Any help with this please ?

[Dee95]

 

[SteveGSXR600K1]

Looks the the SatNav SD card has become corrupt. Probably won't make any difference, pop the SD card out and back in from the MIB1 unit in the glovebox. Then power cycle the Infotainment system by pressing and holding the power button until it starts to boot up again.

Post any details on the SD card, ie, the part number, etc, as someone might be able to send you the corrupted files.

 

[Dee95]

I have tried that but still no luck!

 

[Deleted member 123864]

Pop the SD card into a computer and check if it’s OK

 

[jonboy984]

I am by no means an expert however have been reading this thread:

Updating the inbuilt Mib2 Satnav / Mib2 tricks and Mib1

While I was searching the net today I found some good information sources about the navigation system updates. As you know navigation system works with the sd card that is installed at slot 2. All the map is installed in it and system uses these map from sd card. So if you can update the map...

www.seatcupra.net

I think you have an MIB1 system and you need an MIB1 SD card. That does not look like an MIB1 SD card and is therefore unlikely to work.

 

[Bedlam]

I am by no means an expert however have been reading this thread:

Updating the inbuilt Mib2 Satnav / Mib2 tricks and Mib1

While I was searching the net today I found some good information sources about the navigation system updates. As you know navigation system works with the sd card that is installed at slot 2. All the map is installed in it and system uses these map from sd card. So if you can update the map...

www.seatcupra.net

I think you have an MIB1 system and you need an MIB1 SD card. That does not look like an MIB1 SD card and is therefore unlikely to work.

Agreed, the card is for a MIB2 unit, a MIB1 card is required 5F0.919.866.#
# being version letter

 

[Dee95]

Thank you guys for the help!