheel drive car due to the transfer box)
Main Propshaft
Full Wiring Loom of the car including the Fusebox (the guys at Silverlake did very well to remove the whole lot in one bundle)
Fuel Tank and Sender

Audi S3 Axle from Ebay

Axle assembly including the following kit:

Rear Transfer Box
Rear Left & Right Drive Shafts
Haldex ECU Controller
Rear Subframe Assembly
Brakes (Disks/Calipers/Pads)
Suspension
Anti-Roll Bar

It took a full day to pick up the kit starting in Southampton at 8.30am and travelling back up North to Yorkshire via Birmingham on the way. There was only two of us to lift the S3 axle into the van at Faz’s place, my god it nearly killed us it was so heavy! Can understand why the S3 weighs more than the Cupras. Once everything was picked up we dropped the kit off at Andy’s garage in Hull (Autotechnica).

We laid all the components out on the ground to see what it would look like once it’s all fitted together, this was quite an exciting moment!















Works in progress...
__________________
Leon Cupra R MK2 with Quattro AWD! REVO Stage 4 **BIG POWER Coming Soon!**

Last edited by Gagwithgaffer; 09-02-2014 at 15:48. Reason: Forgot to highlight it was Leon is Mk2 (sorry :))
Gagwithgaffer is offline   Reply With Quote
Old 09-02-2014, 15:18   #2
m0rk
sarcasm comes free
 
m0rk's Avatar
 
Join Date: May 2001
Location: Fall River, NS, Canada
Posts: 29,791
m0rk has 100 pointsm0rk has 100 points
Bookmarked! Great first post in a RR!
__________________
[/right]
m0rk is offline   Reply With Quote
Old 09-02-2014, 15:28   #3
Gagwithgaffer
Full Member
 
Gagwithgaffer's Avatar
 
Join Date: May 2013
Location: North Yorkshire
Posts: 74
Gagwithgaffer has 10 points
AWD Conversion Begins!

We hadn’t worked on Cupra Kung Fu since before XMAS and it is now February time, think the lads were longing to get started again so this last weekend we stripped out some of the interior and made a start with the cutting works.

Fitting the Audi S3 rear axle onto the Cupra R is not simply a bolt on exercise, if it was then I'm sure more people would have done it.

You basically have two options, they are:
Remove the whole boot floor plan and replace it with one from an S3 or R32
Cut away only what you need from the spare wheel well which obstructs the new axle

We personally decided it would be best to retain as much of the original car as possible, if you replace the whole boot floor plan you could run into all sorts of problems with alignment and risk bending/twisting of the chassis sub frame. We decided to go for option 2. We had one of our structural engineers come into to look at the car and decide on how much of the floor would need to be removed, we took some measurements, gripped our teeth and then started cutting. Once we had removed half of the spare wheel well then we were able to hold up the new S3 axle to the underneath of the Cupra to make sure everything fitted ok.

The only advantage we could see with option 1 would be to retain the use of the spare wheel. We may modify the boot after the conversion by putting in a box section with a lid so we can still make use of the spare wheel, also a good opportunity to hide cabling for an ICE system.

Prior to carrying out the works, we decided to strip out the whole interior of the boot including the side wall panels and rear seats. The strip down was mainly to avoid damage to the interior whilst angle grinding, but also to limit the smell of burning metal in the car! The interior is like brand new as the car has only done a few thousand miles, so we wanted to preserve its condition as best as possible. I have since brought the seats and the carpet back home from Hull during the next few months while we work the Cupra.



Boot before we stripped out the interior:





Removing the rear seats:



Draining the fuel from the old tank:



Removing the old fuel tank:



Old fuel tank removed:



Milltek Exhaust is removed, unfortunately it's not going to fit back on after the S3 axle and new fuel tank is installed. A real shame as it's only a few months old! Might need to speak to Mr Milltek very nicely and see if he can give us a new one



Removing the old Cupra rear axle:



The Cupra axle in its final resting position, unlikely to be used again...



