correct

  1. Shadders

    Correct Tyre Specification

    Hi guys I need to get some new tyres for front of my car, 2.0Tdi Sport 225/45/17. Looking at Goodyear F1 Assymetric. I just wanted to check if I need to go with the 'high load' 94Y or if standard 91Y are OK? I ask because when inflated to manufacturers spec of 32psi look very 'squashed'...
  2. Shadders

    Correct Tyre Spec

    Hi guys I need to get some new tyres for front of my car, 2.0Tdi Sport 225/45/17. Looking at Goodyear F1 Assymetric. I just wanted to check if I need to go with the 'high load' 94Y or if standard 91Y are OK? I ask because when inflated to manufacturers spec of 32psi look very 'squashed'...
  3. Correct engine oil

    What is the correct oil spec for fr tdi with dpf, is it 50501 or 50700vw spec?
  4. correct oil ?

    Hi there am doing an oil change this weekend on my mk1 fr 1.8, Petrol ,, what oil should i be using have read 10w-40 and also 5w-40 ? which should i use . also what brand is best to go for or does it not really matter if you go decent .. Also is one 5ltr bottle enough as the manual says...
  5. Upgrade wheels - correct offset?

    Hi everyone, bought a Altea 2.0 tdi dsg and want to upgrade to slightly better looking wheels. Have seen some for sale being described as VW/Audi/Seat fitment but don't know if they will go straight on? The exact specification is: 7j x 17 PCD 5x100 centrebore 73.06 with spiggot rings reducing...
  6. elliott87

    cheap alloy wheels with correct offset

    looking for some cheap alloy wheels, ones that look okish lol. Need to be correct offset so i dont have any issues with clipping my calipers. 18's i prefer. And dont need tyre's. Got a set just now but they clip my caliper's when new break pads fitted. Dont really want spacers. Any1 any idea's?
  7. G12MO X

    Correct DV Fitment?

    Can somebody please tell me the correct way to fit a forge007, there is small vaccum on top and bottom and side fitments. Does it mater which one goes to intake and which one goes to boost pipe? I have taken off and my logic says the bottom goes to boost and side goes to intake pipe, am I right...
  8. skahigh

    Which is the correct LCR Suspension?

    Right guys, I'm going to have to throw this out to the floor because I'm getting lots of conflicting information. I've bought some new KW shocks and springs for my LCR but I'm not 100% certain that they are correctly rated for my car and I would like to be sure before I have them fitted...
  9. Mr Roboto

    Which MAF Sensor is correct?

    Can any one tell me which one of these MAF Sensors is correct. They both have the same part number stamped on them. The top one is the standard Bosch Sensor and looks the same as my old sensor. The bottom one is a after market one but it has the wire on the out side. Are the the...
  10. lukecupra2001

    correct part no. for s3 lower brace?

    · 8N0 199 403 B - Audi S3 lower strut brace · N 908 106 01 – riv nut x2, for lower strut brace went over to my local Audi today and gave them these part numbers that i got off here and they looked at me as though i was daft!! told them what it was that i wanted and again not a clue!if...
  11. Radio help

    Morning All Disconnected the Battery yeserday, and the radio asked for a code. I put the code fromt eh radio handbook in, but it didnt work? I treid switching it off and on, and then it just said "SAFE", so I turned the radio on, left it 1 hour, and it came up with 2000. I then put the code...
  12. m.r.davies

    climate control - not keeping constant temperature

    I was on a long journey recently and had the climate control set to 20 degree's However i noticed a physical change in the temperature, throughout the journey, the climate still read 20, but we were much colder in the car compared with the rest of the journey I think it maybe my pionner...
  13. Derek

    Rear washer (is the dealer correct?)

    My friend has a PD100 and has had the usual washer blowing off that most of us have encountered. When she took it into our local dealers for its service they said they will only fix it under warranty the first time it happens and from now on she must only use Seat washer fluid to prevent it...
  14. alx_chung

    Correct Diameter size for Shocks?

    Hi there, I am just about to get some Koni FSDs for my 2.0 TDI Ref Sport and was wondering if anyone knew what the diameter was? I was speakng to Andy from Awesome today and he said that you can get a 55 mm and a 50 mm kit for the Leon 1P. I am going to check this in the morning (if the snow...
  15. Is this the correct Coolant Temp Sensor??

    Being a complete novice..i wanted to make sure that this is the correct Coolant Temperature Sensor for a 1.4 Seat Ibiza(2000). https://secure.gsfcarparts.com/shop/basket.asp Cheers :)
  16. Correct Ibiza Cupra Handbrake Cover Part Num?

    As the title! Searches have unveiled one part number which is incorrect. Cheers
  17. Correct Idle speed?

    Hi Guys What should my LCR be idling at when warm? Seems to idle at 750rpm and boost gauge sits at -18psi I'm sure it used to idle a little bit quicker and sit at -20psi Does it even matter? Just curious. LCR revo stage 2, Milltek Cat back with Piper d.pipe. Cheers
  18. correct tightness or torque (wheel bolts)

    Does anyone know what the correct tightness or torque is for the wheel bolts on the Leon?
  19. jason-jm

    am I correct in thinking amd lock ecu

    previous owner had map done at amd... p torque and jabba told me id need to take it to be put back standard before they could map it for my ko3s trouble is... AMD is 500+miles round trip :( and i dont want to take it there for stage 2 as its miles away and they seem to think...
  20. correct valve for LCR?

    http://www.awesome-gti.co.uk/store/product.php?xProd=3714&xSec=140 what is the different between a 007, 007P and 007PC?
Progressive Parts, performance parts and tuning specialists