-
Guest, 🚨New Stock alert: Premium CUPRA valve caps now available in the store 👉 Order now from the merchandise store
What cone filter
- Thread starter turbomick
- Start date
Open cone cotton gauze type I had a nice big jr one in blue and remove the bonnet sound proofing to amplify
Mick I just bought a jetex/JR cone for £43 from partbox and got a heatshield from ebay for £29.
They look great but not fitted yet
They look great but not fitted yet
So you're more bothered about how loud it is rather than the filtering properties to protect the maf and turbo?
Both really mate just want it abit louder av got a 80mm b5 tip and my mate making me a cone filter sheild at work just wounded if any filters are louder than others
Make the shield so it fits fully look in my thread to get the idea
Never really come across a "louder one" my cai that sat behind the fog light was really loud
Never really come across a "louder one" my cai that sat behind the fog light was really loud
Make the shield so it fits fully look in my thread to get the idea
Never really come across a "louder one" my cai that sat behind the fog light was really loud
Had a look pal cheers just been making the templet for my mate. Nice lc u got there like the colour n intrested in the lg didnt no they did the bhp. What do they cost
Make sure it seals on all edges
Yeah ta is a nice colour
£220 iirc now they are
May have to look in to getting one next month are they easy enought to get wired up?
yeah simple http://www.seatcupra.net/forums/showpost.php?p=2830762&postcount=131
mine came ready made
NEOCON
Guest
NEOCON
Guest
Not bad. It's a foam filter with an alloy neck/base so pretty light. I got it from Merlin Motorsport, for some reason you can't buy them directly from ITG.
I wanted to post some pictures but I don't think I'm allowed yet 'cos I'm a noob and my post count hasn't reached the limit
Not bad. It's a foam filter with an alloy neck/base so pretty light. I got it from Merlin Motorsport, for some reason you can't buy them directly from ITG.
I wanted to post some pictures but I don't think I'm allowed yet 'cos I'm a noob and my post count hasn't reached the limit
How much was it mate? 80mm neck I take it like the Jetex FR/FC cone's?
NEOCON
Guest
I think it was £49 + VAT. Some of the odd diameters they do are more expensive though. I went for a 70mm OD neck on the filter and also bought a piece of silicone tube with a 70mm ID to fit onto the MAF (MAF is also 70mm OD). That way I didn't have to use any reducers. I've read on here that a lot of people are using the Jetex/JR filters but I wanted to try something different.
I'm also using something different for a dump valve from the usual Forge set up. I've go a Turbosmart recirculating valve. Made in Australia and I must say the machining on it feels very good.
Similar threads