We had to prop the front of the car up with a jack to stop the weight of the engine tilting the car forwards, this was due to removing a lot of the weight from the rear end of the car, this was more a precautionary measure though:



All the equipment and sub frame removed ready for cutty cutty



We put a big piece of cardboard in to block off the rest of the cabin to help protect the interior. Bit of free advertising for you there Mr Milltek



More sheeting up:



Final layer of sheets and cardboard, Cupra's arse is mummified!




Boot Floor Cutting Time!

Marking out the area to be cut:



Our fabrication engineer makes a start:



Cutty Cutty!



Our chap climbs in for more action:



For a moment we were blessed by the Gods marking their sign of approval!



Cutting ritual almost done:



Last piece of metal to be removed, a small square section found to just one side of the wheel well, we don't think it carried much structural value. We hadn't touched any part of the main frame so we still have a solid chassis. The new box section on the boot floor will strengthen it back up again. If necessary we will install some additional reinforcement.



The section of boot floor removed to make way for the S3 axle, when you see it on the ground it doesn't look as bad as one first thought, it's only metal! ha



Ben is preparing the S3 axle ready to lift up against the Cupra:



Holding up the R32 fuel tank to check it fits:



We found one fixing point that didn't match up against the original tank, we will have to spot weld a new bolt fixing point to hold one of the saddle straps in place which in turn mounts the fuel tank securely into position:



View looking up through the S3 axle held in position underneath the car, you can see where the axle would have obstructed the front half of the spare wheel well which was removed.



Jacking up the S3 axle into position to make sure all the subframe bolt holes match up in the right places, this was a tense moment! And yes it fits... whoop whoop!



Once we had jacked up the axle the made sure everything fitted then our work was done for the day. Our fabrications engineer had taken away the section of the boot floor that was cut out and he is fabricating up a new box section which is being laser cut over the next few days. Once the new box section is welded into position then we can treat the underneath with a protective rubber coating to stop corrosion. Once the underneath is treated then we can permanently fix the S3 axle into position.

Works in Progress...
__________________
Leon Cupra R MK2 with Quattro AWD! REVO Stage 4 **BIG POWER Coming Soon!**
Gagwithgaffer is offline   Reply With Quote
Old 09-02-2014, 16:17   #4
dav
SEAT owner no more...
 
dav's Avatar
 
Join Date: Feb 2006
Location: Kincardineshire, scotland
Posts: 1,090
dav has 20 points
Wow will be keeping an eye on tho progress!
dav is offline   Reply With Quote
Old 09-02-2014, 16:24   #5
betty_swollox
Richie
 
betty_swollox's Avatar
 
Join Date: Feb 2011
Location: Washington
Posts: 5,685
betty_swollox has 60 points
This is gna be amazing!
__________________
2010 Leon Cupra - APR Stage 2 V3.4, BCS Powervalve Exhaust and Revo Ceramic Intake

MODS NOW FOR SALE
betty_swollox is offline   Reply With Quote
Old 09-02-2014, 16:44   #6
Crafoo
Crazy Fool!
 
Crafoo's Avatar
 
Join Date: Apr 2005
Location: At home
Posts: 5,980
Crafoo has 30 points
Heard about this being on the cards for a while, I actually called AutoTechnica the other day to get some prices for a new clutch and he mentioned then that they had literally just cut out the boot.

Going to be pretty wild when it's done.
__________________
2010 Speed Blue Mk2 LCR--->Readers Ride thread
MK4 Ibiza FR 20VT
Crafoo is offline   Reply With Quote
Old 09-02-2014, 17:00   #7
AndrewJB
SEAT Motorsport UK
 
AndrewJB's Avatar
 
Join Date: Aug 2007
Location: East London E1-E2-E13
Posts: 10,293
AndrewJB has 30 points
Yeh I spoke to them about this a while ago when I heard they were collecting donor parts, not jealous at all lol
__________________

APR Stage2 420ps Instagram: @andrewjb_e13 @seatmotorsportuk
AndrewJB is offline   Reply With Quote
Old 09-02-2014, 17:02   #8
ZBOYD
Looking up at the stars!
 
