8v to 16v swap?

[jc_boc]

If you have any details on that supercharger setup for the 8v, I would appreciate it mate. might be worthwhile checking out.

 

[Dave_R]

Whats with the caps????

Here you go
http://www.bahnbrenner.com/vw_audi/products/602/BBM_Supercharger_Kit_Lysholm_MKIII_2_0L

 

[rocket_ronnie]

That supercharger kit is for US cars only

 

[Dave_R]

I don't know...... not sure on the 8v lump and I decided to stay N/A after all the looking about lol

 

[jc_boc]

hmmmmmm, sorry caps was on before. My bad. So now I am still stuck in a predicament I guess. geez they never make this easy for a person do they heheheheheheehe?

 

[rocket_ronnie]

Its not easy but hell of alot more rewarding when you've built it all by yourself

 

[Dave_R]

Well if you gonna swap the 8v for 16v to turbo it in the future you mate as well fit the 20vT lump..... same amount of work involved with the mounts and you best to use the 02A box from a 16v, so again you will need to change from rod to cable anyway. You can get the ecu and map from Quantum Performance Engineering they will also wire a 20vT loom with a 8v/16v loom all you will need is to fit it all.

Here's the link Quantum Web Site

 

[raddo-dave]

try g-werks they do a kit for the 8v, not cheap tho

http://www.g-werks.com/Products_Superchargers_BBM/Default.aspx

 

[jc_boc]

Has anybody got the casting number for the 16v head off the 2.0L 16v motor. The ABF engine. I can bolt it onto my block, just need to check valve lift between the two. All the breaker yards are asking for casting number or if anyone has a spare head lying around that they would like to sell?