Search results

  1. Headlight Woes

    That is the correct part number. Do you have a bit of a gap or is it a tight fit. You have some adjustment on the bolts. Sent from my SNE-LX1 using Tapatalk
  2. Wiper motor reset after changing

    Yer that's the one but for me it was at the stop at the back. It's front of you have it set in service position. It's back if in standard position. Sent from my SNE-LX1 using Tapatalk
  3. Wiper motor reset after changing

    It's on the actual bracket that bolts to the motor. Stupid place for it. Sent from my SNE-LX1 using Tapatalk
  4. Wiper motor reset after changing

    Take the nut off that connects the linkage to the motor then plug the motor back into the car and run the wipers once. That will set the motor back up for home position then reattach the linkage making sure its set to home position with the arrow marker then reinstall the motor. Then put the...
  5. Coolant

    I got mine on ebay. Grey bottle with vw badge on it. Sent from my SNE-LX1 using Tapatalk
  6. Coolant

    I use g13 coolant. Same stuff seat dealers will sell you. Sent from my SNE-LX1 using Tapatalk
  7. What window wipers is everyone using?

    I got the bosch wipers on my mk2 and they fit just fine. 6 month old and still clear the window with no noise. Sent from my SNE-LX1 using Tapatalk
  8. Tyres

    225/40/18 is standard tyre size for that wheel. That's what I have and its what seat recommend. Don't use that garage again as they clearly retarded. Sent from my SNE-LX1 using Tapatalk
  9. What’s my car worth

    It's worth what someone will pay for it. Sent from my SNE-LX1 using Tapatalk
  10. Paint code

    Lc9z diamond black Sent from my SNE-LX1 using Tapatalk
  11. Tyre pressure seems high

    Tyre pressure will always be the same even if you go from 16 to 18 inch tyres. Online tells me it's higher than what the sticker on the car tells me. I went from 16s at 34 front 32 back to 18s at 34 front 32 back all cold pressure. Sent from my SNE-LX1 using Tapatalk
  12. LED Headlight How-To - CANbus Error Free

    I came to the same conclusion Sent from my SNE-LX1 using Tapatalk
  13. Aftermarket hid kit, lights flickering

    Also be careful as some resistors get stupid warm. And can cause damage. Sent from my SNE-LX1 using Tapatalk
  14. Aftermarket hid kit, lights flickering

    Yes it will but it will also blind everyone and get you a £100 fine. I have tried hids and leds and have gone back to a good brand bulb. Don't chase what you can't have with your current light setup. Oh and still won't stop the flicker as that is part of the bulb test these cars do Sent from...
  15. Loud bang and maybe white smoke from exhaust

    i bought as new pipe as the lugs where buggered
  16. Loud bang and maybe white smoke from exhaust

    i had this and was intercooler pipe driverside down very bottom..Its hard to see
  17. LED Headlight How-To - CANbus Error Free

    A good led will give as good as a standard bulb. Don't go buying a led expecting it to give the same light pattern as a proper led lamp or hid lamp. It's just not going to happen ever. Sent from my SNE-LX1 using Tapatalk
  18. LED Headlight How-To - CANbus Error Free

    You can't get rid of the flicker as our cars send a small amount off current to the bulbs to test they ok. And an led only needs a small amount of current to light up. A resistor will not stop that from happening. All the resistor does is change the resistance of the signal being sent back...
  19. No MK2 Leon 1P on VCDS?

    VCDS Lite does not work on Canbus
  20. Axle

    Had a wheel bearing changed on rear both sides and my mechanic has said that the hub bolt is threaded and can't get the new one in but the old one does go back but it's not safe. He has said maybe new Axle needed, and I was wondering is it just a new hub axle that will need to be replaced as he...
Christ Knott Insurance - Competitive quotes for forum members