Lowering springs

[Craig leon fr]

Hi guys, I have a seat leon fr tdi 170 2010 I was looking at a set of h&r lowering springs (code: 29176-1) which are -40mm. How much would they lower my car as I know the fr is slightly lower than standard and would they fit onto standard dampers (only covered 40k) Thanks Craig

 

[Never2old]

You're looking at about a 25mm drop with h&r springs and yes they'll fit on existing dampers

 

[Craig leon fr]

Thanks for the reply. Just wondering what springs would lower the car the most as I don't want to go down the coilover route. Thanks

 

[Never2old]

If you want to go lower the sport line springs from eibach will give you 50mm front and 35mm back so the nose down look

 

[Damian @ DPM]

Hi guys, I have a seat leon fr tdi 170 2010 I was looking at a set of h&r lowering springs (code: 29176-1) which are -40mm. How much would they lower my car as I know the fr is slightly lower than standard and would they fit onto standard dampers (only covered 40k) Thanks Craig

Afternoon,

Around 30mm.

Damian @ DPM Performance

 

[Damian @ DPM]

Thanks for the reply. Just wondering what springs would lower the car the most as I don't want to go down the coilover route. Thanks

H&R 40mm or Eibach Sportline 50mm/35mm springs would be the lowest options, both would fit your standard dampers.

https://www.dpmperformance.co.uk/ca...i-cupra-20t-fsi-fr-20t-si-20tdi-fr-20tdi-0805

Damian @ DPM Performance

 

[SeatLeonCupra_7]

I have a seat leon Cupra 2010 with Eibach Pro kit Springs 30 mm , wiht this spring is mey Car 25 cm lower