ZBOYD's Avatar
 
Join Date: May 2001
Location: Cheshire
Posts: 10,988
ZBOYD has 50 points
Amazing project, good luck with it, following with interest.
__________________
Mark
email: zboyd@seatcupra.net url: www.seatcupra.net/
The occasional use of a Skoda Yeti SE 1.2TSI DSG

ZBOYD is offline   Reply With Quote
Old 09-02-2014, 17:04   #9
DanGB
Who need's a Diesel....
 
DanGB's Avatar
 
Join Date: Feb 2006
Location: London
Posts: 4,077
DanGB has 20 points
Excellent!
Be interesting to see if you get the ESP working again, been messing around with mine for a long time, but think its nearly there.

Have you got the new ABS unit and ESP controller?

I'll see you at Inters for a race

Last edited by DanGB; 09-02-2014 at 17:05.
DanGB is offline   Reply With Quote
Old 09-02-2014, 17:04   #10
shnazzle
Glass-Half-Full Member
 
shnazzle's Avatar
 
Join Date: Sep 2011
Location: Northumberland
Posts: 3,593
shnazzle has 30 points
That's amazing...stg2+ decision made 3 days into ownership. That's the way to do it
__________________

Patrick

No longer driving SEAT... Now Audi A5 3.0 v6 tdi
shnazzle is offline   Reply With Quote
Old 09-02-2014, 17:05   #11
adam cupra 20vt
Built Not Bought.
 
adam cupra 20vt's Avatar
 
Join Date: Mar 2005
Location: Mud Hut
Posts: 6,293
adam cupra 20vt has 10 points
This will be a beast! Hats off to you lads
__________________
adam cupra 20vt is offline   Reply With Quote
Old 09-02-2014, 17:07   #12
Cupra R
Senior Member
 
Cupra R's Avatar
 
Join Date: Dec 2001
Location: UK.
Posts: 2,283
Cupra R has 10 points
Your doing exactly what I would love to do.

Excited to watch this develop.
Cupra R is offline   Reply With Quote
Old 09-02-2014, 17:09   #13
Al
Senior Member
 
Join Date: Aug 2005
Posts: 7,483
Al has 30 points
Nice
Al is offline   Reply With Quote
Old 09-02-2014, 17:11   #14
Cupra R
Senior Member
 
Cupra R's Avatar
 
Join Date: Dec 2001
Location: UK.
Posts: 2,283
Cupra R has 10 points
Your local too. ;-)
Cupra R is offline   Reply With Quote
Old 09-02-2014, 17:52   #15
kevscupra
Senior Member
 
kevscupra's Avatar
 
Join Date: Aug 2009
Location: cumbria
Posts: 1,014
kevscupra has 10 points
Quote:
Originally Posted by Cupra R View Post
Your doing exactly what I would love to do.



Excited to watch this develop.

Same here I would love to have a 450bhp 4wd Leon Cupra R.

Can't wait to see how it turns out.
kevscupra is offline   Reply With Quote
Old 09-02-2014, 18:13   #16
worzel
LCR 225
 
worzel's Avatar
 
Join Date: Dec 2009
Location: Jersey
Posts: 387
worzel has 10 points
Some people make things look and sound so simple...hats off to you chaps. Can tell the determination will see this project move with pace.
__________________
LCR : Revo Stg3
Readers Ride http://www.seatcupra.net/forums/showthread.php?t=266209
worzel is offline   Reply With Quote
Old 09-02-2014, 18:38   #17
Gagwithgaffer
Full Member
 
Gagwithgaffer's Avatar
 
Join Date: May 2013
Location: North Yorkshire
Posts: 74
Gagwithgaffer has 10 points
Big thanks to all Members

This project wouldn't be worth it without the great support from everyone at cupra.net

We hope to have Kung Fu ready in time for GTI International Show this year, you will find us at the Autotechnica Trade Stand and we very much look forward to seeing you all there...

__________________
Leon Cupra R MK2 with Quattro AWD! REVO Stage 4 **BIG POWER Coming Soon!**
Gagwithgaffer is offline   Reply With Quote
Old 09-02-2014, 19:07   #18
mYGeL
Cupra Widebody
 
mYGeL's Avatar
 
Join Date: Aug 2009
Location: Stockholm / Sweden
Posts: 374
mYGeL has 10 points
Quote:
Originally Posted by DanGB View Post
Excellent!
Be interesting to see if you get the ESP working again, been messing around with mine for a long time, but think its nearly there.

