Matt's TDI NOW SOLD!!! Pics of the new car revealed inside.....

Matthewd91 · Jun 23, 2011

Current Spec

Exterior
FR/Cupra Rear Bumper
Debadged Rear Boot
Dewipered rear
Rear S badge sprayed matt black
Front S badge carbon wrapped with red outline and matt black surround.
Cupra Splitter
Standard 30% front tints
70% Rear tints
SeatCupra.Net stickers on rear side windows
25 LED sidelights(ebay)
24 LED Reverse Light
Osram Nightbreaker Plus Dipped Beam
White LED interior light
Heko Wind Deflectors
C2 Stubby Ariel
Rear Lights tinted Red
Colour coded engine bottle caps
Bonnet Bra
Red brake Calipers
Private registration plate!

Interior
Alpine x305s Headunit - Full ipod/iphone connectability
Loudest.com 1500watt amp
Sony Xplod 1300w sub

Chassis
JOM Coilovers (Venom Motors)
Ford puma droplinks
20mm Rear Hubcentric Spacers

Engine/Exhaust
Custom remap by Ecotune Hillington ( 151bhp & 253ft lbs)
Milltek Turbo-Back Decatted exhaust (Non- Resonated)
VRS Cone in a Box Filter
TDI Engine Cover
Jabbasport sticker at front of engine bay.

Wheels
Vrs spiders, powder coated anthracite
Tyres are 205/40/17

mick-fr · Jun 23, 2011

Matthewd91 said:
so i can see the looks of people wondering how a stock looking ibiza has just flown passed them haha!!

What else have you done to it then? Because it is basically stock lol.. (bar the debadge, dewiper and sprayed badges)

What's your plans? Glad to see you've started after a few days of ownership

Matthewd91 · Jun 23, 2011

Well thats all so far as this was my first day off since getting it lol!!

Planning to get cupra alloys, possibly orange brake calipers and a few subtle orange touches here and there, nothing to extreme though, just to make it look that wee bit different! Tinted windows will come aswell as lowering and possible new rear bumper! Got my alpine ida x305s headunit from my last car still to fit along with my sub and amp so that shall be done next day off.

Matthewd91 · Jun 27, 2011

Can finally post pics so got a few here from my 1st week of ownership!1

The day i got it..

Spraying front and back badges...

Finished product...

Dewiperd...

More pics to come of grill surround sprayed.. not had a chance to get it uploaded yet!!!

Bean · Jun 27, 2011

Looking good

rf860 · Jun 27, 2011

Looks like a nice example. Personally i would have just taken off the badges to spray them matte black, but each to their own. Good luck finding cupra alloys for a decent price, plus they're like hens teeth to find. Get it remapped and you'll be looking at a bit more power than a standard fr tdi!

Matthewd91 · Jun 27, 2011

Yeah i was going to take the badges off to do them but couldnt get them off so just masked the car and worked perfectly

Yeah i imagine they wheels will be hard to find

I'll get a set eventually though!!

Remap would be nice just need to save up some money and get it lol!!

Any other cheap mods that would look good that anyone can recommend?

rf860 · Jun 27, 2011

Matthewd91 said:
Yeah i was going to take the badges off to do them but couldnt get them off so just masked the car and worked perfectly Yeah i imagine they wheels will be hard to find I'll get a set eventually though!!

Remap would be nice just need to save up some money and get it lol!!

Any other cheap mods that would look good that anyone can recommend?

Interior chrome vent surrounds and gear gaitor surround.

Cupra handbrake cover

Cupra vent switches

Paint/vinyl the fascia surrounding radio and climate

Leds for all lights

Vinyl behind the registration plate and lower lip of front bumper

Vinyl external door pillars

Debagde the tailgate

Tint the front fogs

Flip key

Sent from my HTC Desire using Tapatalk

Matthewd91 · Jun 27, 2011

Mmmm quite a good few things there, already got LED side lights and looking to get Osram nightbreaker plus's for dipped beams.

Fascia round the headunit shall get done just not too sure what colour?

