LCR seats foam worn

[Haze]

Hi guys, pretty sure my LCR has the standard seats (doesn't say recaro under stitched R,) either way the drivers right hand side bottom support has starting to poke the fabric and I can feel it on my leg and getting in and out puts alot of tension on the thin layer of fabric covering it. The foam has worn away. What's the process I can do to fix this?

 

[jt20vt]

You can take it to someone that does re upholstery for cars and get them to fit an new bit of foam in or there is a guide to taking off the base seat cover in FAQ's section and do it yourself.
Some have done it themselves and got a replacment foam cushion at the same time. I got an upholster to do it a few years back. Cost me £30 and took them 30 mins as i didn't have time or tools to do it myself.

 

[shakzTDI]

Theres a forum on here on how to remove the seat cover. Its the same procedure when replacing the foam i did it myself its not that hard but the part takes 3 weeks from spain at £90.

 

[Grayboy]

Try Sere motors I got Recaro foams in less than a week.