Have you got the new ABS unit and ESP controller?

I'll see you at Inters for a race
DAN, If you changed and used the same ABS unit and also changed the ESP YAW sensor to the ones i gave pn on and used the codings i have it would work. And no repinning of contact on the ABS. Mine has worked without a fault for 2 years now. With working ABS and ESP..

Nice to se more AWD Cupras out there!
__________________

Seat Leon Cupra Widebody & Carbon Edt. Dont miss my Build thread:
http://www.seatcupra.net/forums/showthread.php?t=283972
mYGeL is offline   Reply With Quote
Old 09-02-2014, 19:09   #19
jmc1976
Senior Member
 
jmc1976's Avatar
 
Join Date: Jan 2013
Location: wakefield, west yorks
Posts: 2,477
jmc1976 has 10 points
I remember seeing the car at harewood , im very excited to see how it turns out .
__________________

2012 Leon CR170 FR+ Supercopa ,DSG , Remap by Vtune Leeds.
jmc1976 is offline   Reply With Quote
Old 09-02-2014, 20:14   #20
Nobber
3rd times a charm!
 
Nobber's Avatar
 
Join Date: Jul 2001
Location: Newbury
Posts: 702
Nobber has 10 points
Epic build. Look forward to seeing more updates!!!
__________________

B7 Audi RS4 - Sprint Blue with Recaro buckets
Ex Ibiza Cupra R, Leon Cupra R & Leon Cupra K1 owner!
Nobber is offline   Reply With Quote
Reply

Bookmarks

« Previous Thread | Next Thread »