Regarding the vinly behind the reg plate/lower lip, ive seen this done on lots of other ibizas but none were black so unsure what colour to get them done?

The external door pillars i could spray myself i reckon and ive debadged the back and side wings!!

Pic of all black front grill now...

rf860 · Jun 27, 2011

Matthewd91 said:
Mmmm quite a good few things there, already got LED side lights and looking to get Osram nightbreaker plus's for dipped beams.

Fascia round the headunit shall get done just not too sure what colour?

Regarding the vinly behind the reg plate/lower lip, ive seen this done on lots of other ibizas but none were black so unsure what colour to get them done?

The external door pillars i could spray myself i reckon and ive debadged the back and side wings!!

Pic of all black front grill now...

Fascia - gloss black, carbon vinyl

Front lip etc - wacky colour like green or Orange or subtle carbon vinyl.

Sent from my HTC Desire using Tapatalk

Matthewd91 · Jun 27, 2011

See i was thinking a black and orange theme like orange roof so thats a plan for front lip n reg plate cheers

May have to get that fascia off and get painting!!

Cheers mate any more comments welcome !!!

rf860 · Jun 27, 2011

orange calipers? Personally prefer the facelift fr alloys over the cupra alloys myself, not being biast

Matthewd91 · Jun 27, 2011

Orange calipers would look nuts

do you have a pik of the facelift fr alloys? dont think ive seen them!!

rf860 · Jun 27, 2011

Thats them on my car. Look through my reader's ride to see the fascia vinyl wrapped gloss black.

Matthewd91 · Jun 27, 2011

There nice a like them, just think the cupra wheels seem to fill the arches a bit more!

Where would you recommend to get vinyl wrap done? or you just do it yourself?

rf860 · Jun 27, 2011

Matthewd91 said:
There nice a like them, just think the cupra wheels seem to fill the arches a bit more!

Where would you recommend to get vinyl wrap done? or you just do it yourself?

They are the exact same size as the cupra alloys - 205/40/17 size for tyres. Mines probably looks smaller because my car is on standard suspension which sits too high. Hopefully will be sorted out soon!

Can just do the vinyl yourself, needs a bit of time and patience.

Matthewd91 · Jun 27, 2011

rf860 said:
They are the exact same size as the cupra alloys - 205/40/17 size for tyres. Mines probably looks smaller because my car is on standard suspension which sits too high. Hopefully will be sorted out soon!

Yeah mibby thats why, personally i still prefer the cupra wheels though!!

Can just do the vinyl yourself, needs a bit of time and patience.

I dont really have a lot of patience haha i get annoyed after 5mins, my pals cars going to clyde wraps soon to get the roof done so may see how much they would charge to do it, surely not a lot since its just 2 very small parts?

Forgot to ask earlier, do you get orange hammerite? coz ive never seen any!!

rf860 · Jun 27, 2011

Matthewd91 said:
I dont really have a lot of patience haha i get annoyed after 5mins, my pals cars going to clyde wraps soon to get the roof done so may see how much they would charge to do it, surely not a lot since its just 2 very small parts?

Forgot to ask earlier, do you get orange hammerite? coz ive never seen any!!

I've got no patience and managed to do mine in a few hours. Not sure about the orange hammerite, maybe try halfords for break caliper paint instead.

Matthewd91 · Jun 27, 2011

May give it a go depending on the price i get quoted to do it! Shall rack the brains of halfords finest workers to see if you can get it in orange

) no doubt they wont have a clue, its just easier than break paint coz it sprays straight on!!

Matthewd91 · Jun 30, 2011

Osram Nightbreaker Plus bulbs ordered last night

hopefully be here before the weekend and shall get them fitted and get pics of them with LED side lights up!!!

Matt's TDI NOW SOLD!!! Pics of the new car revealed inside.....

MattyD

Mégane F1 R26..

MattyD

MattyD

Torque Junkie... Gimme mo

Active Member

MattyD

Active Member

MattyD

Active Member

MattyD

Active Member

MattyD

Active Member

MattyD

Active Member

MattyD

Active Member

MattyD

MattyD

Similar threads