Getting ready for the Cupra R rear conversion

[sportbilly]

remember to keep the white round the exhaust clean, dont want it getting that yellow tinge from the exhaust !

 

[alans]

http://www.lester.it/en/dettaglio.php?a=3813

sorry to hijack a little but where can you order that from i googled could find where to order from!

 

[shaba]

where can I buy these black BBS seat alloy wheels from?

 

[robdf2]

where can I buy these black BBS seat alloy wheels from?

a BBS distributor? or a seat dealer

 

[DGF264]

I'll be using this guide


Sent from my iPhone using Tapatalk

 

[DGF264]

For the people with these fitted..cupra R diffuser is bonded to my standard apron..just waiting on exhaust!

Question is - do u also need to cut the plastic that the rear apron clips into (the bit that's obv still on the car) where the number plate screws/attaches to - under that. Does that need cutting? Or does the exhaust go under that and clear it? Cheers!


Sent from my iPhone using Tapatalk

 

[cupra.al]

from the pics ive seen it will need cutting for the exhaust to sit through.

 

[DGF264]

Ahhh ok.. Did think that.. Cheers! Anyone else confirm/deny?


Sent from my iPhone using Tapatalk

 

[Danny-]

how much did the rear diffuser set you back?
I need mine replacing

 

[DGF264]

The cupra r one was £190 and I collected it


Sent from my iPhone using Tapatalk

 

[DGF264]

Guys that have done this conversion.. Do I also need to cut the valance that's circled to allow the twin pipes to come through? Cheers!


Sent from my iPhone using Tapatalk

 

[sambryant]

ignore my comment as I can't remember

 

[DGF264]

Lol what comment Sam?! Anyone know? I've emailed Ben (Banksy) as I'm sure he has this set up fitted... Just need to know 100% lol!


Sent from my iPhone using Tapatalk

 

[Crafoo]

Lol what comment Sam?! Anyone know? I've emailed Ben (Banksy) as I'm sure he has this set up fitted... Just need to know 100% lol!


Sent from my iPhone using Tapatalk

I've not read the whole thread so if I missed something sorry, but if you are wanting to have the Cupra R rear diffuser then yes you will need to cut the holes out of the valance for the pipes.

 

[DGF264]

Crafoo I've already fitted the Cupra R diffuser to my standard Cupra apron..and cut holes out etc. What I'm wanting to know specifically is do I need to cut holes out of the plastic/valance thing circled in my pic to fit the exhaust??
Cheers!


Sent from my iPhone using Tapatalk

 

[Crafoo]

I have no idea what that is, doesn't look like anything I would expect to see there, I thought it was just the plastic valance.

Basically looking at the picture, yes, you will need to cut holes.

 

[Guncha]

You need to cut holes in this plastic

 

[DGF264]

The standard apron bolts/screws back to the valance in the picture. And cos the Cupra R diffuser is bonded to the standard apron..that as well bolts/screws to the valance in the picture lol. Right ok.. Looks like I need to cut holes in this as well then! Cheers!


Sent from my iPhone using Tapatalk