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 

(View-All Members who have read this thread : 670
-herc-, -pseudonymous-, 2G, 87DRN, 8bit, 932matthew, Aaron_04, AchilleGR, acid_ash, Acksaw, adam cupra 20vt, adam.pr, Adam4D, addsLEON, AdeD, adeyspec, Adjay, Adman77, adulka, afcajax73, afolio4, akko, Al, Alan Kyp, Alan Shedden R, Alec fr, Alex1121, Allan_84, alog4287, Altech, ammo, anarchy1515, AndrewJB, andy.morgan, andy550, Andygti39, AndyHazza, andypower, Ant, aran, ARi01, ArosaRacer, Asce, Atteman, aviaa25, Azza_, Badger, BaezoN, Bam_lcr, banksy21, BarnescupraR, BarryB, Beazy, BeEzA, BeezaDave, Ben huxtable, ben450, Ben750, benbaxter, benbissett, benito, BenRussell38, betty_swollox, beunhaas, big eck, Big Lee M, bigluke, Bignod00, bigwull, BIG_Y, Biker, billman, Black Mamba, black-spring, BlackCupraa, BlackFR, Blackpearl__, Blanco92, Blandy88, blueleon, bluenose172, bmxshane, boabym, boditza, boggle, Bogwoppit, Boostaholic, boxster, Br!dges, BraddersThe3rd, bradh, Bregt14, brett1223, Brinkz, Bryan4692, BryanWalker, budweiser28, Buglass21, Burnout, bushiee, BUX FR170, Cabbage, Cammy_, Canners89, Carl__K1, carpediem, Chadwick91, Chambers_CUPRA, CharlieRCupes, Chaz, cheunkh, chiefos, Chippyabs, Chris-224, Chris-cupra R, chriss1987, chrisw_mk2cupra, chris_ffx, Ciosmi, CJ1985, Clazzer, Clossie, clutchitupson, cocadave, Cougar, cpcpeter, Crafoo, CraigFrTsi, crespo1987, csd_19, cuky, CUPRA QRO, Cupra R, Cupra-Sweden, cupra.al, Cupra137, cupra2424, cuprabaz, cuprart500, cuprat, CupraVyBz, cupra_ahhh, Cupra_power, cw13666, D.K, d4pp3r, dalegolf215, daley2450, Damoegan, Damon_, Dan FR, danblowes, dandam, DanGB, Daniel M, DanielSon, daniel_18, dannyboi91, DansFR, Dante L2A2, Dan_DCDezign, Dao, darkhorse, Darth Revan, Dave.w, David20vt, david222, davidif, David_smith_909, dazescort, dazza1414, ddc, deanodaf, deansutherland, Deejay, demonic pete, Deplunk, derelyth, Designtime, Devoured1, dgjdrummer, dholdi, Diesel184, Dillinger, dj_troopa, Donnyboy, dooresy, Dorny, drizzlefizzzax, Dude, duncinascoob, ea4920, Ebes86, EdHorny, EduRamPT, Emibuddedge, Enog, erreesse, evo2345, Excalpino, F2 Stu, Fabio_GR, Fahid82, fike, filbro, FINCH, finnthebt, FlexLeon, fr 150 boy, Fr-jonny, Frederic-cupra, freekie, Frenzi, frtdi, FR_Kris, fyfe9, G-baby158, Gabster, gac, Gagwithgaffer, gamer555, gammar, Gareth 265 R, GavFR, Gav_Kara, george g, GeorgeChios, Gex, ginger3131, GlanzaV, glenpring, Glovepup, GolfRS, GordieC, Gouldy8892, grahams81, Gray & Kirsty, Grayboy, Greavesy, Greerso, gregy_reynolds, Guncha, hamlet4270, hamlyn, harty190486, Haze, hellowed, herbie147, Hobbiniho, holmefield, honkifyou, Horseman, hubbly_bubbly, Humpers, Hurdy, hutchy1011, hyphon12, IbizaAlex, ibizaboi, IBIZA_W1LL, ibizouba, Ickx, IlsonDanni, Impulsive87, Israar, ivo098, J.B., Jack1694, jackett, JACUPRA280, jake, James23Parkin, James86, JamesLCR, james_cupra_tsi, jamfull, JAMI3, Jamie, jamieread, Jamiethorley, Jamie_Ldn, Jaruba, jasecx, Jasonh85, Jasp_boc, Javirero, jay87, jayjaycupra1.8t, jc_boc, JDUB 20V, jeff030379, jendy, Jfox, Jhp, Jimbobcook, jimbo_h, Jm1987, jmc1976, JMP, JoãoOliveira, jocco, JoeySnowboards, Joey_c, john-e-big-guns, john_tdi, Joker116u, JonIbizaSC, jonjay, JonoWilliams, Jonwm, Jord, Jordan-, Jordanlivi1, jordibravo, JoshCupraR, jreedy, Jrice283, Juhuts, Juusoa, k1_Joynesy, Kali, karakus, Karl db, KarlB1, kazand, KDV, Keegan, Keithslippery, Kenwardo, Kevgrady, kevlaa, kevscupra, killieboy123, KillyBamp, kiminauta3000, Kipsy, KJS, KK, Klaus71, kr42yxx, kra_rz, krik, Lamont, Lance Uppercut, Laser, LasseO, Lavery, lc_allan, leegriffiths, lee_fr200, leighwinter, Leon Fr170TDI, Leon1600s, LeonCR, LeonCupraRTSI, leonmk2cupra, leonpr81, lexyy, Linch, Linning726, litcan91, Little Red, lloydie, lodge, Lowe, Lowry020505, lsg60, lsm, Lucio Bravo, lugsy, luke101, lukes46, lupocharged, m.001, M1KEH, mackgold, Mackin92, Mahoney_cuprak1, maikblackcupra, MalcB, malky39, Mandu, mannysimba, Mao, marcus.l, Mark One, markmck, markpile, marks_leon, MarkWales, mark_eisner, martybelfasTfsi, Matt-V5-Duffy, MATTCR, mattg93, MATTJTDI, mattmk2gti, mattygreen, matt_s, Matuner, matylad, Maypack, mcd90, mcsolle, metman9185, michaelg1001, Mike Mezza, mike0105, Mikeey, mikeyjd, mini_racer, miss_cupraR, mjstokes85, mk4 cupra, MM95, Mo Arif, MOE16V, mohamedhassan, Molvi, monzablue, morto, mosso, mrwookie, Mu5hy, mugge, murph81, mwat5on, mYGeL, naskoradew, nath86, nc30rider, nd_cento, Neil1, neron4o, Never2old, nick-fr, NickCupraR, Nickeh, NickyJam, Nick_J, Nick_TDi, Nikko@BG, nikos.87, Nobber, Number12, NWhiteley, OldManPooley, Oliver_findlay, ongoing, Orion, osborne19, oswal, ozaudio, Ozneider, p-twirler, paddles, paulgtir, Paulr89, paul_zx6r, Penguin, Pgrang1, phil 9289, phillbriggs, PHILMEWAGON, philrom, PhilT123, pigeon fancier, pita100, ploots, PnP, podderz, Poizk1, POPOV, PPHenry, predo, Primey86, Probot-matt, Project1P, QuietQuackers, quintonrose, R4cup, RACK, rae1001, raflo83, ramborobert, Rapid Shade, rastajambo, rcky89, RDS, Readie46, Red ibiza, redevo1, redlinemike, RedRocket, Revo Performance, Ric 2001, Rich - FR, Rich12885, RICH81, RichardE0, richicupra, Richoscos, rik_t, Rivva, RJohnson, rmarti88, rob929, robbyd6, robdf2, robertj, roberts99, RobH, robthebubble, rocket_26_, Roffel, Rokerlad, Ronin225, Roohul, rosshutchie, rOtah, RSAlex, rsulam, Ruffy, Ryan20, RyanC93, RYAN_101, Sam fr, Sastoque11, Sausageinabun, Scam, scazenave, Scott-o, Scottcave94, Scottmf, scotty1310, Scousekidda, sdownie1, SeanH., Seanographer, Seanscott1992, secret.squirrel, shadak, SHADY-NINJA, Shanegerman_vag, ShaneMitchinson, Shapin, Shaun, sheahanwarren, shnazzle, Shrek, Sid5483, Sile-R, silver surfer, simon128927, simonali, Simonhghs, sitechris, sjohnston903, Skovene, Skyre, slavas, SM02MCK, Smoki333, Sneaky1337, snk, SNOWZ, spen, Spirit Furtive, splinter_cdo, spoolupboy, Sprogpole, Squealy, ssbnumber34, Stakeknife, stathis1, Stathr02, Steven67, Stuart83, stupot_1982, STW, Stylance, sunilbass, supa_sam, superstu88, Suprant, swordfish103, sxi20vt, Tam, Team cowie, telewebby, terryt, th0m4s- c33, Thafussa, the parrot, TheA-Team1979, Thompa93, Thursday, Tiago_bnr34, Tiburon, Timmyg1975, TMO, tom t, Tom-FR, Tom., Tom0StarC, Tomer 20VT, tomhcupra, Tomibz, tommy918, TommyR, Tomo, Tomyz, tony cupra r, tony323ci, tonycane, tony_burrin, toosmiles, traumapat, TravisFR, trevorg1988, Trx-33, tuan21, Tunerko, twf, Twig2010, Updown789, v0id, vINyL3, vmark89, vroomtshh, VT86, vwbloke, waqy, warren30, wazb, wb k1, WeeG, welly, wezza12, whitez1000, wild willy, wildog, wilfster, wilksy, wilky87, will130787, willsgn, Winch, wolfiecuprar, worzel, WreviloX, x24sevenbikerx, xDaNx, xxjay247xx, xyz, x_jago_x, Y80LEE, Yaseen1991, YIN, younger25, yozza1987, zare, ZiggyEP3, Zipcode, zomby, [M]ike, _chris_
Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +1. The time now is 02:32.




Website © 2014 SEATCupra.net

Disclaimer: SEATCupra.net is not an official SEAT site and is not affiliated to SEAT in any way. Visit the Official SEAT Website.

SEATCupra.net are not directly responsible for information which maybe posted in this forum.
All content is viewed and used at your own risk. We do not warrant the accuracy or reliability of any of the information.
The views expressed herein are those of the individual contributors and not necessarily those of SEATCupra.net or SEAT
All trademarks and copyrights remain property of their respective owners.